0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
JS28F128M29EWHF

JS28F128M29EWHF

  • 厂商:

    MICRON(镁光)

  • 封装:

    TFSOP56

  • 描述:

    IC FLASH 128MBIT PARALLEL 56TSOP

  • 数据手册
  • 价格&库存
JS28F128M29EWHF 数据手册
32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash Features Parallel NOR Flash Embedded Memory JR28F032M29EWXX; PZ28F032M29EWXX; JS28F064M29EWXX PC28F064M29EWXX; JR28F064M29EWXX; PZ28F064M29EWXX JS28F128M29EWXX; PC28F128M29EWXX; RC28F128M29EWXX Features • VPP/WP# pin protection – VPPH voltage on V PP to accelerate programming performance – Protects highest/lowest block (H/L uniform) or top/bottom two blocks (T/B boot) • Software protection – Volatile protection – Nonvolatile protection – Password protection – Password access • Extended memory block – 128-word (256-byte) block for permanent secure identification – Program or lock implemented at the factory or by the customer • Low-power consumption: Standby mode • JESD47H-compliant – 100,000 minimum ERASE cycles per block – Data retention: 20 years (TYP) • 65nm single-bit cell process technology • Packages (JEDEC-standard) – 56-pin TSOP (128Mb, 64Mb) – 48-pin TSOP (64Mb, 32Mb) – 64-ball FBGA (128Mb, 64Mb) – 48-ball BGA (64Mb, 32Mb) • Green packages available – RoHS-compliant – Halogen-free • Operating temperature – Ambient: –40°C to +85°C • Supply voltage – VCC = 2.7–3.6V (program, erase, read) – VCCQ = 1.65–3.6V (I/O buffers) • Asynchronous random or page read – Page size: 8 words or 16 bytes – Page access: 25ns – Random access (VCCQ = 2.7–3.6V): 60ns (BGA); 70ns (TSOP) • Buffer program: 256-word MAX program buffer • Program time – 0.56µs per byte (1.8 MB/s TYP when using 256word buffer size in buffer program without V PPH) – 0.31µs per byte (3.2 MB/s TYP when using 256word buffer size in buffer program with V PPH) • Memory organization – 32Mb: 64 main blocks, 64KB each, or eight 8KB boot blocks (top or bottom) and 63 main blocks, 64KB each – 64Mb: 128 main blocks, 64KB each, or eight 8KB boot blocks (top or bottom) and 127 main blocks, 64 KB each – 128Mb: 128 main blocks, 128KB each • Program/erase controller – Embedded byte/word program algorithms • Program/erase suspend and resume capability – READ operation on another block during a PROGRAM SUSPEND operation – READ or PROGRAM operation on one block during an ERASE SUSPEND operation on another block • BLANK CHECK operation to verify an erased block • Unlock bypass, block erase, chip erase, and write to buffer capability – Fast buffered/batch programming – Fast block and chip erase PDF: 09005aef84dc44a7 m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN 1 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2012 Micron Technology, Inc. All rights reserved. Products and specifications discussed herein are subject to change by Micron without notice. 32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash Features Part Numbering Information This product is available with the prelocked extended memory block. Devices are shipped from the factory with memory content bits erased to 1. For a list of available options, such as packages or high/low protection, or for further information, contact your Micron sales representative. Table 1: Part Number Information Part Number Category Package Category Details JS = 56-pin TSOP, 14mm x 20mm, lead-free, halogen-free, RoHS-compliant PC = 64-ball Fortified BGA, 11mm x 13mm, lead-free, halogen-free, RoHS-compliant RC = 64-ball Fortified BGA, 11mm x 13mm, leaded JR = 48-pin TSOP, 12mm x 20mm, lead-free, halogen-free, RoHS-compliant PZ = 48-ball BGA, 6mm x 8mm, lead-free, halogen-free, RoHS-compliant Product designator 28F = Parallel NOR interface Density 128 = 128Mb 064 = 64Mb 032 = 32Mb Device type M29EW = Embedded Flash memory (3V core, page read) Device function H = Highest block protected by VPP/WP#; uniform block L = Lowest block protected by VPP/WP#; uniform block B = Bottom boot; bottom two blocks protected by VPP/WP# T = Top boot; top two blocks protected by VPP/WP# Features A/B/F/X or an asterisk (*) = Combination of features, including packing media, security features, and specific customer request information Valid M29EW Part Number Combinations Table 2: Standard Part Numbers by Density, Medium, and Package Density Medium Package JS 32Mb Tray – PC RC – – JR PZ JR28F032M29EWHA PZ28F032M29EWHA JR28F032M29EWLA PZ28F032M29EWLA JR28F032M29EWBA PZ28F032M29EWBA JR28F032M29EWTA PZ28F032M29EWTA Tape and reel PDF: 09005aef84dc44a7 m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN – – – JR28F032M29EWBB PZ28F032M29EWBB JR28F032M29EWTB 2 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2012 Micron Technology, Inc. All rights reserved. 32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash Features Table 2: Standard Part Numbers by Density, Medium, and Package (Continued) Density Medium Package 64Mb JS PC RC Tray JS28F064M29EWHA PC28F064M29EWHA JS28F064M29EWLA – PZ JR28F064M29EWHA PZ28F064M29EWHA PC28F064M29EWLA JR28F064M29EWLA PZ28F064M29EWLA JS28F064M29EWBA PC28F064M29EWBA JR28F064M29EWBA PZ28F064M29EWBA JS28F064M29EWTA JR28F064M29EWTA PZ28F064M29EWTA PC28F064M29EWTA Tape JS28F064M29EWLB and reel 128Mb Tray JR – – JR28F064M29EWHB PZ28F064M29EWBB JR28F064M29EWLB JR28F064M29EWTB JS28F128M29EWHF PC28F128M29EWHF RC28F128M29EWHF JS28F128M29EWLA PC28F128M29EWLA RC28F128M29EWLA Tape and reel – – – – – – – Table 3: Part Numbers with Security Features by Density, Medium, and Package Package Density Medium PC PZ 64Mb Tray PC28F064M29EWHX PZ28F064M29EWHX PC28F064M29EWLX PZ28F064M29EWLX PC28F064M29EWBX PZ28F064M29EWBX PC28F064M29EWTX PZ28F064M29EWTX Tape and Reel PC28F064M29EWTY – Tray PC28F128M29EWHX – 128Mb PC28F128M29EWLX Tape and Reel Note: – – 1. This data sheet covers only standard parts. For security parts, contact your local Micron sales representative. PDF: 09005aef84dc44a7 m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN 3 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2012 Micron Technology, Inc. All rights reserved. 