SF301P

SUPER FAST GLASS PASSIVATED RECTIFIER SF301P THRU SF304P FEATURES • • • • • • • VOLTAGE RANGE CURRENT 50 to 200 Volts 30.0 Ampere TO-3P(TO-247AD) Glass passivated chip junction Low power loss, high efficiency Low leakage Super fast switching speed High surge capacity High temperature soldering guaranteed 250℃/10 second, 0.16″(4.06mm) lead length Also available with common Anode, add an “A” suffix, i.e. SF301PA, add as a doubler, add a “D” suffix, i.e. SF301PD MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Solderable per MIL-STD-202E method 208C Polarity: as marked Mounting position: Any, 10 in-lbs Torque Max Weight: 0.22ounce, 6.3 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS SF301P Maximum Repetitive Peak Reverse Voltage VRRM 50 Maximum RMS Voltage VRMS 35 Maximum DC Blocking Voltage VDC 50 • • • Maximum Average Forward Rectified Current At Tc=100℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage per at 15.0A Maximum DC Reverse Current at rated TA = 25℃ DC Blocking Voltage at TA = 125℃ Maximum Reverse Recovery Time Test conditions IF =0.5A, IR =1.0A, IRR =0.25A Typical Junction Capacitance ( Measured at 1.0MHz and applied reverse voltage of 4.0V) Typical Thermal Resistance (Note 1) Operating Junction Temperature Storage Temperature Range SF302P 100 70 100 30 250 1.0 10 500 35 60 SF303P 150 105 150 SFF304P 200 140 200 UNIT Volts Volts Volts Amps Amps Volts µA nS pF ℃/W ℃ ℃ I(AV) IFSM VF IR trr CJ RθJC TJ TSTG 1.5 (-55 to +150) (-55 to +150) Notes: 1. Unit mounted on heatsink E-mail: sales@cnmic.com Web Site: www.cnmic.com SUPER FAST GLASS PASSIVATED RECTIFIER SF301P THRU SF304P VOLTAGE RANGE CURRENT 50 to 200 Volts 30.0 Ampere RATING AND CHRACTERISTIC CURVES SF301P THRU SF304P FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, PEAK FORWARD SURGE F IG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 36 300 30 CURRENT, (A) 8.3ms Single Half Sine-Wave (JEDEC Method) T= Tjmax 200 (A) 24 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 12 100 6.0 1 Cycle 0 0 25 50 75 100 125 150 175 0 1 2 4 6 8 10 20 40 60 100 AMBIENT TEMPERATURE, (° C) NUMBER OF CYCLES AT 60 Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS PER LEG FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 100 TJ =125° C 100 INSTANTANEOUS FORWARD CURRENT, INSTANTANEOUS REVERSE CURRENT, (μA) 10 10 (A) 1.0 1.0 TJ=25° C TJ =25° C Pulse Width=300us 1% Duty Cycle 0.1 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0.1 INSTANTANEOUS FORWARD VOLTAGE,(V) 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK FIG.5-TYPICAL JUNCTION CAPACITANCE PER LEG 300 REVERSE VOLTAGE,(%) JUNCTION CAPACITANCE,(pF) 250 200 150 100 TJ =25 ° C f=1MHz Vsig=50mVp-p 50 1 0.1 1.0 10 100 1000 REVERSE VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com