P300A

GENERAL PURPOSE SILICON RECTIFIER P300A THRU P300M VOLTAGE RANGE CURRENT 50 to 1000 Volts 3.0 Ampere FEATURES
Low cost construction.
Low forward voltage drop
Low reverse leakage
High forward surge current capability.
High temperature soldering guaranteed: 260/10 seconds, 0.375" (9.5mm)lead length at 5 lbs (2.3kg) tension. MECHANICAL DATA
Case: transfer molded plastic
Epoxy: UL94V - 0 rate flame retardant.
Polarity: Color band denotes cathode end.
Lead: Plated axial lead, solderable per MIL - STD - 202E method 208C
Mounting position: Any
Weight: 0.042 ounce, 1.19grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20% SYMBOLS P300A P300B VRRM 50 100 VRMS 35 70 VDC 50 100 I(AV) P300D P300G 200 400 140 280 200 400       500 40 30 (-65 to +175) (-65 to +175) P300J P300K P300M 600   420   600   UNIT Volts Volts Volts Amps Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, 0.375" (9.5mm) lead length at TA = 55 Peak Forward Surge Current 8.3ms single half sine - wave superimposed on rated load (JEDEC method ) Maximum Instantaneous Forward Voltage at 3.0A Maximum DC Reverse Current at rated TA = 25 TA  DC blocking voltage Maximum Full Load Reverse Current, full cycle average 0.375" (9.5mm) lead length at TL = 105 Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note2) Operating and Storage Temperature Range Storage Temperature Range NOTES: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. IFSM VF IR IR(AV) CJ RθJA TJ TSTG Amps Volts A A pF /W   2. Thermal Resistance from Junction to Ambient at 0.375" (9.5mm) lead length, P.C. board mounted with 0.8" X 0.8" (20 X 20mm) copper heatsink. MIC INVESTMENTS (CHINA) COMPANY LIMITED RATINGS AND CHARACTERISTIC CURVES P300A THRU P300M FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, 3.0 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 200 PEAK FORWARD SURGE (JEDEC Method) 100 80 8.3ms Single Half Sine-Wave T =T j j max CURRENT, (A) 2.0 (A) 60 Single Phase Half Wave 60Hz 40 1.0 Resistive or Inductive Load 0.375"(9.5mm) Lead Length 20 1 Cycle 0 0 0.1 25 50 55 75 100 125 150 175 10 1 2 4 6 8 10 20 40 60 80 100 AMBIENT TEMPERATURE, ( ° C) NUMBER OF CYCLES AT 60 Hz FIG.3-TYPICAL INSTANTANEOUS FIG.4-TYPICAL REVERSE 100 CHARACTERISTICS 20 10 INSTANTANEOUS FORWARD CURRENT, 10 INSTANTANEOUS REVERSE CURRENT, Tj =100 ° C 1.0 (A) 1.0 Tj =25 ° C 1% Duty Cycle 0.1 (uA) 0.1 Tj =25 ° C 0.01 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK INSTANTANEOUS FORWARD VOLT AGE,(V) REVERSE VOLTAGE,(%) FIG.5-TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE,(pF) 10 T =25 ° C j f=1MHz V sig =50mV p-p 1 0.1 1.0 100 REVRESE VOLTAGE,(V)