R2500F

R1200F THRU HIGH VOLTAGE SILICON RECTIFIER VOLTAGE RANGE 1200 to 5000 Volts R5000F CURRENT 0.2 - 0.5 Amperes FEATURES
Fast switching
Low leakage
High surge capability
High current capability
High temperature soldering guaranteed: 260/10 seconds. 0.375" (9.5mm) lead length at 5lbs. (2.3kg) tension. MECHANICAL DATA
Case: Transfer molded plastic
Epoxy: UL94V - 0 rate flame retardant
Polarity: Color band denotes cathode end.
Lead: Plated slug, solderable per MIL - STD 202 E method 208C
Mounting position: Any
Weight: 0.012 ounce, 0.33grams (DO-41) 0.014 ounce, 0.39 grams (DO-15) (R1200F - R200 (R2500F - R5000F) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20% SYMBOLS R1200FR1500FR1800FR2000FR2500FR3000FR4000FR5000F UNIT VRRM 1200        Volts VRMS 840          Volts VDC 1200        Volts I(AV) 500  30    A IR(AV) trr TJ, TSTG   (-65 to +150) nS    mA Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, 0.375" (9.5mm) Lead length at TA = 50 Peak Forward Surge Current 8.3ms single half sine - wave superimposed on rated load (JEDEC method ) Maximum Instantaneous Forward Voltage Drop at 0.5A / 0.2A Maximum DC Reverse Current at rated DC blocking voltage TA = 25 Maximum Full Load Reverse Current, full cycle average 0.375" (9.5mm) lead length at TA = 55 Maximum Reverse Recovery Time (Note 1)` Operating and Storage Temperature Range NOTES: 1. Test condition : IF = 0.5A, IR = 1.0A, Irr = 0.25A IFSM VF IR Amps Volts MIC INVESTMENTS (CHINA) COMPANY LIMITED RATINGS AND CHARACTERISTIC CURVES R1200F THRU R5000F FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, Single Phase Half Wave 60Hz FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 500 Resistive or Inductive Load 0.375"(9.5mm) PEAK FORWARD SURGE 30 (JEDEC Method) 8.3ms Single Half Sine-Wave T =T j j max CURRENT, (A) (mA) Lead Length 20 R1 20 0F -R 200 20 00 R25 F 00F -R5 000 F 10 1 Cycle 0 0 25 50 75 100 125 150 175 0 1 2 4 6 8 10 20 40 60 100 AMBIENT TEMPERATURE, ( ° C) NUMBER OF CYCLES AT 60 Hz FIG.3-TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, FIG.4-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 1.0 50 NONINDUCTIVE 10 NONINDUCTIVE (-) (+) 25 Vdc (approx.) (-) D.U.T. PULSE GENERATIOR (NOTE 2) (+) OSCILLOSCOPE (NOTE 1) Trr +0.5A (A) 0 -0.25A 0.1 Tj =25 ° C 1 NON INDUCTIVE -1.0A 1cm 0.01 0 40 80 120 NOTES: 1.Rise Time =7ns max. Input Impedance= 1 megohm. 22pF 2.Rise time=10ns max. Source Impedance= 50 ohms SET TIME BASE FOR 50/100ns/cm PERCENT OF RATED PEAK REVERSE VOLTAGE,(%)