SOZA163

SOZA CELL SOZA161 THRU SOZA166 TECHNICAL SPECIFICATION： FEATURES • • • • VOLTAGE RANGE CURRENT 100 to 600 Volts 16.0 Amperes Low Leakage Low forward voltage drop High current capability High forward surge current capacity .224(5.7) .217(5.5) DIA MECHANICAL DATA • • • • • Copper slug Technology: cell with vacuum soldered Polarity: red dots denotes cathode end Mounting Position: Any Weight: 0.0124 ounces, 0.35 grams 0.086(2.20) 0.078(2.0) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS SOZA161 100 70 100 SOZA162 200 140 200 SOZA163 300 210 300 16.0 SOZA164 400 280 400 SOZA166 600 420 600 UNIT Volts Volts Volts Amps Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At Tc=110℃ Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Maximum instantaneous Forward Voltage at 80A Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage per element Typical Thermal Resistance Operating and Storage Temperature Range TA=100℃ VRRM VRMS VDC IO IFSM VF IR RθJC TJ,TSTG 300 1.10 5.0 250 0.8 (-65 to +175) Amps Volts UA ℃/W ℃ Notes: 1. Enough heatsink must be considered in application. E-mail: sales@cnmic.com Web Site: www.cnmic.com SOZA CELL SOZA161 THRU SOZA166 VOLTAGE RANGE CURRENT 100 to 600 Volts 16.0 Amperes RATINGS AND CHARACTERISTIC CURVES SOZA161 THRU SOZA166 F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE AVERAGE FORWARD CURRENT, (A) F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) 16 15 12.5 10 7.5 Single Phase 5.0 2.5 0 0 25 50 75 100 125 150 175 Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 400 8.3ms Single Half Sine-Wave (JEDEC Method) Tj=Tj max 300 200 1 Cycle 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE, (℃) F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) 30 INSTANTANEOUS FORWARD CURRENT, (A) 100 20 SQUARE WAVE DC 10 10 T1=25℃ PULSE WIDTH=300μS 1%DUTY CYCLE 1.0 0 0 5 10 15 20 25 AVERAGE FORWARD CURRENT, (A) 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com