SRB1680

SCHTTKY BARRIER RECTIFIER SRB1620 THRU SRB16100 FEATURES • VOLTAGE RANGE CURRENT 20 to 100 Volts 16.0 Ampere • • • • • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound Exceeds environmental standards of MILS-19500/228 Low power loss, high efficiency Low forward voltage, high current capability High surge capacity For use in low voltage, high frequency inverters Free wheeling, and polarity protection applications MECHANICAL DATA • • • • • Case: TO-263AB( D2–PAK)Molded Plastic Terminals: Lead solderable per MIL-STD-202, Method 208 Polarity: as marked Mounting position: Any Weight: 0.08ounce, 2.24 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SRB SRB SRB S YMBOLS 1620 1630 1635 Maximum Repetitive Peak Reverse Voltage VRRM 20 30 35 Maximum RMS Voltage 14 21 25 VRMS Maximum DC Blocking Voltage VDC 20 30 35 • • • Maximum Average Forward Rectified Current At Tc=90℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Maximum Forward Voltage per at 16.0A per element Maximum DC Reverse Current at rated DC Blocking Voltage per element Typical Junction Capacitance(Note2) Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range T C = 25℃ TC = 100℃ SRB 1640 40 28 40 SRB 1645 45 32 45 10.0 150 SRB 1650 50 35 50 SRB 1660 60 42 60 SRB 1680 80 56 80 SRB 16100 100 70 100 UNIT Volts Volts Volts Amps Amps I(AV) IFSM VF IR CJ RθJC TJ TSTG 0.65 0.75 0.5 50 500 3.0 (-55 to +150) 0.85 Volts mA pF ℃/W ℃ Notes: 1. Thermal Resistance Junction to CASE 2. Measured at VR=4v and f=1MHz E-mail: sales@cnmic.com Web Site: www.cnmic.com SCHTTKY BARRIER RECTIFIER SRB1620 THRU SRB16100 VOLTAGE RANGE CURRENT 20 to100 Volts 16.0 Ampere RATING AND CHRACTERISTIC CURVES SRB1620 THRU SRB16100 FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 20 40 FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERSTIC 20,30,40V 20 10 8 6 4 16 I NSTNTANCEO US FO RWARD CU RRENT, AVERAG E FOR WARD CUR RENT, 80,100V A M P E RE S AMPER ES 12 2 1.0 0.8 0.6 0.4 0.2 0.1 0.4 50,60V 8.0 4.0 Tj =25℃ Pulse Width=200 μ s 0 0 50 CASE TEMPERATRUE (℃ ) 100 150 0.5 0.6 0.7 0.8 0.9 1.0 1.1 INSTANTANEOUS FORWART VOLTAGE,VOLTS FIG.4-MAXIMUM NON-REPETITIVE SURGE CURRENT 150 FIG.2-TYPICAL REVERSE CHARACTERISTICS 100 130 8.3ms Single Half Sine-Wave JEDEC Method 110 CU RREN T, AMPERES TC=100 ℃ PEAK FOR WARD SURG E 90 70 INSTANTANEO US R EVERSE CURRENT, M IL IAM PERES 50 10 30 20 TC=75 ℃ 0 1 1.0 2 5 10 20 50 100 NUMBER OF CYCLES AT 60 Hz FIG.5-TYPICAL JUNCTION CAPACITANCE TC=25 ℃ 400 CAPAC ITANCE,pF 0.1 350 300 250 TJ =25℃ 200 0.01 0 100 120 200 300 150 REVERSE VOLTAGE VOLTS 1 2 5 10 20 50 100 200 500 REVERSE VOLTAGE,VOLTS E-mail: sales@cnmic.com Web Site: www.cnmic.com