61063-001

61063 PHOTODIODE “PILL PACK” Mii OPTOELECTRONIC PRODUCTS DIVISION Features: • • • • • Hermetically sealed High sensitivity Small package Suitable for high-density pc board mounting Spectrally matched to the 62000 series LED. Applications: • • • • Incremental encoding Reflective sensors Position sensors Level sensors DESCRIPTION The 61063 is a Silicon Photodiode in a package designed to be mounted in a double-clad printed circuit board. It is available in a range of sensitivities and is lensed for minimum response to stray light. High sensitivity, low dark current leakage, and low saturation voltage make this device ideal for interfacing with TTL circuits. Available in custom binned to customer specifications or screened to MIL-PRF-19500. ABSOLUTE MAXIMUM RATINGS Storage Temperature......................................................................................................................................... -65°C to +150°C Operating Temperature (See part selection guide for actual operating temperature)...................................... -65°C to +125°C Reverse Voltage ..................................................................................................................................................................... 30V Power Dissipation (Derate at the rate of 1.67 mW/°C above 25°C) ............................................................................... 150mW Lead Soldering Temperature (3 minutes) ......................................................................................................................... 240°C Package Dimensions Schematic Diagram 0 .0 1 9 [0 .4 8 ] 0 .0 0 9 0 .2 3 ] C E R A M IC LENS R 0 .0 1 0 ± 0 .0 0 1 [0 .2 5 ] 0 .0 9 2 [2 .3 4 ] 0 .0 8 4 [2 .1 3 ] Ø 0 .0 6 1 [1 .5 5 ] Ø 0 .0 5 8 [1 .4 7 ] ANODE 0 .0 6 7 [1 .7 0 ] 0 .0 6 3 [1 .6 0 ] CATHODE 0 .0 1 0 [0 .2 5 ] 0 .0 0 5 [0 .0 1 3 ] 0 .0 8 8 [2 .2 4 ] 0 .0 8 2 [2 .0 8 ] 0 .1 1 5 [2 .9 2 ] 0 .1 0 2 [2 .5 9 ] A L L D IM E N S IO N S A R E IN IN C H E S [M IL L IM E T E R S ] 0 .2 4 [0 .6 1 ] 0 .0 1 6 [0 .4 1 ] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 6 - 18 61063 ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. SILICON PHOTODIODE “PILL PACK” PARAMETER Light Current Dark Current Reverse Breakdown Voltage Rise Time Fall Time Angular Response 61063-X01 61063-XXX 61063-XXX 61063-X01 61063-X01 61063-X01 SYMBOL IL ID VBR MIN 6.0 TYP 15 MAX UNITS µA TEST CONDITIONS VR = 5.0V, H = 20mW/cm VCE = 5V, H = 0 IR = 100µA, H = 0 VR = 5V VR = 5V 2 NOTE 1 1 250 15 300 300 24 nA V nS nS degrees tr tf θ 2 NOTES:6 2 1. Irradiance in mW/cm from a tungsten source at a color temperature of 2870K. 2. The angle between incidence for peak response and incidence for 50% of peak response. RECOMMENDED OPERATING CONDITIONS: PARAMETER Reverse Voltage Irradiance (H) SYMBOL VR H MIN 5 15 MAX 10 25 UNITS V mW/cm 2 SELECTION GUIDE PART NUMBER 61063-001 61063-101 PART DESCRIPTION Silicon Photodiode in pill package, commercial version Silicon Photodiode in pill package (-55° to +100°C) with 100% screening IL Range +6µA +6µA MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 6 - 19