RSM102

SURFACE MOUNT RECTIFIER GLASS PASSIVATED FAST RECOVERY RECTIFIER RSM101 THRU RSM107 FEATURES • • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 1.0 Ampere For surface mounted applications Glass passivated chip junction Low leakage current Fast switching speed Plastic package has underwrites laboratory flammability Classification 94V-0 High temperature soldering guaranteed 250℃/10 second at terminals DO-213AB MECHANICAL DATA • • • • Case: molded plastic Polarity: band indicate cathode Mounting position: Any Weight: 0.12 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% RSM RSM SYMBOLS 101 102 Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 M aximum Average Forward Rectified Current T T=100 ℃ I(AV) • • • Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current at rated DC Blocking Voltage at T A = 25℃ TA = 125℃ RSM 103 200 140 200 RSM 104 400 280 400 1.0 30 1.3 5.0 100 RSM 105 600 420 600 RSM 106 800 560 800 RSM 107 1000 700 1000 UNIT Volts Volts Volts Amps Amps Volts µA IFSM VF IR Trr CJ RθJT TJ,TSTG 150 Typical Reverse Recovery Time (NOTE 1) TJ=25℃ Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range 250 15 40 -55 to +150 500 nS PF ℃/W ℃ Notes: 1. Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A 2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts DC. 3. Thermal resistance from Junction to terminal 6.0mm2 copper pads to each terminal. E-mail: sales@cnmic.com Web Site: www.cnmic.com SURFACE MOUNT RECTIFIER GLASS PASSIVATED FAST RECOVERY RECTIFIER RSM101 THRU RSM107 VOLTAGE RANGE CURRENT 50 to 1000 Volts 1.0 Ampere F1G.1-FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT(A) 1.25 Resistive or Inductive Load 1.0 30 F1G.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE C UR RENT,(A) TL=T J max 8.3ms Single Half Sine-Wave (JEDEC Method) 25 0.75 20 0.5 15 0.25 10 0 25 50 75 100 125 150 175 0 1 10 100 LEAD TEMPERATURE,(℃) F1G.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 NUMBER OF CYCLES AT 60Hz F1G.4-TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT, (A) INSTANTANEOUS REVERSE Leakage CURRENT,(uA) 1.0 TJ =25℃ Pulse Width=300us 1% Duly Cycle 10 1.0 TJ =100℃ 10 TJ =25℃ 0.01 0 20 40 60 80 100 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE,(V) TRANSIENT THERMAL IMPEDANCE(℃/W) F1G.5-TYPICAL JUNCTION CAPACITANCE 100 TJ =25℃ f=1MHz Vsig=50mVp-p PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) F1G.6-TRANSIENT THERMAL IMPEDANCE 100 Mounted on 0.20X0.20 ″(5X7mm) Copper Pad Areas CAPACITANCE,(pF) 10 10 1 1 1.0 10 100 0.1 0.01 0.1 1.0 10 100 REVRESE VOLTAGE, VOLTS T, PULSE DURATION, (SEC.) E-mail: sales@cnmic.com Web Site: www.cnmic.com