PR1600

PHOTOFLASH RECTIFIER PR1000 THRU PR1600 VOLTAGE RANGE CURRENT 1000 to 1600 Volt 0.5 Ampere FEATURES
Fast switching.
Low leakage
High forward surge current capability.
High temperature soldering guaranteed: 260/10 seconds, 0.375" (9.5mm)lead length at 5 lbs (2.3kg) tension. MECHANICAL DATA
Case: transfer molded plastic
Epoxy: UL94V - 0 rate flame retardant.
Polarity: Color band denotes cathode end.
Lead: Plated axial lead, solderable per MIL - STD - 202E method 208C
Weight: 0.012 ounce, 0.33grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20% SYMBOLS VRRM VRMS VDC I(AV) PR1000    PR1200        A IR(AV) trr CJ TJ, TSTG    (-65 to +175) Ns pF  PR1400    PR1600    UNIT Volts Volts Volts mAmps Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, 0.375" (9.5mm) lead length at TA = 55 Peak Forward Surge Current 8.3ms single half sine - wave superimposed on rated load (JEDEC method ) Maximum Instantaneous Forward Voltage Drop at 0.5 A Maximum DC Reverse Current at rated DC blocking voltage at TA = 25 Maximum Full Load Reverse current, full cycle average, 0.375" (9.5mm) lead length at TL = 55 Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range NOTES: 1.Test condition: IF = 0.5A, IR = 1.0A, IRR=0.25A 2.Measured at 1 MHz and applied reverse of 4.0 volts. IFSM VF IR Amps Volts MIC INVESTMENTS (CHINA) COMPANY LIMITED RATINGS AND CHARACTERISTIC CURVES PR1000 THRU PR1600 FIG.2-MAXIMUM NON-REPETITIVE PEAK FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, PEAK FORWARD SURGE 20 FORWARD SURGE CURRENT 500 (JEDEC Method) 8.3ms Single Half Sine-Wave T =T j j max CURRENT, (A) (mA) Single Phase 10 200 Half Wave 60Hz Resistive or Inductive Load 0.375''(9.5mm) lead length 1 Cycle 0 0 25 50 55 75 100 125 150 175 0 1 2 4 6 8 10 20 40 60 100 AMBIENT TEMPERATURE, ( ° C) NUMBER OF CYCLES AT 60 Hz FIG.4-TYPICAL JUNCTION CAPACITANCE FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 100 INSTANTANEOUS FORWARD CURRENT, JUNCTION CAPACITANCE,(pF) 1.0 10 (A) Tj =25 ° C f=1MHz V sig =50mV p-p 0.1 1 T =25 ° C Pulse Width=300uS 1% Duty Cycle j 0.1 1.0 10 100 REVRESE VOLTAGE,(V) 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLT AGE,(V) FIG.5-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC Trr 50 NONINDUCTIVE 10 NONINDUCTIVE (-) +0.5A (+) 25 Vdc (approx.) (-) D.U.T. PULSE GENERATIOR (NOTE 2) (+) OSCILLOSCOPE (NOTE 1) 0 -0.25A 1 NON INDUCTIVE -1.0A 1cm SET TIME BASE FOR 50/100ns/cm NOTES: 1.Rise Time =7ns max. Input Impedance= 1 megohm. 22pF 2.Rise time=10ns max. Source Impedance= 50 ohms