SF14G

SUPER FAST GLASS PASSIVATED RECTIFIER SF11G/RG THRU SF18G/RG FEATURES • • • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 1.0 Ampere DO-41 R-1 Super fast switching speed Glass passivated chip junction Low power loss, high efficiency Low leakage High surge capacity High temperature soldering guaranteed 260℃/10 second, 0.375″(9.5mm) lead length SF11G Packing DO-41, SF11RG Packing R-1. MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Polarity: Color Band denotes cathode end Lead: Plated axial lead, solderable per MIL-STD-202E method 208C Mounting position: Any Weight: 0.012ounce, 0.33 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SF SF SF SF SF SF SF SF SYMBOLS UNIT 11G/RG 12G/RG 13G/RG 14G/RG 15G/RG 16G/RG 17G/RG 18G/RG Maximum Repetitive Peak Reverse Voltage VRRM 50 100 150 200 300 400 500 600 Volts Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 Volts Maximum DC Blocking Voltage VDC 50 100 100 200 300 400 500 600 Volts • • • Maximum Average Forward Rectified Current 0.375″(9.5mm) lead length at T A=55℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current at rated DC Blocking Voltage at T A = 25℃ TA = 125℃ I(AV) IFSM VF IR trr CJ RθJC TJ TSTG 15 0.95 1.0 30 1.25 5.0 50 35 10 60 (-55 to +150) (-55 to +150) 1.7 Amps Amps Volts µA nS pF ℃/W ℃ ℃ Maximum Reverse Recovery Time Test conditions lF=0.5A, lR=1.0A, lRR=0.25A Typical Junction Capacitance ( Measured at 1.0MHz and applied reverse voltage of 4.0V) Typical Thermal Resistance (NOTE 1) Operating Junction Temperature Range Storage Temperature Range Notes: 1. Thermal resistance from junction to ambient with 0.375″(9.5mm) lead length, PCB mounted. E-mail: sales@cnmic.com Web Site: www.cnmic.com SUPER FAST GLASS PASSIVATED RECTIFIER SF11G/RG THRU SF18G/RG VOLTAGE RANGE CURRENT 50 to 1000 Volts 1.0 Ampere RATING AND CHRACTERISTIC CURVES SF11G/RG THRU SF18G/RG FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, 1 .2 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FOR WARD SURGE 1.0 30 C URRENT, (A) 8.3ms Single Half Sine-Wave (JEDEC Method) T= T jmax 20 0.8 (A) 0.6 0.4 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375 ″(9.5mm) Lead Length 10 0.2 1 Cycle 100 125 150 175 0 1 2 4 6 8 10 20 40 60 100 0 0 25 50 55 75 AMBIENT TEMPERATURE, ( ° C) NUMBER OF CYCLES AT 60 Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 FIG.4-TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS FORWAR D CURRENT, 4G -1 RG /R 1.0 G/ 15 SF SF S F1 (A) 0.1 TJ =25° C Pulse Width=300us 1% Duty Cycle (μA) 7G 11 /R G G 8 -1 G G -1 /R G INSTANTAN EOUS REVERSE CUR REN T, G /R 6G /R G TJ =125 ° C 10 1.0 TJ =25 ° C 0.01 0.1 0 20 40 60 80 100 120 140 0.001 0.4 PERCENT OF RATED PEAK 0.6 0.8 1.0 1.2 1.4 1.6 1.8 REVERSE VOLTAGE,(%) INSTANTANEOUS FORWARD VOLTAGE,(V) FIG.5-TYPICAL JUNCTION CAPACITANCE 100 SF11G-SF14/G JUN CTION CAPACITANCE,(pF) SF15G-SF18/G F1G.6-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC Trr 50Ω 10 Ω NONINDUCTIVE NONINDUCTIVE (-) 10 (+) 25 Vdc (approx.) (-) T J =25 ° C f=1MHz Vsig=50mVp-p D.U.T. PULSE GENERATIOR (NOTE 2) (+) OSCILLOSCOPE (NOTE 1) +0.5A 0 -0.25A 1Ω NON INDUCTIVE -1.0A 1cm 1.0 0.1 1.0 10 100 REVERSE VOLTAGE,(V) NOTES : 1.Rise Time=7ns mas. Input Impedance= 1 magohm. 22pF 2.Rise time=10ns max. Source Impedance= 50 ohms SET TIME BASE FOR 50/100ns/cm E-mail: sales@cnmic.com Web Site: www.cnmic.com