P6KE27A

PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR P6KE6.8 THRU P6KE440CA(GPP) P6KE6.8J THRU P6KE440CAJ(OPEN JUNCTION) FEATURES • • • • • • • • Breakdown Voltage Peak Pulse Power 6.8 to 440 Volts 600 Watts DO-204AC (DO-15) .034(0.86) DIA. .028(0.71) 1.0(25.4) MIN. Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass passivated or silastic guard junction (open junction) 600W peak pulse power capability with a 10/1000μs Waveform, repetition rate (duty cycle): 0.01% Excellent clamping capability Low incremental surge resistance Fast response time: typically less than 1.0ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bidirectional types Typical ID less than 1.0μA above 10V High temperature soldering guaranteed: 265℃/10 seconds, 0.375” (9.5mm) lead length, 51bs.(2.3kg) tension Cass: JEDEC DO-204AC,molded plastic body over passivated junction Terminals: Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color bands denotes positive end (cathode) except for bidirectional types Mounting position: any Weight: 0.015 ounces, 0.4 gram .300 (7.6) .230 (5.8) .140 (3.6) 1.0(25.4) MIN. .104 (2.6) DIA. MECHANICAL DATA • • • • • Dimensions in inches and (millimeters) DEVICES FOR BIDRECTIONAL APPLICATIONS • • For bidirectional use C or CA Suffix for types P6KE6.8 thru P6K440 (e.g. P6KE6.8C, P6KE440CA). Electrical Characteristics apply in both directions. Suffix A denotes ±5% tolerance device, No suffix A denotes ±10% tolerance device Ratings at 25℃ ambient temperature unless otherwise specified Ratings Peak Pulse power dissipation with a 10/1000μs waveform(NOTE1,FIG.1) Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.3) Steady Stage Power Dissipation at TL=75℃ Lead lengths 0.375”(9.5)(Note2) Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (Note3) Maximum instantaneous forward voltage at 50.0A for unidirectional only (NOTE 4) Operating Junction and Storage Temperature Range MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Symbols PPPM IPPM PM(AV) Value Minimum 400 See Table 1 5.0 Unit Watts Watt Amps IFSM 100.0 3.5/5.0 Amps Volts ℃ VF TJ, TSTG 50 to +150 Notes: 1. 2. 3. 4. Non-repetitive current pulse, per Fig.3 and derated above T A=25℃ per Fig.2 Mounted on copper pad area of 1.6×1.6”(40×40mm) per Fig 5. Measured at 8.3ms single half sine-wave or equivalent square wave duty cycle = 4 pulses per minutes maximum. VF=3.0 Volts max. for devices of V (BR) ≤200V, and VF=5.0V for devices of V(BR)≥200v E-mail: sales@cnmic.com Web Site: www.cnmic.com PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR P6KE6.8 THRU P6KE440CA(GPP) P6KE6.8J THRU P6KE440CAJ(OPEN JUNCTION) Electrical Characteristic at (TA =25℃ unless otherwise noted) Breakdown Voltage at Test Current IT Device Type MIN VBR(V) Note 1 P6KE6.8/J P6KE6.8A/J P6KE7.5/J P6KE7.5A/J P6KE8.2/J P6KE8.2A/J P6KE9.1/J P6KE9.1A/J P6KE10/J P6KE10A/J P6KE11/J P6KE11A/J P6KE12/J P6KE12A/J P6KE13/J P6KE13A/J P6KE15/J P6KE15A/J P6KE16/J P6KE16A/J P6KE18/J P6KE18A/J P6KE20/J P6KE20A/J P6KE22/J P6KE22A/J P6KE24/J P6KE24A/J P6KE27/J P6KE27A/J P6KE30/J P6KE30A/J P6KE33/J P6KE33A/J P6KE36/J P6KE36A/J P6KE39/J P6KE39A/J P6KE43/J P6KE43A/J P6KE47/J P6KE47A/J P6KE51/J P6KE51A/J P6KE56/J P6KE56A/J P6KE62/J 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9 9.5 9.9 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18 19 19.8 20.9 21.6 22.8 24.3 25.7 27 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 55.8 7.48 7.14 8.25 7.88 9.02 8.61 10 9.55 11 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22 21 24.2 23.1 26.4 25.2 2937 28.4 33 31.5 36.3 34.7 39.6 37.8 42.9 41 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 68.2 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5.5 5.8 6.05 6.4 6.63 7.02 7.37 7.78 8.1 8.55 8.92 9.4 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 MAX IT(mA) VWM Stand-off Voltage Maximum Reverse Leakage at VWM ID(μ A) Note 3 1000 1000 500 500 200 200 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Maximum Peak Pulse Current IPPM ( A) Note 2 55.6 57.1 51.3 53.1 48.0 49.6 43.6 44.8 40.0 41.4 37 38.5 34.7 35.9 31.6 33.0 27.3 28.3 25.5 26.7 22.6 23.8 20.6 21.7 18.8 19.6 17.6 18.1 15.3 16.0 13.8 14.5 12.6 13.1 11.5 12.0 10.6 11.1 9.7 10.1 8.8 9.3 8.2 8.6 7.5 7.8 6.7 