62074-101

62074 FIBER OPTIC GaAlAs LIGHT EMITTING DIODE Mii OPTOELECTRONIC PRODUCTS DIVISION Features: • • • • Hermetically Sealed High Radiant Output for Fiber Optic Applications High Speed Spectrally Matched to the 61082 Series PIN Diode Applications: • • • • Computer Peripheral Link Tempest Applications Mobile Communications Local Area Networks DESCRIPTION The 62074 Light Emitting Diodes are designed to interface with multimode fibers from 50/125 to 200/300 microns. These LED’s convert electrical current into optical power that can be used in fiber optic communication. This series provides high irradiance and is mounted on a TO-46 header with metal protective cap. Available binned to customer specifications and/or screened to MIL-PRF-19500. ABSOLUTE MAXIMUM RATINGS 25°C FREE AIR TEMPERATURE UNLESS NOTED Storage Temperature............................................................................................................................................. -55°C to +150°C Operating Temperature ......................................................................................................................................... -40°C to +125°C Reverse Voltage( at 25°C case temperature) .........................................................................................................................1Vdc Forward Current-Continuous................................... ....(See note 1).................................................................................... 100mA Soldering Temperature (1/16 inch from case for 10 seconds)..........(See note 2) ............................................................... 240°C Transmission Rate at 100mA IF ....................................................................................................................................... 10Mbits/s NOTES: 1. Derate linearly to 125°C free-air temperature at the rate of 1.0 mA/°C. 2. RMA flux is recommended. Package Dimensions Schematic Diagram .131 [3.33] .121 [3.07] 0.030 [0.76] MAX 3 LEADS 0.019 Ø [0.48] .016Ø [0.41] CASE Ø0.100 [Ø2.54] NOM .048 [1.22] .028 [0.71] CATHODE .046 [1.17] .036 [0.91] 45° A .220Ø [5.59] .208Ø [5.28] .185Ø [4.70] .182Ø [4.62] 0.500 [12.70] MIN ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] ANODE K MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 6 - 32 62074 ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. FIBER OPTIC GaAlAs LIGHT-EMITTING DIODE PARAMETER Output Power Coupled Power Out Forward Voltage Reverse Breakdown Voltage Reverse Current Radiation Rise/Fall Time Peak Wavelength 62074-X01 62074-X02 62074-XX1 62074-X02 62074-XXX 62074-XXX 62074-XXX 62074-XXX 62074-XXX SYMBOL PO POC VF BVR IR tR λP MIN 2.5 150 50 TYP 7.5 MAX UNITS mW µW TEST CONDITIONS IF = 100mA IF = 100mA IF = 100mA IR = 10µA VR = 1.0V IF = 100mA Prebias @ 5 mA NOTE 1 2.0 1 6 10 10 830 870 V V µA ns nm IF = 50mA NOTES: 1. Tested using a 100/140µm fiber with a 0.29nA. Actual coupled power may vary due to alignment procedures and/or receptable and fiber tolerances. RECOMMENDED OPERATING CONDITIONS: PARAMETER Forward Current Transmission Rate SYMBOL IF MIN 75 10 MAX 100 UNITS mA MBits/S SELECTION GUIDE PART NUMBER 62074-001 62074-101 62074-002 62074-102 GaAlAs Fiber Optic LED in TO-46 GaAlAs Fiber Optic LED in TO-46 GaAlAs Fiber Optic LED in TO-46 GaAlAs Fiber Optic LED in TO-46 PART DESCRIPTION package, commercial version package (-55° to +125°C) with 100% screening package, commercial version package (-55° to +125°C) with 100% screening PO Range 2.0-5.0 2.0-5.0 2.5-5.0 2.5-5.0 MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 6 - 33