SRF10150

SCHTTKY BARRIER RECTIFIER SRF1020 THRU SRF10100 FEATURES • VOLTAGE RANGE CURRENT 20 to 100 Volts 10.0 Amperes • • • • • Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound Exceeds environmental standards of MIL-S-19500/228 Low power loss, high efficiency Low forward voltage, high current capability High surge capacity For use in low voltage, high frequency inverters Free wheeling, and polarity protection applications ITO-220AC MECHANICAL DATA • • • • • Case: ITO-220AC full molded plastic package Terminals: Lead solderable per MIL-STD-202, Method 208 Polarity: as marked Mounting Position: Any Weight: 0.08ounces, 2.24 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% RF SYMBOLS S020 1 SRF 1030 SRF 1035 SRF 1040 SRF 1045 SRF 1050 SRF 1060 SRF 1080 SRF 10100 SRF 10150 SRF 10200 UNIT Volts Volts Volts Amps Amps Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current At Tc=100℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 10.0A per element Maximum DC Reverse Current at TC = 25℃ rated DC Blocking Voltage per TC = 100℃ element Typical Junction Capacitance(Note2) Typical Thermal Resistance (Note 1) Operating Storage Temperature Range VRRM VRMS VDC I(AV) IFSM VF IR CJ RθJC TJ TSTG 20 14 20 30 21 30 35 25 35 40 28 40 45 32 45 50 35 50 10.0 150 60 42 60 80 56 80 100 70 100 150 105 150 200 140 200 0.65 0.75 0.5 50 500 4.0 (-55 to +150) 0.85 Volts mA pF ℃/W ℃ Notes: 1. Thermal Resistance Junction to CASE 2. Measured at VR=4v and f=1MHz E-mail: sales@cnmic.com Web Site: www.cnmic.com SCHTTKY BARRIER RECTIFIER SRF1020 THRU SRF10100 VOLTAGE RANGE CURRENT 20 to 100 Volts 10.0 Ampere RATING AND CHRACTERISTIC CURVES SRF1020 THRU SRF10100 FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 10 40 FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERSTIC 20,30,40V 20 10 8 6 4 8 INSTNTANCEOUS FORWARD CURRENT, AVERAGE FORWARD CURRENT, 80,100V AMPERES AMPERES 6 2 1.0 0.8 0.6 0.4 0.2 0.1 0.4 50,60V 4 2 Tj =25 ℃ Pulse Width=200 μ s 0 0 50 CASE TEMPERATRUE (℃ ) 100 150 0.5 0.6 0.7 0.8 0.9 1.0 1.1 INSTANTANEOUS FORWART VOLTAGE,VOLTS FIG.4-MAXIMUM NON-REPETITIVE SURGE CURRENT 150 FIG.2-TYPICAL REVERSE CHARACTERISTICS 100 130 8.3ms Single Half Sine-Wave JEDEC Method 110 PEAK FORWARD SURGE TC=100 ℃ CURRENT,AMPERES 90 70 INSTANTANEOUS REVERSE CURRENT, MILIAMPERES 50 10 30 20 TC=75 ℃ 0 1 1.0 2 5 10 20 50 100 NUMBER OF CYCLES AT 60 Hz FIG.5-TYPICAL JUNCTION CAPACITANCE TC=25 ℃ 400 CAPACITANCE,pF 0.1 350 300 250 TJ =25 ℃ 200 0.01 0 100 120 200 300 150 REVERSE VOLTAGE VOLTS 1 2 5 10 20 50 100 200 500 REVERSE VOLTAGE,VOLTS E-mail: sales@cnmic.com Web Site: www.cnmic.com