TR354

TIN CAN AUTOMOTIVE RECTIFIER TR351 THRU TR354 TECHNICAL SPECIFICATION： FEATURES • • • • • 26.00± 0.5 VOLTAGE RANGE CURRENT 100 to 400 Volts 35.0 Amperes TR ? 1.5± 0.1 Low Leakage Low forward voltage drop High current capability High forward surge current capacity Glass passivated chip 6.8± 0.2 ? 7.6± 0.05 ? 8.67± 0.2 ? 10.60± 0.3 MECHANICAL DATA • • • • • • Epoxy Technology: vacuum soldered Case: Tin Can Polarity: the glass is bule (Positive) the glass is white (Negative) Lead: Plated Ni lead, solderable per MIL-STD-202E method 208C Mounting: at will Weight: 0.09 ounces, 2.57 grams Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60HZ, resistive or inductive load For capacitive load derate current by 20% SYMBOLS TR351 100 70 100 TR352 200 140 200 35 TR353 300 210 300 TR354 400 280 400 UNIT Volts Volts Volts Amps Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At Tc=105℃ Peak Forward Surge Current 3.3mS single half sine wave superimposed on Rated load (JEDEC method) Rating for fusing (t＜8.3ms) Maximum instantaneous Forward Voltage at 100A Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage Typical Thermal Resistance Operating and Storage Temperature Range TA=100℃ VRRM VRMS VDC IO IFSM I2t VF IR RθJC TJ,TSTG 500 1038 1.08 5.0 250 1.0 (-65 to +175) Amps A2S Volts UA ℃/W ℃ Notes: 1. Enough heatsink must be considered in application. E-mail: sales@cnmic.com Web Site: www.cnmic.com TIN CAN AUTOMOTIVE RECTIFIER TR351 THRU TR354 VOLTAGE RANGE CURRENT 100 to 400 Volts 35.0 Amperes RATINGS AND CHARACTERISTIC CURVES TR351 THRU TR354 F1G.1 TYPICAL FORWARD CURRENT DERATING GURVE AVERAGE FORWARD CURRENT, (A) F1G.2 MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) 600 8.3ms Single Half Sine-Wave 500 400 300 200 100 1 Cycle (JEDEC Method) Tj=Tj max 40 30 20 10 0 0 25 50 75 100 125 150 175 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length AMBIENT TEMPERATURE, (℃) 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60 Hz F1G.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 F1G.4 FORWARD ROWER DISSIPATION AVERAGE POWER DISSIPATION (W) 60 INSTANTANEOUS FORWARD CURRENT, (A) 100 40 SQUARE WAVE DC 20 10 T1=25℃ PULSE WIDTH=300μ S 1%DUTY CYCLE 1.0 0 0 10 20 30 40 50 AVERAGE FORWARD CURRENT, (A) 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE,(V) E-mail: sales@cnmic.com Web Site: www.cnmic.com