53203

53200 53203 53204 Features: • • • • • • • SPDT SOLID-STATE RELAYS Mii MICROCIRCUITS PRODUCTS DIVISION Applications: • • • • • Heater Load Switching Sensor Activation Remote Signal Activation Servo and synchro control High power switching Replacements for M31-1, M31-1A, M31-2 A SPDT, Break-Before-Make Up to 1500 V RMS Optical Isolation Output current up to 8.2 Amps (53203) Power FET Output Low On-state Resistance Full Military Temperature Operation: -55ºC to +125ºC Military Environmental Screening Available DESCRIPTION The MII 53200, 53203, and 53204 are military SPDT high power, solid-state relays. These light-weight devices are resistant to damage from shock and vibration, and are immune to contact-related problems (contamination, arcing) associated with mechanical equivalents. Optical coupling between the input and output stages provides effective isolation up to 1500 volts AC RMS. Power FET outputs eliminate bipolar offset, and minimize output voltage drop for high current capability. The control logic is CMOS compatible, and will accommodate bias supplies between 4 and 16 VDC. A TTL input driver with pullup resistor may also be used. These solid-state relays are ideal for use in military systems, or wherever high reliability, low power actuation, and light-weight are design considerations. Applications include general-purpose signal switching and electronic load control. ABSOLUTE MAXIMUM RATINGS 1 Isolation Voltage .................................................................................................................................................1000 VAC RMS 3 Continuous Operating Output Voltage : 53200...............................................................................................................80 VDC 53203 ..............................................................................................................80 VDC 53204 ............................................................................................................160 VDC 2 Load Current : 53200 ...........................................................................................................................................4.8 Amps DC 53203 ..........................................................................................................................................8.2 Amps DC 53204...........................................................................................................................................5.2 Amps DC Bias Supply Voltage, VDD .................................................................................................................................................16 VDC Control Logic Input Voltage ..............................................................................................................................................16 VDC Operating Temperature ........................................................................................................................... -55ºC to +125ºC Case Storage Temperature .........................................................................................................................................-55ºC to +125ºC Notes: 1 60 Hz sine wave 2 at 25ºC with 2.0º C/W heat sink Reversing polarity on the output may cause permanent damage. 3 Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 8/12/02 Pg. 1 of 4 53200, 53203, and 53204 ELECTRICAL CHARACTERISTICS TA = +25° C SPDT SOLID-STATE RELAYS PARAMETER Isolation Voltage, I/O Isolation Resistance Continuos Operating Output Voltage 53200 53203 53204 Transient Output Voltage 53200 53203 53204 Load Current: 53200 53203 53204 On Resistance: 53200 53203 53204 Capacitance, I/O Leakage Current: 53200 53203 53204 Bias Supply Voltage, VDD Bias Current Control Logic Voltage Control Logic Current Control Logic Level – High Control Logic Level – Low tr (Rise Time): 53200 53203 53204 ton (Turn-On-Time): 53200 53203 53204 tf (Fall Time) toff (Turn-Off-Time): 53200 53203 53204 td (Dwell Time) Thermal Resistance, θJA: 53200 53203 53204 Thermal Resistance, θJC: 53200 53203 53204 CONDITIONS 60 Hz Sine Wave Input to Case, at 50V MIN 1500 TYP 109 MAX UNIT VAC RMS Ohms 80 80 160 80 80 180 4.8 8.2 5.2 0.3 0.15 0.38 5 20 40 40 16 16 16 2 VDC VDC VDC VDC VDC VDC Amps DC Amps DC Amps DC Ohms Ohms Ohms PF µA µA µA VDC MA VDC µA VDC VDC ms ms ms ms ms ms µs µs µs µs ms ºC/W ºC/W ºC/W ºC/W ºC/W ºC/W 2.0 ºC/W Heat Sink 25 V, 1 MHz Load Voltage = Maximum 4 13 0.75 VDD 0 Load Voltage = 25 VDC RL = 50Ω 0.5 23 20 20 7.0 4.2 4.2 0.15 VDD 2.0 3.0 3.0 3.0 4.0 4.0 50 200 250 250 1.5 Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 8/12/02 Pg. 2 of 4 53200, 53203, and 53204 SPDT SOLID-STATE RELAYS VDD 22 12 CONTROL LOGIC 1 16 3 GND INPUT BUFFER 9 COMMON FET OUTPUT Truth Table INPUT (PIN 1) High Low PIN 12 Closed Open PIN 16 Open Closed Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 8/12/02 Pg. 3 of 4 53200, 53203, and 53204 Package Dimensions SPDT SOLID-STATE RELAYS 2.100 1.750 1.450 .735 Ø.157 2 PLACES .795 (1.390) .240 MAX. (.060) .45 MIN. Ø.040, 6 PLACES 1 3 9 .400 .200 22 16 12 .200 .600 .800 1.000 (BOTTOM VIEW) TOL: ±.010 Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 8/12/02 Pg. 4 of 4