53266

PRELIMINARY DATA SHEET 53266 50VDC - 6A HIGH TEMPERATURE SOLID STATE RELAY Mii MICROCIRCUITS DIVISION Features: • • • • • • Hermetically Sealed Package 6A Continuous Output Current Low Input Current Optically Coupled Input/Output Isolation Tested at 600 VRMS Shock and Vibration Resistant 200°C Operation Applications: • • • Power Distribution/Switching Solenoid Driver Motor Driver DESCRIPTION The 53266 DC solid state relay (SSR) is designed for high temperature applications. This device is resistant to damage from severe shock and vibration, and is immune to contact related problems inherent in electromechanical relays. The SSR is enclosed in a hermetic metal package to ensure reliability in harsh environments. Effective isolation of 600 VRMS between control and load circuits is achieved through the use of optical coupling. Functionally, the device operates as a single-pole single-throw, normally open (1 Form A) DC solid-state relay. The SSR is actuated by an input current of 3 to 15 mA, which can be supplied from standard logic types such as open-collector TTL. Output is provided by a power MOSFET capable of carrying a continuous current of 6 amperes. ABSOLUTE MAXIMUM RATINGS Output Voltage .......................................................................................................................................................50 VDC Continuous Output current ........................................................................................................................................... 6 A Peak Output Current (1) ........................................................................................................................................ 10 A Storage Temperature Range ................................................................................................................. -65ºC to +200ºC Operating Junction Temperature.......................................................................................................................... +210ºC Lead Solder Temperature for 10 seconds ............................................................................................................. 300ºC Continuous Input Current ........................................................................................................................................15 mA Peak Input Current (2) .............................................................................................................................................. 30 mA Reverse Input Voltage.............................................................................................................................................6 VDC WEIGHT: ........................................................................................................................................17 grams (typical) Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION • 905 E. Walnut Street, Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 E-MAIL: hybridsales@micropac.com 05/17/02 www.micropac.com Pg. 1 of 4 PRELIMINARY DATA SHEET 53266 50VDC - 6A High Temperature Solid State Relay ______________________________________________________________________________________________ RECOMMENDED OPERATING CONDITIONS: Parameter Output Voltage Continuous Output Current Input Current (on) Input Voltage (off) Operating Case Temperature Symbol VO (OFF) IO (ON) IF (ON) VF (OFF) TC 3 0 -55 Min. Max. 40 6 15 0.5 200 Units VDC A mA VDC °C ELECTRICAL SPECIFICATIONS TC= -55°C to +200°C unless otherwise specified Parameter Sym. Min. Typ.* Max. Unit s Ω µA VDC VDC µA ms ms ms ms °C/W Test Conditions IF = 10 mA IO = 1 A VF = .5 VDC VO = 50 VDC IF = 10 mA IR = 10 µA RH ≤ 45%, t = 5 s VI-O = 600 VRMS TC = 25°C IF = 10 mA IO = 1 A V load = 40 VDC Pulse width = 10 ms Duty cycle ≤ 1% Notes Output On-Resistance Output Leakage Current Input Forward Voltage Input Reverse Breakdown Voltage Input-Output Leakage Turn-On Time Turn-Off time Rise Time Fall Time Thermal Resistance (junction-case) * All typical values are at TC = 25°C R (ON) IO (OFF) VF VR II-O tON tOFF tR tF θJC    6       0.03  2.50 40  1.0 0.35 0.9 0.2 1.8 0.07 1,000 3.50  1 2.0 2.0 1.8 1.5  3, 4 5 Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION • 905 E. Walnut Street, Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 E-MAIL: hybridsales@micropac.com 05/17/02 www.micropac.com Pg. 2 of 4 PRELIMINARY DATA SHEET 53266 50VDC - 6A High Temperature Solid State Relay ______________________________________________________________________________________________ Notes: 1. 2. 3. 4. 5. Non-repetitive, pulse width ≤ 10ms, TC = 25°C. Non-repetitive, pulse width ≤ 100µs, TC = 25°C. Input pins shorted together and output pins shorted together. Input-output potential applied momentarily, not an operating condition. Rise time is measured from 10% to 90% of load current (90% to 10% of VO). Fall time is measured from 90% to 10% of load current (10% to 90% of VO). CAUTION: Care should be taken not to exceed the maximum power dissipation and maximum junction temperature when repetitively switching loads. INPUT ON OFF OUTPUT ON OFF Figure 1. Truth Table Figure 1. Terminal Connections +V C RS +DC SUPPLY R LOAD -V C TOP VIEW OUTPUT GND Figure 2. Terminal Connections Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION • 905 E. Walnut Street, Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 E-MAIL: hybridsales@micropac.com 05/17/02 www.micropac.com Pg. 3 of 4 PRELIMINARY DATA SHEET 53266 50VDC - 6A High Temperature Solid State Relay C L 1.870 MAX 1.520 0.760 0.156 DIA THRU 2 PL 0.500 C L 0.170 R 2 PL 45° 1.000 4 PL 0.125, TYP 5 PLACES TOLERANCES NON-ACCUM 0.312 0.040 DIA, 6 PL 0.120 1.000 0.275 MAX 0.212 0.050 Dimensions: inches Pin Function 1 +IN 2 -IN 3 +OUT 4 +OUT 5 -OUT 6 -OUT Notes: 1. For +OUT and -OUT functions, both pins must be used to meet the rated current. 2. ESD symbol (∆) indicates pin 1. Figure 3. Case Outline Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION • 905 E. Walnut Street, Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 E-MAIL: hybridsales@micropac.com 05/17/02 www.micropac.com Pg. 4 of 4