32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash Features Contents General Description ......................................................................................................................................... 8 Signal Assignments ........................................................................................................................................... 9 Signal Descriptions ......................................................................................................................................... 13 Memory Organization .................................................................................................................................... 14 Memory Configuration ............................................................................................................................... 14 Memory Map – 32Mb ................................................................................................................................. 15 Memory Map – 64Mb ................................................................................................................................. 17 Memory Map – 128Mb ................................................................................................................................ 19 Bus Operations ............................................................................................................................................... 20 Read .......................................................................................................................................................... 20 Write .......................................................................................................................................................... 20 Standby ..................................................................................................................................................... 20 Output Disable ........................................................................................................................................... 21 Reset .......................................................................................................................................................... 21 Registers ........................................................................................................................................................ 22 Status Register ............................................................................................................................................ 22 Lock Register .............................................................................................................................................. 27 Standard Command Definitions – Address-Data Cycles .................................................................................... 29 READ and AUTO SELECT Operations .............................................................................................................. 32 READ/RESET Command ............................................................................................................................ 32 READ CFI Command .................................................................................................................................. 32 AUTO SELECT Command ........................................................................................................................... 32 Bypass Operations .......................................................................................................................................... 34 UNLOCK BYPASS Command ...................................................................................................................... 34 UNLOCK BYPASS RESET Command ............................................................................................................ 35 Program Operations ....................................................................................................................................... 35 PROGRAM Command ................................................................................................................................ 35 UNLOCK BYPASS PROGRAM Command ..................................................................................................... 36 DOUBLE BYTE/WORD PROGRAM Command ............................................................................................. 36 QUADRUPLE BYTE/WORD PROGRAM Command ...................................................................................... 36 OCTUPLE BYTE PROGRAM Command ....................................................................................................... 37 WRITE TO BUFFER PROGRAM Command .................................................................................................. 37 UNLOCK BYPASS WRITE TO BUFFER PROGRAM Command ....................................................................... 