R1200F
THRU
HIGH VOLTAGE SILICON RECTIFIER VOLTAGE RANGE 1200 to 5000 Volts R5000F CURRENT 0.2 - 0.5 Amperes
FEATURES Fast switching Low leakage High surge capability High current capability High temperature soldering guaranteed: 260/10 seconds. 0.375" (9.5mm) lead length at 5lbs. (2.3kg) tension. MECHANICAL DATA Case: Transfer molded plastic Epoxy: UL94V - 0 rate flame retardant Polarity: Color band denotes cathode end. Lead: Plated slug, solderable per MIL - STD 202 E method 208C Mounting position: Any Weight: 0.012 ounce, 0.33grams (DO-41) 0.014 ounce, 0.39 grams (DO-15)
(R1200F - R200
(R2500F - R5000F)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20% SYMBOLS R1200FR1500FR1800FR2000FR2500FR3000FR4000FR5000F UNIT VRRM 1200 Volts VRMS 840
Volts VDC 1200 Volts I(AV) 500 30
A IR(AV) trr TJ, TSTG (-65 to +150) nS
mA
Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, 0.375" (9.5mm) Lead length at TA = 50 Peak Forward Surge Current 8.3ms single half sine - wave superimposed on rated load (JEDEC method ) Maximum Instantaneous Forward Voltage Drop at 0.5A / 0.2A Maximum DC Reverse Current at rated DC blocking voltage TA = 25 Maximum Full Load Reverse Current, full cycle average 0.375" (9.5mm) lead length at TA = 55 Maximum Reverse Recovery Time (Note 1)` Operating and Storage Temperature Range NOTES:
1. Test condition : IF = 0.5A, IR = 1.0A, Irr = 0.25A
IFSM VF IR
Amps
Volts
MIC INVESTMENTS (CHINA) COMPANY LIMITED
RATINGS AND CHARACTERISTIC CURVES R1200F THRU R5000F
FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,
Single Phase Half Wave 60Hz
FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
500
Resistive or Inductive Load 0.375"(9.5mm)
PEAK FORWARD SURGE
30
(JEDEC Method)
8.3ms Single Half Sine-Wave T =T j j max
CURRENT, (A)
(mA)
Lead Length
20
R1
20
0F -R
200
20
00
R25
F
00F
-R5
000
F
10
1 Cycle
0 0 25 50 75 100 125 150 175 0 1 2 4 6 8 10 20 40 60 100
AMBIENT TEMPERATURE, ( ° C)
NUMBER OF CYCLES AT 60 Hz
FIG.3-TYPICAL REVERSE CHARACTERISTICS
10
INSTANTANEOUS REVERSE CURRENT,
FIG.4-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC
1.0
50 NONINDUCTIVE 10 NONINDUCTIVE (-) (+) 25 Vdc (approx.) (-) D.U.T. PULSE GENERATIOR (NOTE 2) (+) OSCILLOSCOPE (NOTE 1)
Trr
+0.5A
(A)
0 -0.25A
0.1 Tj =25 ° C
1 NON INDUCTIVE
-1.0A
1cm
0.01 0 40 80 120
NOTES: 1.Rise Time =7ns max. Input Impedance= 1 megohm. 22pF 2.Rise time=10ns max. Source Impedance= 50 ohms
SET TIME BASE FOR 50/100ns/cm
PERCENT OF RATED PEAK REVERSE VOLTAGE,(%)
很抱歉,暂时无法提供与“R1500F”相匹配的价格&库存,您可以联系我们找货
免费人工找货