SR602

SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE CURRENT 50 to 100 Volts 6.0 Ampere SR602 THRU SR610 FEATURES • • • • • Fast switching speed Low forward voltage Low power high efficiency High surge capability High temperature soldering guaranteed 250℃/10 seconds,0.373”(9.5mm)lead length R-6 1.0(25.4) MIN. .052(1.3) .048(1.2) DIA. .360(9.1) .340(8.6) MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Plated axial lead, solderable per MIL-STD-202E method 208C Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.07ounce, 2.0 gram .360(9.1) DIA. .340(8.6) 1.0(25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS SR602 SR603 Maximum Repetitive Peak Reverse Voltage VRRM 20 30 Maximum RMS Voltage VRMS 14 21 Maximum DC Blocking Voltage VDC 20 30 • • • Maximum Average Forward Rectified Current 0.375”(9.5)Lead length,(Note 1)See Fig..1 TL = 60℃(SR602-604) TL = 85℃(SR605-610) SR604 40 28 40 SR605 50 35 50 6.0 150 SR606 60 42 60 SR608 80 56 80 SR610 100 70 100 UNIT Volts Volts Volts Amps Amps I(AV) IFSM VF IR CJ RθJL TJ TSTG 550 0.57 Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 6.0A Maximum DC Reverse Current at rated DC blocking Voltage (Note 1) Typical Junction Capacitance (Measured at 1.0MHz and applied reverse voltage of 4.0V) T A = 25℃ TA = 100℃ 0.70 1.0 50 450 10 (-55 to +150) (-55 to +150) 0.85 Volts µA 350 pF ℃/W ℃ ℃ Typical Thermal Resistance Operating Junction Temperature Range Storage Temperature Range Notes: 1. Pulse test:300μs pulse width,1% duty cycle E-mail: sales@cnmic.com Web Site: www.cnmic.com SCHOTTKY BARRIER RECTIFIER SR602 THRU SR610 VOLTAGE RANGE CURRENT 20 to 100 Volts 6.0 Amperes RATING AND CHRACTERISTIC CURVES SR602 THRU SR610 FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, 6.0 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE 5.0 150 4.0 CURRENT, (A) 8.3ms Single Half Sine-Wave (JEDEC Method) T= Tjmax j 100 SR 50 R5 5-S 50 SR (A) 3.0 Single Phase Half Wave 60Hz 5-S R5 10 2.0 Inductive or Resistive Load 0.375″(9.5mm) Lead Length 10 50 1.0 1 Cycle 0 0 25 50 60 75 85 100 125 150 175 0 1 2 4 6 8 10 20 40 60 100 AMBIENT TEMPERATURE, ( ° C) NUMBER OF CYCLES AT 60 Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG.4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (mA) SR502-SR504 SR505-SR510 SR502-SR504 INSTANTANEOUS FORWARD CURRENT, SR505-SR510 1.0 10 TJ =125° C (A) 1.0 0.1 PULSE WIDTH=300μ s DUTY CYCLE1% T J =25° C TJ=75° C 0.1 0.01 TJ =25° C 0.01 0 0.2 0.4 0.6 0.8 1.0 1 .2 1.4 0.001 0 20 40 60 80 100 120 140 INSTANTANEOUS FORWARD VOLTAGE,(V) PERCENT OF RATED PEAK FIG.5-TYPICAL JUNCTION CAPACITANCE 10000 T J =25° C f=1MHz Vsig=50mV REVERSE VOLTAGE,(%) JUNCTION CAPACITANCE,(pF) 1000 SR502-SR504 SR505-SR510 100 0.1 1.0 10 100 REVERSE VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com