SRFL1035

LOW FORWARD VOLTAGE SCHOTTKY BARRIER RECTIFIER SRFL1030 THRU SRFL1060 FEATURES • • • • • • • VOLTAGE RANGE CURRENT 30 t o 60 Volts 10.0 Ampere Schottky Barrier Chip Guard Ring Die Construction for Transient Protechion Low Power Loss, High efficiency High Surge Capability High Current capacity and Low Forward Voltage Drop For use in low voltage high frequency inverters, Free wheeling, and polarity protection applications Plastic Material has UL Flammability Classification 94V-0 ITO-220AB MECHANICAL DATA • • • • • • Dimensions in inches and (millimeters) Case: ITO-220AC molded plastic Terminals: Plated Lead solderable per MIL-STD-202 Method 208 Polarity: See Diagram Weight:2.24 grams (approx) Mounting Position: Any Marking: Type Number MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SRFL SYMBOLS 1030 Peak Repetitive Reverse Voltage VRRM Working Peak Reverse Voltage 30 VRWM DC Blocking Voltage VR RMS Reverse Voltage VR(RMS) 21 Average Rectified Output Curent (Note 1)@Tc=95℃ Non-Repetitive Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Forward Voltage Drop @IF =10A,TC=25℃ Peak Reverse Current at Rated DC Blocking Voltage T C = 25℃ TC = 100℃ SRFL 1035 35 25 SRFL 1040 40 28 SRFL 1045 45 32 10.0 250 SRFL 1050 50 35 SRFL 1060 60 42 UNIT V V A A IO IFSM VFM IRM Cj RθJC TJ TSTG 0.55 0.65 V mA pF ℃/W ℃ Typical Junction Capacitance(Note2) Typical Resistance Junction to case(Note1) Operating and Storage Temperature Range 1.0 50 700 3.5 (-55 to +150) Notes: 1. Thermal Resistance Junction to case mounted on heatsink 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC E-mail: sales@cnmic.com Web Site: www.cnmic.com LOW FORWARD VOLTAGE SCHOTTKY BARRIER RECTIFIER SRFL1030 THRU SRFL1060 VOLTAGE RANGE CURRENT 30 to 60 Volts 10.0 Ampere RATINGE AND CHARACTERISTIC CURVES SRFL1030 THRU SRFL1060 20 16 12 8 4 0 FIG.1-FORWARD CURRENT DERATING CURVE INS TANTANE OUS FORWARD CURRENT, ( A) FIG.2-TYPICAL FORWARD CHARACTERISTICS ) ,AV ERAG E FORWARD CURRENT, ( A) 100 SRFL1030-SRFL1045 10 1.0 SRFL1050-SRFL1060 Tj =25℃ I( 0 TC ,CASE TMPERSTRUE( ℃ ) 50 100 150 0.1 0.2 Pulse Width=300μ s 2% duty cycle AV VF,INSTANTANEOUS FORWARD VOLTAGE( V ) FIG4 TYPICAL JUNCTION CAPACITANCE PER ELEMENT Tj =25 ℃ 0.4 0.6 0.8 IFSM ,P EAK FORWARD SURGE CURRENT, ( A) 300 250 200 150 100 50 0 FIG.3 MAX NON-REPETITIVE SURGE CURRENT 8.3ms Single Half Sine-Wave JEDEC Method 4000 C j ,CAP ACITANCE ( pF) 1000 1 NUMBER OF CYCLES AT 60 Hz 10 100 FIG.5-TYPICAL REVERSE CHARACTERISTICS 100 0.1 VR,REVERSE VOLTAGE( v) 1.0 10 100 100 IR, INSTANTA NO US REVE RS E CURRENT,( m A ) 10 Tj =100℃ Tj =75 ℃ 1.0 T j =25℃ 0.1 0.01 0 PERCENT OF RATED REVERSE VOLTAGE,( % ) 40 80 120 E-mail: sales@cnmic.com Web Site: www.cnmic.com