SSL12

MASTER INSTRUMENT CORPORATION SURFACE MOUNT Low VF SCHOTTKY BARRIER RECTIFIER SSL12 THRU SSL14 FEATURES • • • • • • • • • • VOLTAGE RANGE Forward Current 20 to 40 Volts 1.0 Amperes Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Low profile package Built-in strain relied Metal to silicon rectifier majority carrier conduction Low power loss, High efficiency High current capability, low VF High surge capacity For use in low voltage high frequency inverters, free wheeling, and polarity protection applications High temperature soldering guaranteed: 260 OC/10 seconds at terminals SMA(DO-214AC) MECHANICAL DATA • • • • Case: JEDEC DO-214AC molded plastic Terminals: Solder plated, solderable per MIL-STD-750 method 2026 Polarity: Color band denotes cathode Weight: 0.002ounce, 0.064 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25OC ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At TL see figure 1 Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 1.0A (Note 1) Maximum DC Reverse Current at Rated TA = 25 ℃(Note 1) DC Blocking Voltage per element Typical Thermal Resistance (Note 2) Operating Junction Temperature Storage Temperature Rang TA = 100℃ VRRM VRMS VDC I(AV) IFSM VF IR RθJA RθJL TJ TSTG SSL12 20 14 20 SSL13 30 21 30 1.0 30.0 0.38 0.5 20.0 88 28 -50 to+125 -50 to +150 SSL14 40 28 40 UNIT Volts Volts Volts Amps Amps 0.45 Volts mA ℃/W ℃ ℃ Notes: 1. 2. Pulse test: 300µS pulse width, 1% duty cycle Mounted on P.C. Board with 8.0mm2 (.013cm thick) copper pad areas E-mail: sales@cnmic.com Web Site: www.cnmic.com MASTER INSTRUMENT CORPORATION SURFACE MOUNT Low VF SCHOTTKY BARRIER RECTIFIER SSL12 THRU SSL14 VOLTAGE RANGE Forward Current 20 to 40 Volts 1.0 Amperes E-mail: sales@cnmic.com Web Site: www.cnmic.com MASTER INSTRUMENT CORPORATION SURFACE MOUNT Low VF SCHOTTKY BARRIER RECTIFIER SSL12 THRU SSL14 FEATURES • • • • • • • • • • VOLTAGE RANGE Forward Current 20 to 40 Volts 1.0 Amperes Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Low profile package Built-in strain relied Metal to silicon rectifier majority carrier conduction Low power loss, High efficiency High current capability, low VF High surge capacity For use in low voltage high frequency inverters, free wheeling, and polarity protection applications High temperature soldering guaranteed: 260 OC/10 seconds at terminals SMA(DO-214AC) MECHANICAL DATA • • • • Case: JEDEC DO-214AC molded plastic Terminals: Solder plated, solderable per MIL-STD-750 method 2026 Polarity: Color band denotes cathode Weight: 0.002ounce, 0.064 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25OC ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At TL see figure 1 Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 1.0A (Note 1) Maximum DC Reverse Current at Rated TA = 25 ℃(Note 1) DC Blocking Voltage per element Typical Thermal Resistance (Note 2) Operating Junction Temperature Storage Temperature Rang TA = 100℃ VRRM VRMS VDC I(AV) IFSM VF IR RθJA RθJL TJ TSTG SSL12 20 14 20 SSL13 30 21 30 1.0 30.0 0.38 0.5 20.0 88 28 -50 to+125 -50 to +150 SSL14 40 28 40 UNIT Volts Volts Volts Amps Amps 0.45 Volts mA ℃/W ℃ ℃ Notes: 1. 