4N24U

4N22U 4N23U 4N24U 05/29/03 6 PIN LCC OPTOCOUPLERS OPTOELECTRONIC PRODUCTS DIVISION Features: • MIL-PRF-19500/486 Qualified • Base lead provided for conventional transistor biasing • High gain, high voltage transistor • Miniature package saves circuit board area • High voltage electrical isolation…1KV rating DESCRIPTION Applications: • • • • • Line Receivers Switchmode Power Supplies Signal ground isolation Process Control input/output isolation Motor control High gain optocoupler utilizing GaAIAs infrared LED optically coupled to an N-P-N silicon phototransistor in a 6-pin leadless chip carrier. The 4N22U, 4N23U and 4N24U optocouplers can be supplied to customer specifications as well as JAN, JANS, JANTX, and JANTXV quality levels. *ABSOLUTE MAXIMUM RATINGS Input to Output Voltage.................................................................................................................................................... ±1000V Collector-Base Voltage ........................................................................................................................................................... 35V Collector-Emitter Voltage........................................................................................................................................................ 35V Emitter-Collector Voltage.......................................................................................................................................................... 4V Input Diode Reverse Voltage.................................................................................................................................................... 2V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ....................................40mA Continuous Collector Current ..............................................................................................................................................50mA Peak Diode Current .................................................................................................................................................................. 1A Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) ................................300mW Operating Free-Air Temperature Range ............................................................................................................-55°C to +125°C Storage Temperature..........................................................................................................................................-65°C to +125°C Solder Temperature (10 seconds)...................................................................................................................................... 240°C Notes: 1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C. 2. Derate linearly to 125°C free-air temperature at the rate of 3 mW/°C above 65°C. * JEDEC registered data Package Dimensions 0.250 [6.35] 0.240 [6.10] Schematic Diagram 0.080 [2.03] 0.066 [1.68] 0.175 [4.45] 0.165 [4.19] 1 A C PIN 1 IDENTIFIER 3 E 0.028 [0.71] 0.022 [0.56] 0.105 [2.67] 0.095 [2.41] 5 2 1 6 3 4 5 6 0.055 [1.40] 0.045 [1.14] K B 4 0.098 [2.49] 0.082 [2.08] 0.070 [1.78] 5 PLS 0.060 [1.52] ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] 4N22U, 4N23U, and 4N24U 5 - 21 6 PIN LCC OPTOCOUPLERS MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 05/29/03 ELECTRICAL CHARACTERISTICS INPUT LED TA = 25°C Unless otherwise specified PARAMETER Input Diode Static Reverse Current Input Diode Static Forward Voltage -55 C ° +25 C ° +100 C ° SYMBOL IR VF MIN 1.0 0.8 0.7 MAX 100 1.5 1.3 1.2 UNITS µA V TEST CONDITIONS VR = 2V IF = 10mA NOTE OUTPUT TRANSISTOR TA = 25°C Unless otherwise specified PARAMETER Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage SYMBOL V(BR)CBO V(BR)CEO V(BR)EBO MIN 35 35 4 MAX UNITS V V V TEST CONDITIONS IC = 100µA, IB = 0, IF = 0 IC = 1mA, IB = 0, IF = 0 IC= 0, IE = 100µA, IF = 0 NOTE COUPLED CHARACTERISTICS TA = 25°C Unless otherwise specified PARAMETER On State Collector Current 4N22U 4N23U 4N24U 4N22U 4N23U 4N24U 4N22U 4N23U 4N24U 4N22U 4N23U 4N24U +25°C 4N22U 4N23U 4N24U ALL ALL 4N22U 4N23U 4N24U 4N22U 4N23U 4N24U SYMBOL IC(ON) MIN 0.15 0.2 0.4 2.5 6.0 10.0 1.0 2.5 4.0 1.0 2.5 4.0 MAX UNITS mA TEST CONDITIONS VCE = 5V, IB = 0, IF = 2mA NOTE On State Collector Current mA VCE = 5V, IB = 0, IF = 10mA mA VCE = 5V, IB = 0, IF = 10mA mA VCE = 5V, IB = 0, IF = 10mA 100 100 0.3 0.3 0.3 5 15 15 20 15 15 20 nA µA IC(ON) On State Collector Current -55°C On State Collector Current +100°C Off State Collector Current IC(ON) IC(ON) IC(OFF) IC(OFF) VCE(SAT) VCE(SAT) VCE(SAT) RI-O CI-O tr tr tr tf tf tf VCE = 20V, IB = 0, IF = 0mA VCE = 20V, IB = 0, IF = 0mA IC = 2.5mA, IB = 0, IF = 20mA IC = 5mA, IB = 0, IF = 20mA IC = 10mA, IB = 0, IF = 20mA VIN-OUT = 1kV f = 1MHz, VIN-OUT = 1kV VCC = 10V, IF = 10mA, RL = 100Ω 1 1 Off State Collector Current +100°C Collector-Emitter Saturation Voltage Input to Output Resistance Input to Output Capacitance Rise Time 10 11 V V V Ω pF µs µs µs µs µs µs Fall Time VCC = 10V, IF = 10mA, RL = 100Ω NOTE: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. SELECTION GUIDE PART NUMBER 4N22U 4N23U 4N24U JAN4N22U JAN4N23U JAN4N24U JANTX4N22U JANTX4N23U JANTX4N24U JANTXV4N22U JANTXV4N23 JANTXV4N24U JANS4N22U JANS4N23U JANS4N24U PART DESCRIPTION Commercial Commercial Commercial JAN Screened JAN Screened JAN Screened JANTX Screened JANTX Screened JANTX Screened JANTXV Screened JANTXV Screened JANTXV Screened JANS Screened JANS Screened JANS Screened MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 5 - 21