61053-004

61053 SILICON PHOTOTRANSISTOR “PIGTAIL” (TYPE GS3020) Mii OPTOELECTRONIC PRODUCTS DIVISION Features: • • • • • Hermetically sealed High sensitivity Pigtail version available Suitable for high-density pc board mounting Spectrally matched to the 62017 Series LED. Applications: • • • • Incremental encoding Reflective sensors Position sensors Level sensors DESCRIPTION The 61053 is an N-P-N Planar Silicon phototransistor in a package designed to be mounted in a double-clad printed circuit board. It is available in a range of sensitivities and is lensed for minimum response to stray light. High sensitivity, low dark current leakage, and low saturation voltage make this device ideal for interfacing with TTL circuits. This sensor is also available with a lead attached to the case so that it may be connected without the use of printed circuit boards. Available custom binned to customer specifications or screened to MIL-PRF-19500. ABSOLUTE MAXIMUM RATINGS Storage Temperature..........................................................................................................................................-65°C to +150°C Operating Temperature (See part selection guide for actual operating temperature) ......................................-65°C to +125°C Collector-Emitter Voltage........................................................................................................................................................ 50V Emitter-Collector Voltage.......................................................................................................................................................... 7V Power Dissipation (Derate at the rate of 0.5 mW/°C above 25°C) ...................................................................................50mW Lead Soldering Temperature (3 minutes) ......................................................................................................................... 240°C Package Dimensions Schematic Diagram 0.114 [2.90] Ø.025 [0.64] 1.000 [25.40] OPTIONAL C E 0.100 [2.54] C E Ø0.063 [Ø1.60] Ø0.077 [Ø1.96] Ø0.095 [Ø2.41] ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] 0.089 [2.26] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 6-6 61053 ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. SILICON PHOTOTRANSISTOR “PIGTAIL” (TYPE GS3020) PARAMETER Light Current 61053-X01 61053-X02 61053-X03 61053-X04 61053-XXX 61053-XXX 61053-XXX 61053-X01 61053-X02 61053-X03 61053-X04 61053-X01 61053-X01 SYMBOL IL ID BVCEO BVECO MIN 0.7 1.5 3.0 6.0 50 7 TYP MAX 2.0 4.0 7.0 -25 UNITS mA nA V V TEST CONDITIONS VCE = 5.0V, H = 5 mW/cm2 VCE = 30V, H = 0 IC = 100µA IE = 100µA RL = 1KΩ, VCC = 5V, IL = 1.0mA NOTE 1 Dark Current Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Light Current Rise Time tr VCE (sat) Saturation Voltage Angular Response 2.0 3.0 5.0 7.0 0.3 12 V degrees IC = 0.4mA, H = 5 mW/cm2 2 θ NOTES: 1. Irradiance in mW/cm2 from a tungsten source at a color temperature of 2870K.. 2. The angle between incidence for peak response and incidence for 50% of peak response. ANGULAR RESPONSE R E L A T IV E R E S P O N S E [% 100 RELATIVE SPECTRAL RESPONSE 100 90 Vcc PULSE RESPONSE TEST CIRCUIT AND WAVEFORM 90% 80 RELATIVE RESPONSE [%] 80 70 60 50 40 30 20 10 60 H DUT 40 10% IL RL OUTPUT tr tf 20 0 -4 0 -3 0 -2 0 -1 0 0 10 20 30 40 0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 A N G L E [D E G R E E S ] WAVELENGTH [um] NORMALIZED LIGHT CURRENT versus RADIATION FLUX DENSITY 10 T =25°C J V =50 V CC 2.0 1.8 1.6 NORMALIZED LIGHT CURRENT versus TEMPERATURE Vcc = 5.0 V NOTE 1 RL =100 I L. LIGHT CURRENT [NORMALIZED TO 20 mW/cm 2 TUNGSTEN SOURCE] I L [NORMALIZED] 20 1.0 GaAs SOURCE 1.4 1.2 1.0 0.8 0.6 0.4 TUNGSTEN SOURCE 0.1 0.01 0.2 0.5 1.0 20 5.0 10 0.2 0 -100 -75 -50 -25 0 25 50 75 100 125 150 N. RADIATION FLUX DENSITY [mW/cm 2] TA AMBIENT TEMPERATURE [°C] RECOMMENDED OPERATING CONDITIONS: PARAMETER Bias Voltage-Collector/Emitter Irradiance (H) SYMBOL IF H MIN 5 15 MAX 10 25 UNITS mA mW/cm2 SELECTION GUIDE PART NUMBER PART DESCRIPTION 61053-001 Silicon Phototransistor in coax package, commercial version 66153-101 Silicon Phototransistor in coax package (-55° to +100°C) with 100% screening 61053-002 Silicon Phototransistor in pill package, commercial version 61053-102 Silicon Phototransistor in pill package (-55° to +100°C) with 100% screening 61053-003 Silicon Phototransistor in pill package, commercial version 61053-103 Silicon Phototransistor in pill package (-55 °to +100°C) with 100% screening 61053-004 Silicon Phototransistor in pill package, commercial version 61053-104 Silicon Phototransistor in pill package (-55° to +100°C) with 100% screening NOTE: Add L following dash number ( e.g. -004L ) to indicate loop lead. IL Range 0.7 to 2mA 0.7 to 2mA 1.5 to 4mA 1.5 to 4mA 3 to 7mA 3 to 7mA 6+mA 6+mA MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 6-7