2. Pulse test: 300µS pulse width, 1% duty cycle Mounted on P.C. Board with 8.0mm2 (.013cm thick) copper pad areas E-mail: sales@cnmic.com Web Site: www.cnmic.com MASTER INSTRUMENT CORPORATION SURFACE MOUNT Low VF SCHOTTKY BARRIER RECTIFIER SSL12 THRU SSL14 VOLTAGE RANGE Forward Current 20 to 40 Volts 1.0 Amperes E-mail: sales@cnmic.com Web Site: www.cnmic.com MASTER INSTRUMENT CORPORATION SURFACE MOUNT Low VF SCHOTTKY BARRIER RECTIFIER SSL12 THRU SSL14 FEATURES • • • • • • • • • • VOLTAGE RANGE Forward Current 20 to 40 Volts 1.0 Amperes Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Low profile package Built-in strain relied Metal to silicon rectifier majority carrier conduction Low power loss, High efficiency High current capability, low VF High surge capacity For use in low voltage high frequency inverters, free wheeling, and polarity protection applications High temperature soldering guaranteed: 260 OC/10 seconds at terminals SMA(DO-214AC) MECHANICAL DATA • • • • Case: JEDEC DO-214AC molded plastic Terminals: Solder plated, solderable per MIL-STD-750 method 2026 Polarity: Color band denotes cathode Weight: 0.002ounce, 0.064 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25OC ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At TL see figure 1 Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 1.0A (Note 1) Maximum DC Reverse Current at Rated TA = 25 ℃(Note 1) DC Blocking Voltage per element Typical Thermal Resistance (Note 2) Operating Junction Temperature Storage Temperature Rang TA = 100℃ VRRM VRMS VDC I(AV) IFSM VF IR RθJA RθJL TJ TSTG SSL12 20 14 20 SSL13 30 21 30 1.0 30.0 0.38 0.5 20.0 88 28 -50 to+125 -50 to +150 SSL14 40 28 40 UNIT Volts Volts Volts Amps Amps 0.45 Volts mA ℃/W ℃ ℃ Notes: 1. 2. Pulse test: 300µS pulse width, 1% duty cycle Mounted on P.C. Board with 8.0mm2 (.013cm thick) copper pad areas E-mail: sales@cnmic.com Web Site: www.cnmic.com MASTER INSTRUMENT CORPORATION SURFACE MOUNT Low VF SCHOTTKY BARRIER RECTIFIER SSL12 THRU SSL14 VOLTAGE RANGE Forward Current 20 to 40 Volts 1.0 Amperes E-mail: sales@cnmic.com Web Site: www.cnmic.com MASTER INSTRUMENT CORPORATION SURFACE MOUNT Low VF SCHOTTKY BARRIER RECTIFIER SSL12 THRU SSL14 FEATURES • • • • • • • • • • VOLTAGE RANGE Forward Current 20 to 40 Volts 1.0 Amperes Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Low profile package Built-in strain relied Metal to silicon rectifier majority carrier conduction Low power loss, High efficiency High current capability, low VF High surge capacity For use in low voltage high frequency inverters, free wheeling, and polarity protection applications High temperature soldering guaranteed: 260 OC/10 seconds at terminals SMA(DO-214AC) MECHANICAL DATA • • • • Case: JEDEC DO-214AC molded plastic Terminals: Solder plated, solderable per MIL-STD-750 method 2026 Polarity: Color band denotes cathode Weight: 0.002ounce, 0.064 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25OC ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At TL see figure 1 Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 1.0A (Note 1) Maximum DC Reverse Current at Rated TA = 25 ℃(Note 1) DC Blocking Voltage per element Typical Thermal Resistance (Note 2) Operating Junction Temperature Storage Temperature Rang TA = 100℃ VRRM VRMS VDC I(AV) IFSM VF IR RθJA RθJL TJ TSTG SSL12 20 14 20 SSL13 30 21 30 1.0 30.0 0.38 0.5 20.0 88 28 -50 to+125 -50 to +150 SSL14 40 28 40 UNIT Volts Volts Volts Amps Amps 0.45 Volts mA ℃/W ℃ ℃ Notes: 1. 2. Pulse test: 300µS pulse width, 1% duty cycle Mounted on P.C. Board with 8.0mm2 (.013cm thick) copper pad areas E-mail: sales@cnmic.com Web Site: www.cnmic.com MASTER INSTRUMENT CORPORATION SURFACE MOUNT Low VF SCHOTTKY BARRIER RECTIFIER SSL12 THRU SSL14 VOLTAGE RANGE Forward Current 20 to 40 Volts 1.0 Amperes E-mail: sales@cnmic.com Web Site: www.cnmic.com