39 ENHANCED WRITE TO BUFFER PROGRAM Command ............................................................................... 40 UNLOCK BYPASS ENHANCED WRITE TO BUFFER PROGRAM Command ................................................... 40 WRITE TO BUFFER PROGRAM CONFIRM Command .................................................................................. 41 ENHANCED WRITE TO BUFFER PROGRAM CONFIRM Command .............................................................. 41 BUFFERED PROGRAM ABORT AND RESET Command ................................................................................ 41 PROGRAM SUSPEND Command ................................................................................................................ 41 PROGRAM RESUME Command .................................................................................................................. 42 Erase Operations ............................................................................................................................................ 42 CHIP ERASE Command .............................................................................................................................. 42 UNLOCK BYPASS CHIP ERASE Command ................................................................................................... 42 BLOCK ERASE Command ........................................................................................................................... 43 UNLOCK BYPASS BLOCK ERASE Command ................................................................................................ 43 ERASE SUSPEND Command ....................................................................................................................... 44 ERASE RESUME Command ........................................................................................................................ 44 BLANK CHECK Operation .............................................................................................................................. 45 BLANK CHECK Commands ........................................................................................................................ 45 Block Protection Command Definitions – Address-Data Cycles ........................................................................ 46 PDF: 09005aef84dc44a7 m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN 4 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2012 Micron Technology, Inc. All rights reserved. 32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash Features Protection Operations .................................................................................................................................... LOCK REGISTER Commands ...................................................................................................................... PASSWORD PROTECTION Commands ....................................................................................................... NONVOLATILE PROTECTION Commands .................................................................................................. NONVOLATILE PROTECTION BIT LOCK BIT Commands ............................................................................ VOLATILE PROTECTION Commands .......................................................................................................... EXTENDED MEMORY BLOCK Commands .................................................................................................. EXIT PROTECTION Command .................................................................................................................... Device Protection ........................................................................................................................................... Hardware Protection .................................................................................................................................. Software Protection .................................................................................................................................... Volatile Protection Mode ............................................................................................................................. Nonvolatile Protection Mode ...................................................................................................................... Password Protection Mode .......................................................................................................................... Password Access ......................................................................................................................................... Common Flash Interface ................................................................................................................................ Power-Up and Reset Characteristics ................................................................................................................ Absolute Ratings and Operating Conditions ..................................................................................................... DC Characteristics .......................................................................................................................................... Read AC Characteristics .................................................................................................................................. Write AC Characteristics ................................................................................................................................. Accelerated Program, Data Polling/Toggle AC Characteristics ........................................................................... Electrical Specifications – Program/Erase Characteristics ................................................................................. Package Dimensions ....................................................................................................................................... Revision History ............................................................................................................................................. Rev. B – 11/12 ............................................................................................................................................. Rev. A – 08/12 ............................................................................................................................................. PDF: 09005aef84dc44a7 m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN 5 49 49 49 49 52 52 52 53 54 54 54 55 55 56 56 58 63 65 67 69 73 80 82 83 87 87 87 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2012 Micron Technology, Inc. All rights reserved. 32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash Features List of Figures Figure 1: Logic Diagram ................................................................................................................................... 8 Figure 2: 56-Pin TSOP (Top View) .................................................................................................................... 9 Figure 3: 48-Pin TSOP (Top View) .................................................................................................................. 10 Figure 4: 48-Ball BGA (Top and Bottom Views) ............................................................................................... 11 Figure 5: 64-Ball Fortified BGA (Top and Bottom Views) .................................................................................. 12 Figure 6: Data Polling Flowchart .................................................................................................................... 24 Figure 7: Toggle Bit Flowchart ........................................................................................................................ 25 Figure 8: Status Register Polling Flowchart ..................................................................................................... 26 Figure 9: Lock Register Program Flowchart ..................................................................................................... 28 Figure 10: Boundary Condition of Program Buffer Size .................................................................................... 38 Figure 11: WRITE TO BUFFER PROGRAM Flowchart ...................................................................................... 39 Figure 12: Program/Erase Nonvolatile Protection Bit Algorithm ...................................................................... 51 Figure 13: Software Protection Scheme .......................................................................................................... 56 Figure 14: Power-Up Timing .......................................................................................................................... 63 Figure 15: Reset AC Timing – No PROGRAM/ERASE Operation in Progress ...................................................... 64 Figure 16: Reset AC Timing During PROGRAM/ERASE Operation .................................................................... 64 Figure 17: AC Measurement Load Circuit ....................................................................................................... 66 Figure 18: AC Measurement I/O Waveform ..................................................................................................... 66 Figure 19: Random Read AC Timing (8-Bit Mode) ........................................................................................... 71 Figure 20: Random Read AC Timing (16-Bit Mode) ......................................................................................... 71 Figure 21: BYTE# Transition Read AC Timing .................................................................................................. 72 Figure 22: Page Read AC Timing (16-Bit Mode) ............................................................................................... 72 Figure 23: WE#-Controlled Program AC Timing (8-Bit Mode) .......................................................................... 74 Figure 24: WE#-Controlled Program AC Timing (16-Bit Mode) ......................................................................... 75 Figure 25: CE#-Controlled Program AC Timing (8-Bit Mode) ........................................................................... 77 Figure 26: CE#-Controlled Program AC Timing (16-Bit Mode) ......................................................................... 78 Figure 27: Chip/Block Erase AC Timing (8-Bit Mode) ...................................................................................... 79 Figure 28: Accelerated Program AC Timing ..................................................................................................... 80 Figure 29: Data Polling AC Timing .................................................................................................................. 