NOD-5110

NOD 5000 SERIES BROADBAND NOISE INSTRUMENTS 10HZ TO 18GHZ Description NOD Series Noise Instruments are portable, small and lightweight (less than 10 lbs.) and designed to provide accurate carrier-tonoise measurements in the lab, field or factory. An attenuator is included and calibrated at the connector, so there’s no need to compensate for external control components. Specifications NOD SERIES OUTPUT CHARACTERISTICS MODEL NOD-2000 NOD-5101 NOD-5102 NOD-5103 NOD-5104 NOD-5105 NOD-5106 NOD-5107 NOD-5108 NOD-5109 NOD-5110 NOD-5111 NOD-5112 NOD-5124 NOD-5200 NOD-5250 NOD-5300 FREQUENCY 1.8GHz-2.2GHz 10Hz-20kHz 10Hz-100kHz 10Hz-500kHz 100Hz-3MHz 100Hz-10MHz 100Hz-25MHz 100Hz-100MHz 100Hz-300MHz 100Hz-500MHz 300MHz-1GHz 1GHz-2GHz 10MHz-2GHz 2GHz-4GHz 100Hz-1GHz 100Hz-1500MHz 2GHz-18GHz FLATNESS ±0.5 dB ±0.5 dB ±0.5 dB ±0.5 dB ±0.75 dB ±1.0 dB ±1.25 dB ±1.5 dB ±2.0 dB ±2.0 dB ±2.0 dB ±2.0 dB ±2.0 dB ±2.0 dB ±2.0 dB ±2.5 dB ±3.0 dB VSWR 2.0:1 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 2.0:1 2.0:1 2.0:1 2.0:1 2.2:1 2.5:1 RF OUTPUT POWER (dBm/Hz) (dBm) -77 -33 -40 -47 -55 -60 -64 -70 -75 -77 -79 -80 -83 -103 -80 -83 -112 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 +10 -10 +10 +10 -10 I Operating Temperature: 0 to +70 oC I Supply Voltage: 110 VAC/60 Hz or 220 VAC/50 Hz I Temperature Stability: .025 dB/o C I Output Impedance: 50 ohm I Peak Factor: 5:1 I Attenuation Range: 0 dB to 10 dB in 1 dB steps or 0 dB to 100 dB in 10 dB steps I Dimensions: 9.38”W x 3.96”H x 10.75”D Applications I Simulation of spread spectrum signals (CDMA) I Carrier-to-noise measurement I Bit error rate testing I Y Factor measurements I Modem testing I Optional 2nd & 3rd Rotary Attenuators available I Calibration Services offered MICRONETICS / 26 HAMPSHIRE DRIVE / HUDSON, NH 03051 / TEL: 603-883-2900 / FAX: 603-882-8987 WEB: WWW.MICRONETICS.COM