42117-012

42117 NEGATIVE HIGH TEMPERATURE FIXED VOLTAGE REGULATOR Designed to use in high temperature environments Mii HYBRID MICROELECTRONICS PRODUCTS DIVISION Features: • • • • • Operating temperature +200°C Output current to 1.0 A Output voltage to –30 V Internal short circuit protection, foldback and current limiting Isolated TO-258 package Applications: • • Down hole Harsh environment application DESCRIPTION The 42117 series of fixed voltage regulators covers the output voltage range from -5 VDC through -30 VDC. These voltage regulators are fabricated using hybrid techniques and will operate at case temperatures up to +200°C. These devices are complete with internal short circuit protection which includes voltage shutdown and current foldback. The 42117 series voltage regulators normally do not require any additional components. However, for good design practice, an external filter cap of 2µF should be installed at the input, as close to the case as possible. ABSOLUTE MAXIMUM RATINGS AT 200°C CASE TEMPERATURE Output Current (IOUT) ............................................................................................................................................................ 1.0 A Input Voltage (VIN) ......................................................................................................................................................... -38 VDC Storage Temperature (TSTG)............................................................................................................................................. +250°C Power Dissipation Pd.............................................................................................................................................................. 8 W Typical Connection Diagram D1 HEADER RECTIFIED INPUT VIN VOUT REGULATED OUTPUT 2 AS REQUESTED + + 2uf COMMON AS REQUESTED + Note: D1 should be installed for input safety Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 12/12/01 1 42117 NEGATIVE HIGH TEMPERATURE, FIXED VOLTAGE REGULATOR ELECTRICAL CHARACTERISTICS PARAMETER *Output Voltage Note 1 *Line Regulation Note 2 Load Regulation Ripple Rejection at 120 Hz Standby Current Short Circuit Current Short Circuit Current Foldback Current (knee) Foldback Current (knee) Noise Output Differential Voltage * ( ∆V= VIN – VOUT ) TEST CONDITIONS IOUT = 1.0 A VIN = VOUT +3 VDC VIN = VOUT -3 VDC to -38 VDC IOUT = 50 mA VIN = VOUT -5 VDC IOUT = 0.05 to 1.0A VIN = VOUT -5 VDC IL= 300 mA VIN = VOUT -5 VDC IOUT = 0 VIN = VOUT -5 VDC VIN = VOUT -5 VDC VIN = VOUT -5 VDC VIN = VOUT -5 VDC VIN = VOUT -5 VDC IOUT = 300 mA IOUT = 300 mA TEMPERATURE +25°C to +200°C +25°C to +200°C +25°C to +200°C +25°C +25°C +25°C +200°C +25°C +200°C +25°C +25°C to +200°C TYPICAL VOUT ± 1.0% VOUT ± 0.5% VOUT ± 0.5% at 25°C ± 1.0% at 200°C -50 dB 30 mA 400 mA 200 mA 2A 1.5 A 2 mVRMS 3 VDC MIN Note 1. VOUT for 5 volt ± 2% Note 2. Line regulation for 5 volt devices ±1% *VIN = -10 V Min TYPE 42117-005 42117-012 42117-015 42117-018 42117-024 42117-030 VOUT TABLE 1 (see note) MAX IOUT A VDC 1.0 1.0 1.0 1.0 1.0 1.0 -5 -12 -15 -18 -24 -30 TYP IKNEE (A at 25°C) 2.0 2.0 2.0 2.0 2.0 2.0 NOTE: Under condition (VIN – VOUT) x lOUT ≤ 8 watts at 200°C Option: 1) Other output voltage available 2) MIL-STD-883 type screening available Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 12/12/01 2 42117 NEGATIVE HIGH TEMPERATURE, FIXED VOLTAGE REGULATOR Mechanical Configuration .040 .690 .345 TAB TO BE BENT .002 .540 123 .730 +.020 .060 DIA. .400 .200 .702 .825 .145 .250 Pin 1 2 3 Function VOUT Common VIN Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 12/12/01 3