RL106F

FAST RECOVERY RECTIFIER RL101F THRU RL107F FEATURES • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 1.0 Ampere Low coat construction Fast switching for high efficiency. Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 260℃/10 secods/.375”(9.5mm)lead length at 5 lbs(2.3kg) tension A-405 1.0(25.4) MIN. .205(5.2) .166(4.2) MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-O rate flame retardant Polarity: Color band denotes cathode end Lead: Plated axial lead, solderable per MIL-STD-202E method 208C Mounting position: Any Weight: 0.00081 ounce, 0.23 grams .107(2.7) DIA. .080(2.0) 1.0(25.4) MIN. .025(0.6) .021(0.5) DIA. D imensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25OC ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current 0.375”(9.5mm) lead length at T A= 75℃ Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current at Rated DC Blocking Voltage T A = 25℃ TA = 100℃ VRRM VRMS VDC I(AV) IFSM VF IR trr CJ RθJA TJ TSTG RL 101F 50 35 50 RL 102F 100 70 100 RL 103F 200 140 200 RL 104F 400 280 400 1.0 30 1.3 5.0 100 250 15 50 RL 105F 600 420 600 RL 106F 800 560 800 RL 107F 1000 700 1000 UNITS Volts Volts Volts Amps Amps Volts µA Maximum Reverse Recovery Tine (Note 3) TL=25℃ Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range 150 500 ns pF ℃/W ℃ ℃ (-55 to +150) (-55 to +150) Notes: 1.Measured at 1.0MHz and Applied Reverse Voltage of 4.0Volits. 2. Thermal Resistance from junction to Ambient at .375”(9.5mm)lead length, P.C.board mounted. 3.Reverse Recovery Test Conditions:If=0.5A,Ir=1.0A,Irr=0.25A E-mail: sales@cnmic.com Web Site: www.cnmic.com FAST RECOVERY RECTIFIER RL101F THRU RL107F VOLTAGE RANGE CURRENT 50 to 1000 Volts 1.0 Ampere RATING AND CHRACTERISTIC CURVES RL101F Thur RL107F FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 1 .2 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 AVERAGE FORWARD CURRENT, PEAK FORWARD SURGE 1.0 25 0.8 CURRENT, (A) 20 8.3ms Single Half Sine-Wave (JEDEC Method) =T T j jmax ( A) 0.6 0.4 Single Phase Half Wave 60Hz Resistive or 10 0.2 0 0 Inductive Load 25 50 75 100 125 150 175 0 1 2 5 8 10 20 50 100 AMBIENT TEMPERATURE, (° C) NUMBER OF CYCLES AT 60 Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 10 FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (mA) INSTANTANEOUS FORWARD CURRENT, 1 10 (A) Tj =100° C 0.1 T =25° C j 1.0 Pulse Width=300us 1% Duty Cycle 0.01 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Tj =25° C 0.1 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE,(V) PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) FIG.5-TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE,(pF) 10 TJ=25 ° C F=1MHz 10 0.1 1.0 4.0 10.0 100 REVERSE VOLTAGE,(VOLTS) E-mail: sales@cnmic.com Web Site: www.cnmic.com