SR30200P

SCHOTTKY BARRIER RECTIFIER SR3020P THRU SR30100P FEATURES • VOLTAGE RANGE CURRENT 20 to 100 Volts 30.0 Amperes • • • • • Plastic package has Underwriters Laboratory Flammability classification 94V-O utilizing Flame Retardant Epoxy Molding Compound Exceeds environmental standards of MILS-19500/228 Low power loss,high efficiency Low forward voltage, high current capability High surge capacity For use in low voltage, high frequency inverters. Free wheeling, and polarity protection applications TO-3P(TO-247AD) MECHANICAL DATA • • • • • Case: TO-3P molded Plastic Terminals: Lead solderable per MIL-STD-202, Method 208 Polarity: as marked Mounting position: Any Weight: 0.2ounce, 5.6 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS SR 3020P SR 3030P SR 3035P SR 3040P SR 3045P SR 3050P SR 3060P SR 3080P SR30 100P SR30 150P SR30 200P Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current At Tc=110℃ Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 15.0A per element Maximum DC Reverse Current at rated DC Blocking Voltage per element T C = 25℃ TC = 100℃ VRRM VRMS VDC I(AV) IFSM VF IR CJ RθJC TJ TSTG 20 14 20 30 21 30 35 25 35 40 28 40 45 32 45 50 35 50 30.0 250 60 42 60 80 56 80 100 70 100 150 105 150 200 140 200 UNIT Volts Volts Volts Amps Amps 0.65 0.72 1.0 100 500 1.2 (-55 to +150) 0.75 0.85 Volts mA pF ℃/W ℃ Typical Junction Capacitance Range Typical Thermal Resistance (Note 1) Operating Storage Temperature Range Notes: 1. Thermal Resistance Junction to Ambient 2. Measured at VR=4v and f=1MHz E-mail: sales@cnmic.com Web Site: www.cnmic.com SCHOTTKY BARRIER RECTIFIER SR3020P THRU SR30100P VOLTAGE RANGE CURRENT 20 to100 Volts 30.0 Ampere RATINGS AND CHARACTERISTIC CURVES SRF1620 THRU SRF16100 FIG.1-FORWARD CURRENT DERATING CURVE 40 250 FIG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT AVERAGE FORWARD CURRENT, AMPERES PEAK FORWARD SURGE CURRENT,AMPERES 30 200 20 150 10 RESISTIVE OR INDUCTIVE LOAD 100 8.3ms S ingle H alf S ine- Wave JEDEC Method 0 1 2 5 10 20 50 100 0 25 50 75 100 125 150 170 CASE TEMPERATURE(℃) FIG.3-TYPICAL REVERSE CHARACTERISTICS 100 100 NUMBER OF CYCLES AT 60Hz FIG.4-TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (mA) 10 Tj =125℃ INSTANTANOUS FORWARD CURRENT, (A) 10 1.0 Tj =75℃ SR3020P-SR3045P SR3050P-SR30100P 1.0 0.1 Tj = 25 ℃ 0.01 Tj = 25 ℃ Pulse Width=300μ s 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) INSTANTANEOUS FORWARD VOLTAGE,VOLTS FIG.5-TYPICAL JUNCIONCAPACITANCE 10000 CAPACITANCE,pF 1000 Tj = 25 ℃ F=1MHz 100 0.1 1 4 10 100 REVERSE VOLTAGE,VOLTS E-mail: sales@cnmic.com Web Site: www.cnmic.com