H66T32AA

HI-SINCERITY MICROELECTRONICS CORP. Spec. No. : HA200220 Issued Date : 1998.04.08 Revised Date : 2002.12.20 Page No. : 1/4 H66T19/32/68 Series Description The H66T19/32/68 series is a CMOS LSI designed for use in door bell, telephone and toy applications. It is an on-chip ROM program-med for music performance. Produced by COMS technology, the device results in very low power consumption. Since the H66T19/32-/68 series includes oscillation circuits, a compact melody module can be constructed with only a few additional components. TO-92 Feature • 64-Note ROM memory • 1.5V to 3V power supply and low power consumption • Dynamic speaker can be driven with external NPN transistor • OSC resistor is built-in • Built-in level hold mode • Power on reset: melody begins from the first note Absolute Maximum Ratings • DC Supply Voltage ............................................................................................................ 1.5 V to +3 V • Operating Ambient Temperature..................................................................................... -10 °C to 60 °C • Storage Temperature.................................................................................................... -55 °C to 125 °C Pin Configuration Pin No. 1 2 3 Symbol Ground Vin Vout Description Negative Power Supply Positive Power Supply Melody Output Song Titles Part No. H66T19AA H66T19BA H66T32AA H66T32BA H66T68AA H66T68BA Title For Alice (Play time between 21s to 26s at Vcc=1.5V) For Alice (Play time between 18.5s to 22.5s at Vcc=1.5V) Coo Coo Waltz (Play time between 16.5s to 20s at Vcc=1.5V) Coo Coo Waltz (Play time between 15s to 18.5s at Vcc=1.5V) It's A Small World (Play time between 30s to 36s at Vcc=1.5V) It's A Small World (Play time between 28s to 34s at Vcc=1.5V) Note: During time bases on circuit in fig-2 in page 3. H66T19XA, H66T32XA, H66T68XA HSMC Product Specification HI-SINCERITY MICROELECTRONICS CORP. Comment Spec. No. : HA200220 Issued Date : 1998.04.08 Revised Date : 2002.12.20 Page No. : 2/4 Stress above those listed as "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only. Functions of this device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Any expos-ure to absolute maximum rating conditions for extended periods may affect device reliability. Electrical Characteristics (VSS=0V, Ta=25°C, FOSC=65536Hz, unless otherwise specified) Paramater Operating Voltage Operating Current Drive Current O/P Sink Current Frequency Deviation Per Lot Frequency Stability Symbol VDD ID IDrive ISink ∆F/F ∆F/F Min 1.5V -12% 10% Typ Max 3V 20uA 200uA 5uA +33% Conditions VDD=1.5V, O/P Open VDD=1.3V, O/P=0.8V VDD=1.3V, O/P=0.5V Open VDD=1.5V (FOSC(1.6V)-FOSC (1.3V))/FOSC(1.3V) Functional Description • Oscillator Circuit The oscillation frequency is used for tone and beat generators. Its accuracy affects the quality of the music. • Tone Generator Tone frequencies are oscillator frequencies-M, where M is any even number from 64 to 256. Within a melody 14 scales can be selected including PAUSE code and END code. The tone generator is a programmed divider. The range of scales is from "C4" to "C6" and that for freq-uency varies from 258Hz to 23768Hz. • Rhythm Generator The rhythm generator is also a programmed divider. It contains 15 available rhythms as follows: 1/4 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 J. Four rhythms can be selected from these. • Melody Rom The Mask ROM can memorize 64 notes with 6 bits. 4 bits are used for controlling the scale co-de and 2 bits are used for controlling the rhythm code. • Tempo Generator There are 15 available tempos in the H66T19/32/68 Series. The 15 tempos are: 128, 137, 148, 160, 175, 192, 213, 240, 274, 320, 480, 640, 960, 1920 J / minute. H66T19XA, H66T32XA, H66T68XA HSMC Product Specification HI-SINCERITY MICROELECTRONICS CORP. Application Circuits Fig-1 H66T19/32/68 Series Vin Switch 1 2 3 Spec. No. : HA200220 Issued Date : 1998.04.08 Revised Date : 2002.12.20 Page No. : 3/4 Vout Buzzer 1.5V-3.0V Ground Fig-2 R1 1.5V-3.0V 220 ohm H66T19/32/68 Series Vin 2 1 3 Vout Buzzer Switch C1 1uF Ground Fig-3 Switch H66T19/32/68 Series Vin 2 Speaker 3 1.5V-3.0V C1 1uF 1 R1 Vout 4.7K Ground Q1 HE8050S Fig-4 R2 220 1.5V-3.0V C1 1uF 1 Speaker Vin 2 R1 3 Switch Vout 4.7K Q1 HE8050S Ground H66T19/32/68 Series H66T19XA, H66T32XA, H66T68XA HSMC Product Specification HI-SINCERITY MICROELECTRONICS CORP. TO-92 Dimension A B 1 2 3 Spec. No. : HA200220 Issued Date : 1998.04.08 Revised Date : 2002.12.20 Page No. : 4/4 α2 Marking: HSMC Logo Part Number Date Code Rank Product Series α3 Laser Mark HSMC Logo Product Series C D Part Number H I E F G Ink Mark α1 3-Lead TO-92 Plastic Package HSMC Package Code: A Style: Pin 1.Ground 2.Vin 3.Vout *: Typical DIM A B C D E F Inches Min. Max. 0.1704 0.1902 0.1704 0.1902 0.5000 0.0142 0.0220 *0.0500 0.1323 0.1480 Millimeters Min. Max. 4.33 4.83 4.33 4.83 12.70 0.36 0.56 *1.27 3.36 3.76 DIM G H I α1 α2 α3 Inches Min. Max. 0.0142 0.0220 *0.1000 *0.0500 *5° *2° *2° Millimeters Min. Max. 0.36 0.56 *2.54 *1.27 *5° *2° *2° Notes: 1.Dimension and tolerance based on our Spec. dated Apr. 25,1996. 2.Controlling dimension: millimeters. 3.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 4.If there is any question with packing specification or packing method, please contact your local HSMC sales office. Material: • Lead: 42 Alloy; solder plating • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC. • HSMC reserves the right to make changes to its products without notice. • HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: • Head Office (Hi-Sincerity Microelectronics Corp.): 10F.,No. 61, Sec. 2, Chung-Shan N. Rd. Taipei Taiwan R.O.C. Tel: 886-2-25212056 Fax: 886-2-25632712, 25368454 • Factory 1 : No. 38, Kuang Fu S. Rd., Fu-Kou Hsin-Chu Industrial Park Hsin-Chu Taiwan. R.O.C Tel: 886-3-5983621~5 Fax: 886-3-5982931 H66T19XA, H66T32XA, H66T68XA HSMC Product Specification