R1200

R1200 THRU HIGH VOLTAGE SILICON RECTIFIER VOLTAGE RANGE 1200 to 5000 Volts R5000 CURRENT 0.2 - 0.5 Amperes FEATURES
Low leakage
High surge capability
High current capability
High temperature soldering guaranteed: 260/10 seconds. 0.375" (9.5mm) lead length at 5lbs. (2.3kg) tension. MECHANICAL DATA
Case: Transfer molded plastic
Epoxy: UL94V - 0 rate flame retardant
Polarity: Color band denotes cathode end.
Lead: Plated slug, solderable per MIL - STD 202 E method 208C
Mounting position: Any
Weight: 0.012 ounce, 0.33grams (DO-41) 0.014 ounce, 0.39 grams (DO-15) (R1200 - R2000) (R2500 - R5000) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20% SYMBOLS VRRM VRMS VDC I(AV) R1200 1200 840 1200 R1500    R1800 R2000         R2500    R3000    R4000    R5000    UNIT Volts Volts Volts mA Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, 0.375" (9.5mm) Lead length at TA = 50 Peak Forward Surge Current 8.3ms single half sine - wave superimposed on rated load (JEDEC method ) Maximum Instantaneous Forward Voltage Drop at 0.5A / 0.2A Maximum DC Reverse Current at rated TA = 25 DC blocking voltage T
 Maximum Full Load Reverse Current, full cycle average 0.375" (9.5mm) lead length at TL = 75 Operating and Storage Temperature Range 500  30 IFSM VF IR  Amps   Volts    A IR(AV) TJ, TSTG  (-65 to +150)  MIC INVESTMENTS (CHINA) COMPANY LIMITED RATINGS AND CHARACTERISTIC CURVES R1200 THRU R5000 FIG.1-TYPICAL FORWARD CURRENT DERTAING CURVE AVERAGE FORWARD CURRENT, Single Phase Falf Wave 60 Hz FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 500 Load 0.375"(9.5mm) Lead Length PEAK FORWARD SURGE Resistive or Inductive 30 (JEDEC Method) 8.3ms Single Half Sine-Wave T =T j j max CURRENT, (A) (mA) 20 R 12 00 200 -R R 25 00 - 20 R 50 00 00 10 1 Cycle 0 0 25 50 75 100 125 150 175 0 1 2 4 6 8 10 20 40 60 100 AMBIENT TEMPERATURE, ( ° C) NUMBER OF CYCLES AT 60 Hz FIG.3-TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, 1.0 (uA) 0.1 Tj =25 ° C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%)