80 Figure 30: Toggle/Alternative Toggle Bit Polling AC Timing (8-Bit Mode) .......................................................... 81 Figure 31: 56-Pin TSOP – 14mm x 20mm ........................................................................................................ 83 Figure 32: 48-Pin TSOP – 12mm x 20mm ........................................................................................................ 84 Figure 33: 48-Ball BGA – 6mm x 8mm ............................................................................................................. 85 Figure 34: 64-Ball Fortified BGA – 11mm x 13mm ........................................................................................... 86 PDF: 09005aef84dc44a7 m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN 6 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2012 Micron Technology, Inc. All rights reserved. 32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash Features List of Tables Table 1: Part Number Information ................................................................................................................... 2 Table 2: Standard Part Numbers by Density, Medium, and Package ................................................................... 2 Table 3: Part Numbers with Security Features by Density, Medium, and Package ................................................ 3 Table 4: Signal Descriptions ........................................................................................................................... 13 Table 5: 32Mb Memory Map – x8 Top and Bottom Boot [70:0] ......................................................................... 15 Table 6: 32Mb Memory Map – x16 Top and Bottom Boot [70:0] ........................................................................ 15 Table 7: 32Mb Memory Map – x8/x16 Uniform Blocks [63:0] ............................................................................ 16 Table 8: 64Mb Memory Map – x8 Top and Bottom Boot [134:0] ........................................................................ 17 Table 9: 64Mb Memory Map – x16 Top and Bottom Boot [134:0] ...................................................................... 17 Table 10: 64Mb Memory Map – x8/x16 Uniform Blocks [127:0] ........................................................................ 18 Table 11: 128Mb Memory Map – x8/x16 Uniform Blocks [127:0] ...................................................................... 19 Table 12: Bus Operations ............................................................................................................................... 20 Table 13: Status Register Bit Definitions ......................................................................................................... 22 Table 14: Operations and Corresponding Bit Settings ...................................................................................... 23 Table 15: Lock Register Bit Definitions ............................................................................................................ 27 Table 16: Standard Command Definitions – Address-Data Cycles, 8-Bit and 16-Bit ........................................... 29 Table 17: Read Electronic Signature ............................................................................................................... 33 Table 18: Block Protection ............................................................................................................................. 34 Table 19: Block Protection Command Definitions – Address-Data Cycles, 8-Bit and 16-Bit ................................ 46 Table 20: Extended Memory Block Address and Data ...................................................................................... 52 Table 21: V PP/WP# Functions ......................................................................................................................... 54 Table 22: Query Structure Overview ............................................................................................................... 58 Table 23: CFI Query Identification String ........................................................................................................ 58 Table 24: CFI Query System Interface Information .......................................................................................... 59 Table 25: Device Geometry Definition ............................................................................................................ 59 Table 26: Erase Block Region Information ....................................................................................................... 60 Table 27: Primary Algorithm-Specific Extended Query Table ........................................................................... 61 Table 28: Power-Up Specifications ................................................................................................................. 63 Table 29: Reset AC Specifications ................................................................................................................... 64 Table 30: Absolute Maximum/Minimum Ratings ............................................................................................ 65 Table 31: Operating Conditions ...................................................................................................................... 65 Table 32: Input/Output Capacitance .............................................................................................................. 