W06G

GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER W005G THRU W10G FEATURES • • • • • • • VOLTAGE RANGE CURRENT 50 to 1000 Volts 1.5 Amperes Plastic package has underwriters laboratory Flammability classification 94V-0 Glass passivated ship junction High case dielectric strength High surge current capability Ideal for printed circuit boards High temperature soldering guaranteed 260℃/10 seconds, 0.375” (9.5mm) lead length at 5 lbs (2.3kg) tension MECHANICAL DATA • • • • Case: Epoxy, Molded Plastic body over passivated Junction Terminal: Plated leads solderable per MIL-STD-750 method 2026 Mounting position: Any Weight: 0.04 ounce, 1.1 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified SYMBOLS W005G W01G Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 • Maximum Average Forward Rectified Output, Current at TA=25℃ (Note 1) Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Rating for Fusing (t＜8.3ms) Maximum Instantaneous Forward Voltage Drop Per element at 1.0A DC Maximum Average Reverse Current at rated DC Blocking Voltage T A = 25℃ TA = 125℃ W02G 200 140 200 W04G 400 280 400 1.0 40 10 1.0 W06G 600 420 600 W08G 800 560 800 W10G 1000 700 1000 UNIT Volts Volts Volts Amps Amps A2S Volts µA µA pF ℃/W ℃ I(AV) IFSM I2 t VF IR CJ RθJL RθJA TJ TSTG Typical Junction Capacitance per leg at 4.0V, 1MHz Typical Thermal Resistance (NOTE 1) Operating Temperature Range Storage Temperature Range 5.0 500.0 14 14 36 (-55 to +150) (-55 to +150) Notes: 1. Thermal resistance from junction to lead at 0.375”(9.5mm) lead length P.C.B. mounting. E-mail: sales@cnmic.com Web Site: www.cnmic.com GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER W005G THRU W10G VOLTAGE RANGE CURRENT 50 to 1000 Volts 1.5 Amperes RATINGS AND CHARACTERISTICS CURVES W005G THRU W10G 1.6 PEAK FORWARD SURGE CURRENT, AMPERES FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT AVERAGE FORWARD OUTPUT CURRENT,AMPERES 1.4 1.2 1.0 0.8 0.6 CAPACITIVE LOADS Ipk/I(AV)=5.0 0.4 Ipk /I(AV)=10 Ipk /I(AV)=20 0.2 0 20 40 60 80 100 120 140 150 0.22×0.22" (5.5×5.5mm) COPPER PADS FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG 35 30 TA=25℃ SINGLE SINE-WAVE (JEDEC Method) 60 Hz RESISTIVE OR INDUCTIVE LOAD P.C.B. 0.375" ( 9.5mm) 20 10 0 1.0 CYCLE 1 10 100 NUMBER OF CYCLES AT 60 Hz AMBIENT TEMPERATURE,℃ FIG. 3 -TYPICAL FORWARD CHARACTERISTICS PER LEG 20 10 FIG.4 - TYPICAL REVERSE CHARACTERISTICS PER LEG 50 INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ =25℃ PULSE WIDTH=300 μs 1% DUTY CYCLE 10 TJ =100℃ 1 1 0.1 0.1 T J =25℃ 0.01 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 -TYPICAL JUNCTION CAPACITANCE PER LEG 100 FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, ℃/W 100 JUNCTION CAPACITANCE, pF TJ =25℃ f=1.0 MHz Vsig=50mVp-p 10 10 1 1 0.1 1 10 100 0.1 0.01 0.1 1 10 100 REVERSE VOLTAGE,VOLTS t, HEATING TIME, sec. E-mail: sales@cnmic.com Web Site: www.cnmic.com