CNS7108

CNS7108 COAXIAL AMPLIFIED NOISE SOURCE available from stock 50 KHZ TO 100 MHZ D ESCRIPTION The CNS7108 noise module is designed for a wide range of applications. It features high noise output amplitude for uses ranging from encryption to jamming. All biasing and amplification circuitry is built-in making it easy to design into your system. It features a built-in voltage regulator for highly stable output even if your DC supply lines are not. A PPLICATIONS Common Noise Applications CNS7108 TYPICAL DATA 1. Built-in IF Testing: Highly stable flat over frequency noise sources serve to provide built-in test for an IF subsystem. By injecting a stable signal reference through the IF chain, one can calibrate the gain/loss and frequency response. In addition, the noise source can be used to set up Eb/No for built-in stimulated BER testing of digital demodulation. 1. Barrage Jamming: The noise source is fed into the tuning port of a VCO via a bias tee and a positive DC voltage. The random nature of noise makes the output of the VCO to hop around in a given frequency band randomly making an ideal jamming signal. Further circuitry can be used between the noise source and tuning port to shape the noise probability density function (PDF) for the desired jamming effect. S PECIFICATIONS • Frequency: 50 kHz to 100 MHz • Noise Power Spectral Density (No): -87 dBm/Hz (min) • Noise Power (N): -7 dBm • Spectral Flatness: 2 dB (total window) • Bias: • Current Draw: • Peak Factor: 12 Vdc , Internally Regulated 50 mA Max 5:1 • Operating Temp: -55 to +85 C • Storage Temp: -55 to 125 C 2. Random Number Generation for Encryption: Noise sources being truly random (not pseudorandom) give the ultimate in secure communication because of their ability to generate a truly random number pattern. This can be used to seed an encryption key for authentication. The noise signal can be fed directly into an A/D converter for sampling or a simpler techniques might use a comparator. Further shaping of the noise is often employed whether either analog if in front of the A/D converter or afterwards using DSP. MICRONETICS, HUDSON, NH 03051 / TEL: 603-883-2900 / FAX: 603-882-8987 / NOISESALES@MICRONETICS.COM WWW.MICRONETICS.COM