66 Table 33: DC Current Characteristics .............................................................................................................. 67 Table 34: DC Voltage Characteristics .............................................................................................................. 68 Table 35: Read AC Characteristics .................................................................................................................. 69 Table 36: WE#-Controlled Write AC Characteristics ......................................................................................... 73 Table 37: CE#-Controlled Write AC Characteristics ......................................................................................... 76 Table 38: Accelerated Program and Data Polling/Data Toggle AC Characteristics .............................................. 80 Table 39: Program/Erase Characteristics ........................................................................................................ 82 PDF: 09005aef84dc44a7 m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN 7 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2012 Micron Technology, Inc. All rights reserved. 32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash General Description General Description The M29EW is an asynchronous, parallel NOR Flash memory device manufactured on 65nm single-bit cell (SBC) technology. READ, ERASE, and PROGRAM operations are performed using a single low-voltage supply. Upon power-up, the device defaults to read array mode. The main memory array is divided into uniform blocks that can be erased independently so that valid data can be preserved while old data is purged. PROGRAM and ERASE commands are written to the command interface of the memory. An on-chip program/ erase controller simplifies the process of programming or erasing the memory by taking care of all special operations required to update the memory contents. The end of a PROGRAM or ERASE operation can be detected and any error condition can be identified. The command set required to control the device is consistent with JEDEC standards. CE#, OE#, and WE# control the bus operation of the device and enable a simple connection to most microprocessors, often without additional logic. The M29EW supports asynchronous random read and page read from all blocks of the array. It also features an internal program buffer that improves throughput by programming 256 words via one command sequence. The device contains a 128-word extended memory block which overlaps addresses with array block 0. The user can program this additional space and then protect it to permanently secure the contents. The device also features different levels of hardware and software protection to secure blocks from unwanted modification. Refer to TN-13-30, System Design Considerations with Micron Flash Memory, for details on system design and V CC and V CCQ signals. Figure 1: Logic Diagram VCC VCCQ VPP/WP# 15 A[MAX:0] DQ[14:0] DQ15/A-1 WE# CE# RY/BY# OE# RST# BYTE# VSS PDF: 09005aef84dc44a7 m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN 8 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2012 Micron Technology, Inc. All rights reserved. 32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash Signal Assignments Signal Assignments Figure 2: 56-Pin TSOP (Top View) RFU A22 A15 A14 A13 A12 A11 A10 A9 A8 A19 A20 WE# RST# A21 VPP/WP# RY/BY# A18 A17 A7 A6 A5 A4 A3 A2 A1 RFU RFU 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Notes: PDF: 09005aef84dc44a7 m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN 1. 2. 3. 4. RFU RFU A16 BYTE# VSS DQ15/A-1 DQ7 DQ14 DQ6 DQ13 DQ5 DQ12 DQ4 VCC DQ11 DQ3 DQ10 DQ2 DQ9 DQ1 DQ8 DQ0 OE# VSS CE# A0 RFU VCCQ A-1 is the least significant address bit in x8 mode. A21 is valid for 64Mb and above; otherwise, it is RFU. A22 is valid for 128Mb and above; otherwise, it is RFU. RFU = Reserved for future use. 9 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2012 Micron Technology, Inc. All rights reserved. 32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash Signal Assignments Figure 3: 48-Pin TSOP (Top View) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 A15 A14 A13 A12 A11 A10 A9 A8 A19 A20 WE# RST# A21 VPP/WP# RY/BY# A18 A17 A7 A6 A5 A4 A3 A2 A1 Notes: PDF: 09005aef84dc44a7 m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 1. 2. 3. 4. A16 BYTE# VSS DQ15/A-1 DQ7 DQ14 DQ6 DQ13 DQ5 DQ12 DQ4 VCC DQ11 DQ3 DQ10 DQ2 DQ9 DQ1 DQ8 DQ0 OE# VSS CE# A0 A-1 is the least significant address bit in x8 mode. A21 is valid for 64Mb and above; otherwise, it is RFU. For 48-Pin, there is no VCCQ pin, VCC also supply IO, it can only be 2.7V-3.6V RFU = Reserved for future use. 10 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2012 Micron Technology, Inc. All rights reserved. 32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash Signal Assignments Figure 4: 48-Ball BGA (Top and Bottom Views) 3 2 1 4 5 6 6 5 A9 A13 A13 A9 4 3 2 1 A A A7 RY/BY# WE# A3 WE# RY/BY# A7 A3 B B A4 A17 VPP/WP#RST# A8 A12 A12 A8 RST# VPP/WP# A17 A4 A2 A6 A21 A10 A14 A14 A10 A21 A6 A2 C C A18 A18 D D A5 A1 A20 A19 A11 A15 A15 A11 A19 A20 A5 A1 E E D0 D2 D5 D7 CE# D8 D10 D12 D14 BYTE# D7 D5 D2 D0 A0 BYTE# D14 D12 D10 D8 CE# A16 A16 A0 F F G G OE# D9 D11 VCC D13 D15/A-1 VSS D1 D3 D4 D6 D15/A-1 D13 VCC D11 D9 OE# D4 D3 D1 VSS H H VSS VSS BGA Top view – ball side down Notes: PDF: 09005aef84dc44a7 m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN 1. 2. 3. 