SRB1050

SCHTTKY BARRIER RECTIFIER SRB1020 THRU SRB10100 FEATURES • VOLTAGE RANGE CURRENT 20 to 100 Volts 10.0 Ampere • • • • • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound Exceeds environmental standards of MIL-S-19500/228 Low power loss, high efficiency Low forward voltage, high current capability High surge capacity For use in low voltage, high frequency inverters Free wheeling, and polarity protection applications MECHANICAL DATA • • • • • Case: TO-263( D2 –PAK)plastic Terminals: Lead solderable per MIL-STD-202, Method 208 Polarity: as marked Mounting position: Any Weight: 0.06ounce, 1.7 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SRB SRB SRB S YMBOLS 1020 1030 1035 Maximum Repetitive Peak Reverse Voltage 20 30 35 VRRM Maximum RMS Voltage VRMS 14 21 25 Maximum DC Blocking Voltage VDC 20 30 35 • • • Maximum Average Forward Rectified Current At Tc=100℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Maximum Forward Voltage per at 10.0A per element Maximum DC Reverse Current at rated DC Blocking Voltage per element Typical Junction Capacitance(Note2) Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range T C = 25℃ TC = 100℃ SRB 1040 40 28 40 SRB 1045 45 32 45 10.0 150 SRB 1050 50 35 50 SRB 1060 60 42 60 SRB 1080 80 56 80 SRB 10100 100 70 100 UNIT Volts Volts Volts Amps Amps I(AV) IFSM VF IR CJ RθJC TJ TSTG 0.65 0.75 0.5 50 500 3.0 (-55 to +150) 0.85 Volts mA pF ℃/W ℃ Notes: 1. Thermal Resistance Junction to CASE 2. Measured at VR=4v and f=1MHz E-mail: sales@cnmic.com Web Site: www.cnmic.com SCHTTKY BARRIER RECTIFIER SRB1020 THRU SRB10100 VOLTAGE RANGE CURRENT 20 to 200 Volts 10.0 Ampere RATING AND CHRACTERISTIC CURVES SRB1020 THRU SRB10100 FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 10 40 FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERSTIC 20,30,40V 20 10 8 6 4 8 INSTNTANCEOUS FORWARD CURRENT, A VERAGE FORWARD CURRENT, 80,100V AMPERES AMP ERES 6 2 1.0 0.8 0.6 0.4 0.2 0.1 0.4 50,60V 4 2 Tj =25 ℃ Pulse Width=200 μs 0 0 50 CASE TEMPERATRUE ( ℃) 100 150 0.5 0.6 0.7 0.8 0.9 1.0 1.1 INSTANTANEOUS FORWART VOLTAGE,VOLTS FIG.4-MAXIMUM NON-REPETITIVE SURGE CURRENT 150 FIG.2-TYPICAL REVERSE CHARACTERISTICS 100 130 8.3ms Single Half Sine-Wave JEDEC Method 110 CURRE NT,AMP ERES TC=100℃ P EAK FORWARD SURGE 90 70 INSTANTANEOUS REVERSE CURRENT, MILIAMPERES 50 10 30 20 TC=75 ℃ 0 1 1.0 2 5 10 20 50 100 NUMBER OF CYCLES AT 60 Hz FIG.5-TYPICAL JUNCTION CAPACITANCE TC=25℃ 400 CAPACITANCE,pF 0.1 350 300 250 TJ =25 ℃ 200 0.01 0 100 120 200 300 150 REVERSE VOLTAGE VOLTS 1 2 5 10 20 50 100 200 500 REVERSE VOLTAGE,VOLTS E-mail: sales@cnmic.com Web Site: www.cnmic.com