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15 14.5 16.2 15.6 17.3 16.7 19 18.2 22 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77 89 0.067 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.061 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.09 0.09 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.1 0.1 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.104 Maximum Clamping Voltage at IPPM VC ( V) Maximum Temperature Coefficient of VBR XVZ(%℃) Breakdown Voltage Peak Pulse Power 6.8 to 440 Volts 600 Watts E-mail: sales@cnmic.com Web Site: www.cnmic.com PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR P6KE6.8 THRU P6KE440CA(GPP) P46KE6.8J THRU P6KE440CAJ(OPEN JUNCTION) Electrical Characteristic at (TA =25℃ unless otherwise noted) Device Type MIN VBR(V) Note 1 P6KE62A/J P6KE68/J P6KE68A/J P6KE75/J P6KE75A/J P6KE82/J P6KE82A/J P6KE91/J P6KE91A/J P6KE100/J P6KE100A/J P6KE110/J P6KE110A/J P6KE120/J P6KE120A/J P6KE130/J P6KE130A/J P6KE150/J P6KE150A/J P6KE160/J P6KE160A/J P6KE170/J P6KE170A/J P6KE180/J P6KE180A/J P6KE200/J P6KE200A/J P6KE220/J P6KE220A/J P6KE250/J P6KE250A/J P6KE300/J P6KE300A/J P6KE350/J P6KE350A/J P6KE400/J P6KE400A/J P6KE440/J P6KE440A/J 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90 95 99 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 198 /209 225 237 270 285 315 332 360 380 396 418 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 85.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 263 330 315 385 368 440 420 484 462 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 53 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81 85.5 89.2 94 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 Breakdown Voltage at Test Current IT MAX IT(mA) VWM Stand-off Voltage Maximum Reverse Leakage at VWM ID(μ A) Note 3 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Maximum Peak Pulse Current IPPM ( A) Note 2 7.1 6..1 6.5 5.6 5.8 5.1 5.3 4.6 4.8 4.2 4.4 3.8 3.9 3.5 3.6 3.2 3.4 2.8 2.9 2.6 2.7 2.5 2.6 2.3 2.4 2.1 2.2 1.7 1.8 1.7 1.7 1.4 1.4 1.2 1.2 1.0 1.1 0.95 1.0 85 98 92 108 103 116 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 571 548 631 602 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.11 0..11 0.11 0.11 0..11 0.11 0.11 0.11 0.11 0.11 Maximum Clamping Voltage at IPPM VC ( V) Maximum Temperature Coefficient of VBR XVZ(%℃) Breakdown Voltage Peak Pulse Power 6.8 to 440 Volts 600 Watts Notes: (1) (2) (3) V(BR) measured after IT a pplied for 300ms IT = square wave pulse or equivalent Surge current waveform per Figure 3 and derate per Fig.2 For bidirectional type having VWM of 10 volts and less, the l D limit is doubled E-mail: sales@cnmic.com Web Site: www.cnmic.com PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR P6KE6.8 THRU P6KE440CA(GPP) P6KE6.8J THRU P6KE440CAJ(OPEN JUNCTION) Breakdown Voltage Peak Pulse Power 6.8 to 440 Volts 600 Watts RATING AND CHARACTERISTIC CURVES P6KE6.8/J THRU P6KE440CA/J PEAK PULSE POWER (PP P ) OR CURRENT(IP P ) DERATING IN PERCENTAGE % FIG.1- PEAK PULSE POWER RATING CURVE 100 FIG.2- PULSE DERATING CURVE 100 P P P M , PEAK PULSE POWER, kW Non-Repetitive Pulse Waveform Show in Figure 3 TA=25 ℃ 10 75 50 1.0 25 0.1 0.1μs 1.0μs 10μs 100μs 1.0ms 10ms 0 0 t d ,PULSE WIDTH, us FIG.3- PULSE WAVEFORM 150 Pulse Width (td) as the Point Where the Peak Current Decays to 50% of lpp 25 50 75 100 125 150 175 TA , AMBIENT TEMPERATURE (℃) IP P M , PEAK PULSE CURRENT-% tf=10use Peak Value lppm FIG.4- STEADY STATE POWER DERATING CURVE 6 PW STEADY STATE POWER DISSIPATION,( W) 100 5 4 3 2 1 0 1.6"×1.6"×0.04" (40×40×1mm) Copper Heat Sinks 0 25 50 75 100 0.375 60HZ Resistive or inductiive Load Half Value-lpp 2 50 10/1000usec Waveform as Defined by R.E.A. 0.01 0.6 1.0 2.0 3.0 4.0 125 150 175 t, TIME, ms FIG.5- TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL 10 4 TL , LEAD TEMPERATURE (℃) FIG.6- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL IF S M , PEAK FORWARD SURGE CURRENT. Measured at Zero Bias 200 8.3ms Single Half Since-Wave (JEDEC Method) Tj = T jmax CJ, JUNCTION CAPACITANCE, pF 103 Measured at V MW 100 10 2 1 Cycle 10 1 100 Tj=25℃ f=1.0MHZ Vsig=50mVp-p 10 1.0 10 100 1000 NUMBER OF CYCLES AT 60 Hz V(BR),BREAKDOWN VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com