S1A

SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER S1A THRU S1M FEATURES • • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 1.0 Ampere DO-214AC(SMA) For surface mounted applications Glass passivated junction Low profile package Built-in strain relief, ideal for automated placement Plastic package has underwrites laboratory flammability Classification 94V-0 High temperature soldering guaranteed: 250℃/10 second at terminals MECHANICAL DATA • • • • • Case: JEDED SMA (DO-214AC) molded plastic Terminals: Plated axial lead solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.002ounce, 0.064 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20% SYMBOLS VRRM VRMS VDC IF(AV) IFSM VF IR RθJA RθJL trr TJ,TSTG S1A 50 35 50 S1B 100 70 100 S1D 200 140 200 S1G 400 280 400 1.0 30 1.1 5.0 50 50 90 1.8 -55 to +150 S1J 600 420 600 S1K 800 560 800 S1M 1000 700 1000 UNIT Volts Volts Volts Amps Amps Volts µA ℃/W Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (see Fig.1) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) T L=90℃ Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current at rated TA = 25℃ DC Blocking Voltage at T = 125℃ A Typical Junction Capacitance (NOTE 1) Typical Thermal Resistance (NOTE 2) Operating and Storage Temperature Range µs ℃ Notes: 1. Thermal resistance from Junction to ambient and from junction to lead mounted on 0.2×0.2″(5.0 × 5.0mm) copper pad areas. 2. Reverse recovery test condition: IF=0.5A, IR=1.0A, Irr=0.25A E-mail: sales@cnmic.com Web Site: www.cnmic.com SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER S1A THRU S1M VOLTAGE RANGE CURRENT 50 to 1000 Volts 1.0 Ampere F1G.1-FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT(A) 1.2 100 F1G.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE T L =90℃ 8.3ms Single Half Sine-Wave (JEDEC Method) Resistive or Inductive Load 1.0 0.8 0.6 CURRENT,(A) 10 0.4 0.2 0.2X0.2″(5.0X5.0mm) Thick Copper Pad Areas 0 20 40 60 80 100 120 140 160 0 1 10 100 0 LEAD TEMPERATURE,(℃) F1G.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 80 NUMBER OF CYCLES AT 60 Hz F1G.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE Leakage CURRENT,(A) 10 INSTANTANEOUS FORWARD CURRENT, (A) T J =25℃ 10 T J =125℃ 1.0 1.0 Pulse Width=300us 1% Duty Cycle 0.1 0.1 T J =75℃ 0.01 T J =25℃ 0.01 0 0.4 0.8 1.2 1.6 2.0 0.001 0 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE,(V) F1G.5-TYPICAL JUNCTION CAPACITANCE TRANSIENT THERMAL IMPEDANCE(℃/W) PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) F1G.6-TRANSIENT THERMAL IMPEDANCE 1,000 JUNCTION CAPACITANCE,(pF) 100 TJ =25℃ f=1MHz Vsig=50mVp-p S1(K,M) 100 10 S1(A,J) 10 Units Mounted on 0.20X0.20″ (5.0X5.0mm) X0.5mil inches (0.013mm) Thick Copper Land Areas 1 0.01 0.1 1.0 10 100 1 0.01 0.1 1.0 10 100 REVRESE VOLTAGE,(V) T, PULSE DURATION (SEC.) E-mail: sales@cnmic.com Web Site: www.cnmic.com