4. D6 BGA Bottom view – ball side up A-1 is the least significant address bit in x8 mode. A21 is valid for 64Mb and above; otherwise, it is RFU. For 48-Pin, there is no VCCQ pin, VCC also supply IO, it can only be 2.7V-3.6V RFU = Reserved for future use. 11 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2012 Micron Technology, Inc. All rights reserved. 32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash Signal Assignments Figure 5: 64-Ball Fortified BGA (Top and Bottom Views) 1 2 3 4 5 6 7 8 8 7 6 4 5 3 2 1 A A RFU A3 A7 RY/BY# WE# A9 A13 RFU RFU A13 A9 WE# RY/BY# A7 A3 RFU B B RFU A4 A17 VPP/WP# RST# A8 A12 A22 A22 A12 A8 RST# VPP/WP# A17 A4 RFU C C RFU A2 A6 A18 A21 A10 A14 RFU RFU A14 A10 A21 A18 A6 A2 RFU D D RFU A1 A5 A20 A19 A11 A15 VCCQ RFU A0 D0 D2 D5 D7 A16 VCCQ CE# D8 D10 D12 RFU OE# D9 D11 RFU VSS D1 D3 VCCQ A15 A11 A19 A20 A5 A1 RFU D7 D5 D2 D0 A0 RFU D14 BYTE# RFU RFU BYTE# D14 D12 D10 D8 CE# VCCQ VCC D13 D15/A-1 RFU RFU D15/A-1 D13 VCC D11 D9 OE# RFU D4 D6 RFU D4 D3 D1 VSS RFU E E VSS VSS A16 F F G G H H VSS RFU Fortified BGA Top view – ball side down Notes: PDF: 09005aef84dc44a7 m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN 1. 2. 3. 4. VSS D6 Fortified BGA Bottom view – ball side up A-1 is the least significant address bit in x8 mode. A21 is valid for 64Mb and above; otherwise, it is RFU. A22 is valid for 128Mb and above; otherwise, it is RFU. RFU = Reserved for future use. 12 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2012 Micron Technology, Inc. All rights reserved. 32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash Signal Descriptions Signal Descriptions The signal description table below is a comprehensive list of signals for this device family. All signals listed may not be supported on this device. See Signal Assignments for information specific to this device. Table 4: Signal Descriptions Name Type Description A[MAX:0] Input Address: Selects the cells in the array to access during READ operations. During WRITE operations, they control the commands sent to the command interface of the program/erase controller. CE# Input Chip enable: Activates the device, enabling READ and WRITE operations to be performed. When CE# is HIGH, the device goes to standby and data outputs are at High-Z. OE# Input Output enable: Controls the bus READ operation. WE# Input Write enable: Controls the bus WRITE operation of the command interface. VPP/WP# Input VPP/Write Protect: Provides WRITE PROTECT function and VPPH function. These functions protect the lowest or highest block or top two blocks or bottom two blocks, enable the device to enter unlock bypass mode and accelerate program speed, respectively. (Refer to Hardware Protection, Bypass Operations, and Program Operations for details.) A 0.1μF capacitor should be connected between VPP/WP# and VSS to decouple the current surges from the power supply when VPPH is applied. The PCB track widths must be sufficient to carry the currents required during PROGRAM and ERASE operation when VPPH is applied. (See DC Characteristics.) BYTE# Input Byte/word organization select: Switches between x8 and x16 bus modes. When BYTE# is LOW, the device is in x8 mode; when HIGH, the device is in x16 mode. RST# Input Reset: Applies a hardware reset to the device, which is achieved by holding RST# LOW for at least tPLPX. After RST# goes HIGH, the device is ready for READ and WRITE operations (after tPHEL or tRHEL, whichever occurs last). See RESET AC Specifications for more details. DQ[7:0] I/O Data I/O: Outputs the data stored at the selected address during a READ operation. During WRITE operations, they represent the commands sent to the command interface of the internal state machine. DQ[14:8] I/O Data I/O: Outputs the data stored at the selected address during a READ operation when BYTE# is HIGH. When BYTE# is LOW, these pins are not used and are High-Z. During WRITE operations, these bits are not used. When reading the status register, these bits should be ignored. DQ15/A-1 I/O Data I/O or address input: When the device operates in x16 bus mode, this pin behaves as data I/O, together with DQ[14:8]. When the device operates in x8 bus mode, this pin behaves as the least significant bit of the address. Except where stated explicitly otherwise, DQ15 = data I/O (x16 mode); A-1 = address input (x8 mode). PDF: 09005aef84dc44a7 m29ew_32Mb-128Mb.pdf - Rev. B 11/12 EN 13 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2012 Micron Technology, Inc. All rights reserved. 32Mb, 64Mb, 128Mb: 3V Embedded Parallel NOR Flash Memory Organization Table 4: Signal Descriptions (Continued) Name Type RY/BY# Output Description Ready busy: Open-drain output that can be used to identify when the device is performing a PROGRAM or ERASE operation. During PROGRAM or ERASE operations, RY/BY# is LOW, and is High-Z during read mode, auto select mode, and erase suspend mode. After a hardware reset, READ and WRITE operations cannot begin until RY/BY# goes High-Z. (See RESET AC Specifications for more details.) The use of an open-drain output enables the RY/BY# pins from several devices to be connected to a single pull-up resistor to VCCQ. A low value will then indicate that one (or more) of the devices is (are) busy. A 10K Ohm or bigger resistor is recommended as pull-up resistor to achieve 0.1V VOL. VCC Supply Supply voltage: Provides the power supply for READ, PROGRAM, and ERASE operations. The command interface is disabled when VCC
JS28F128M29EWHF 价格&库存

很抱歉,暂时无法提供与“JS28F128M29EWHF”相匹配的价格&库存,您可以联系我们找货

免费人工找货