SRL1660

LOW FORWARD VOLTAGE SCHOTTKY BARRIER RECTIFIER SRL1630 THRU SRL1660 FEATURES • • • • • • • VOLTAGE RANGE CURRENT 30 t o 60 Volts 16.0 Ampere Schottky Barrier Chip Guard Ring Die Construction for Transient Protechion Low Power Loss, High efficiency High Surge Capability High Current capacity and Low Forward Voltage Drop For use in low voltage high frequency inverters, Free wheeling, and polarity protection applications Plastic Material has UL Flammability Classification 94V-0 TO-220AC MECHANICAL DATA • • • • • • Dimensions in inches and (millimeters) Case: D2-PAK molded plastic Terminals: Plated Lead solderable per MIL-STD-202 Method 208 Polarity: See Diagram Weight: 2.24 grams (approx) Mounting Position: Any Marking: Type Number MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SRL SYMBOLS 1630 Peak Repetitive Reverse Voltage VRRM Working Peak Reverse Voltage 30 VRWM DC Blocking Voltage VR RMS Reverse Voltage VR(RMS) 21 Average Rectified Output Curent (Note 1)@Tc=95℃ Non-Repetitive Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Forward Voltage Drop @IF =16A,TC=25℃ Peak Reverse Current at Rated DC Blocking Voltage T C = 25℃ TC = 100℃ SRL 1635 35 25 SRL 1640 40 28 10.0 250 0.55 SRL 1645 45 32 SRL 1650 50 35 SRL 1660 60 42 UNIT V V A A IO IFSM VFM IRM Cj RθJC TJ TSTG 0.65 V mA pF ℃/W ℃ Typical Junction Capacitance(Note2) Typical Resistance Junction to case(Note1) Operating and Storage Temperature Range 1.0 50 700 3.5 (-55 to +150) Notes: 1. Thermal Resistance Junction to case mounted on heatsink 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC E-mail: sales@cnmic.com Web Site: www.cnmic.com LOW FORWARD VOLTAGE SCHOTTKY BARRIER RECTIFIER SRL1630 THRU SRL1660 VOLTAGE RANGE CURRENT 30 to 60 Volts 16.0 Ampere RATINGE AND CHARACTERISTIC CURVES SRL1630 THRU SRL1660 20 16 12 8 4 0 FIG.1-FORWARD CURRENT DERATING CURVE INST ANT ANEOUS F ORWARD CURRENT, ( A) FIG.2-TYPICAL FORWARD CHARACTERISTICS ) ,AVERAGE FO RWARD CURRENT, ( A) 100 SRL1630-SRL1645 10 1.0 SRL1650-SRL1660 Tj =25℃ 0 TC ,CASE TMPERSTRUE( ℃ ) 50 100 150 0.1 0.1 Pulse Width=300μ s 2% duty cycle I( AV VF,INSTANTANEOUS FORWARD VOLTAGE( V ) FIG4 TYPICAL JUNCTION CAPACITANCE PER ELEMENT Tj =25℃ 0.3 0.5 0.7 0.9 IFSM ,PEAK F ORWARD SURGE CURRENT, ( A) 300 250 200 150 100 50 0 FIG.3 MAX NON-REPETITIVE SURGE CURRENT 8.3ms Single Half Sine-Wave JEDEC Method 4000 C j ,CAPACIT ANCE( pF) 1000 1 NUMBER OF CYCLES AT 60 Hz 10 100 FIG.5-TYPICAL REVERSE CHARACTERISTICS 100 0.1 VR,REVERSE VOLTAGE( v) 1.0 10 100 100 IR, INST ANTANOUS REVERSE CURRENT ,( mA ) 10 Tj =100℃ Tj =75℃ 1.0 0.1 Tj =25℃ 0.01 0 PERCENT OF RATED REVERSE VOLTAGE,( % ) 40 80 120 E-mail: sales@cnmic.com Web Site: www.cnmic.com