61060-101

61060 PHOTODIODE “PIGTAIL” Mii OPTOELECTRONIC PRODUCTS DIVISION Features: • • • • • Hermetically sealed High sensitivity Small package Suitable for high-density pc board mounting Spectrally matched to the 62017 series LED. Applications: • • • • Incremental encoding Reflective sensors Position sensors Level sensors DESCRIPTION The 61060 is a Silicon Photodiode in a package designed to be mounted in a single-clad printed circuit board. It is available with a wide angle flat lens or narrow angle domed lens for minimum response to stray light. High sensitivity, low dark current leakage, and low saturation voltage make this device ideal for interfacing with TTL circuits. Also available with lead attached to the case so that it may be connected without the use of a printed circuit board. Available in custom binned to customer specifications or screened to MIL-PRF-19500. ABSOLUTE MAXIMUM RATINGS Storage Temperature........................................................................................................................................... -65°C to +150°C Operating Temperature (See part selection guide for actual operating temperature)........................................ -55°C to +125°C Reverse Voltage .......................................................................................................................................................................50V Power Dissipation (Derate at the rate of 1.67 mW/°C above 25°C) ................................................................................... 75mW Lead Soldering Temperature (3 minutes) ............................................................................................................................ 240°C Package Dimensions Schematic Diagram Ø0.0810 Ø0.0810 0.0490 A 0.1730 0.1460 ANODE CATHODE 0.450 min 0.450 min K Dia = 0.018 -XX1 -XX2/XX3 DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED ALL DIMENSIONS NOMINAL MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 6 - 16 61060 ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. SILICON PHOTODIODE “PIGTAIL” PARAMETER Light Current Dark Current Reverse Breakdown Voltage Rise Time Angular Response 61060-XXX 61060-XXX 61060-XXX 61060-XXX 61060-X01 61060-X02 SYMBOL IL ID VBR MIN 5.0 TYP 15 MAX UNITS µA TEST CONDITIONS VR = 5.0V, H = 20mW/cm VR = 10V, H = 0 IR = 5µA, H = 0 VR = 5V, 2 NOTE 1 1 25 50 300 30 12 nA V nS degrees tr θ 2 NOTES: 2 1. Irradiance in mW/cm from a tungsten source at a color temperature of 2870K. 2. The angle between incidence for peak response and incidence for 50% of peak response. RECOMMENDED OPERATING CONDITIONS: PARAMETER Reverse Voltage Irradiance (H) PART NUMBER 61060-001 61060-101 61060-002 61060-102 SYMBOL VR H MIN 5 15 MAX 10 25 UNITS V mW/cm2 SELECTION GUIDE PART DESCRIPTION Photodiode in coax package, domed lens, commercial version Photodiode in coax package, domed lens with 100% screening Photodiode in coax package, flat lens, commercial version Photodiode in coax package, flat lens with 100% screening IL Range +5µA +5µA +5µA +5µA MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 6 - 17