66013-001

66013 DUAL CHANNEL, HERMETICALLY SEALED, HIGH-SPEED 6N134 OPTOCOUPLER Mii OPTOELECTRONIC PRODUCTS DIVISION Features: • • • • • DSCC Approved 8102801EX 5 MHz bandwidth typical 1500 Vdc isolation test voltage TTL compatible input and output High radiation immunity Faraday shield to provide high common mode rejection Applications: • • • • • • Military and space High reliability systems Voltage level shifting Isolated receiver input Communication systems Medical systems • DESCRIPTION The 66013 dual channel optocoupler consists of two LED’s optically coupled to two high speed, high gain inverting detector gates. Maximum isolation can be achieved while providing TTL outputs capable of switching with propagation delays of 55ns typical. The 66013 is a 16 pin dual-in-line, hermetically sealed package and is available in standard and MIL-PRF-38534 screened versions or tested to customer specifications. ABSOLUTE MAXIMUM RATINGS Storage Temperature..........................................................................................................................................-65°C to +150°C Operating Free-Air Temperature Range ............................................................................................................-55°C to +125°C Lead Solder Temperature (For 10s, 1/16” [1.6mm] from package)................................................................................... 260°C Peak Forward Input Current (each channel) .............................................................................................. 40mA (1ms duration) Average Forward Input Current (each channel)................................................................................................................. 20mA Input Power Dissipation (each channel)............................................................................................................................ 35mW Reverse Input Voltage (each channel) .................................................................................................................................... 5V Supply Voltage.........................................................................................................................................7V(1 minute maximum) Output Current - IO (each channel) ......................................................................................................................................25mA Output Power Dissipation (each channel) .........................................................................................................................40mW Output Voltage - VO (each channel)......................................................................................................................................... 7V Total Power Dissipation (both channels)..........................................................................................................................350mW Package Dimensions .800±.020 [20.32] Schematic Diagram 2 A Vcc Vo1 15 14 0.290 [7.37] 1 K Vo2 12 PIN 1 0.120 [3.05] 6 0.175 [4.45] 0.301 [7.65] A 0.100 [2.54] 0.018 [0.46] 0.011 [0.28] 5 K GND 10 ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 22 66013 ELECTRICAL CHARACTERISTICS PARAMETER High Level Output Current Low Level Output Voltage High Level Supply Current Low Level Supply Current Input Forward Voltage Input Reverse Breakdown Voltage Input-Output Insulation Leakage Current (Both Channels) (Both Channels) DUAL CHANNEL, HERMETICALLY SEALED, HIGH SPEED 6N134 OPTOCOUPLER Ta=-55°C TO AT 125°C UNLESS OTHERWISE SPECIFIED. SYMBOL IOH VOL ICCH ICCL VF BVR MIN TYP 5 0.35 18 26 1.5 MAX 250 0.6 28 36 1.75 1.0 UNITS µA V mA mA V V µA TEST CONDITIONS VCC = 5.5V, VO = 5.5V, IF = 250µA VCC = 5.5V IF = 10mA IOL(Sinking) = 10mA VCC = 5.5V, IF = 0 VCC = 5.5V, IF = 20mA IF = 20mA IR = 10µA VI—0 = 1500Vdc, Relative Humidity = 45% ta = 25°C, t = 5s RL = 510Ω, CL = 50pF If = 13mA, Ta = 25°C RL = 510Ω, CL = 50pF If = 13mA, Ta = 25°C RL = 510Ω, CL = 50pF IF = 13mA, Ta = 25°C RL = 510Ω, CL = 50pF If = 13mA, Ta = 25°C NOTE 1 1,9 1 2 5 II—O Propagation Delay Time To High Output Level Propagation Delay Time To Low Output Level Delay Time To Low to High Output Level (90%) Delay Time To High to Low Output Level (90%) tPLH tPHL tLH tHL 45 55 100 100 90 40 ns ns ns ns 5 6 TYPICAL CHARACTERISTICS PARAMETER Input Capacitance Input Diode Temperature Coefficient Resistance (Input-Output) Capacitance (Input-Output) Input-Input Insulation Leakage Current Resistance (Input-Input) Capacitance (Input-Input) Output Rise-Fall Time (10-90%) TA = 25°C, VCC = 5V EACH CHANNEL SYMBOL CIN ∆vF∆TA RI-0 CI-O MIN TYP 60 -1.9 10 1.7 12 MAX UNITS pF mV/°C Ω TEST CONDITIONS VF = 0, f = MHz IF = 20mA VI—O = 500V f = 1MHz Relative Humidity = 45% VI-I = 500V, t = 5s VI-I = 500V f = 1MHz RL = 510Ω, CL = 50pF IF = 13mA VCM = 10V (peak), VO (min) = 2V, RL = 510Ω, IF = OmA VCM = 10V (peak), VO (max) = 0.8V, RL = 510Ω, IF = 10mA NOTE 1 1 3 3 4 4 4 pF nA Ω II-I RI-I CI-I tf, tf CMH 1000 0.5 10 0.80 35 10000 12 pF 90 ns V/µs Common Mode Transient Immunity at High Output Level Common Mode Transient Immunity at Low Output Level 7 CML 1000 10000 V/µs 8 NOTES: 1. Each channel 2. Measured between pins 1 through 8 shorted together and pins 9 through 16 shorted together. 3. Measured between pins 9 and 10 or 11 and 12 shorted together, and pins 9 through 16 shorted together. 4. Measured between pins 9 and 10 shorted together, and pins 11 and 12 shorted together. 5. The tplh propagation delay is measured from the 6.5mA point on the trailing edge of the input pulse to the 1.5V point on the trailing edge of the output pulse. 6. The tphl propagation delay is measured from the 6.5mA point on the leading edge of the input pulse to the 1.5V point on the leading edge of the output pulse. 7. CMh is the max. tolerable common mode transient to assure that the output will remain in a high logic state (i.e. Vo >2.0V). 8. CMl is the max. tolerable common mode transient to assure that the output will remain in a low logic state (i.e. Vo < 0.8V). 9. It is essential that a bypass capacitor (.01 to 0.1µF ceramic) be connected from pin 10 to pin 15. RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current, Low Level Each Channel Input Current, High Level Each Channel Supply Voltage PART NUMBER 66013-000 66013-001 66013-002 66013-003 SYMBOL IFL IFH VC MIN 0 12.5 4.5 MAX 250 20 5.5 UNITS µA mA V SELECTION GUIDE PART DESCRIPTION Dual Channel Optocoupler with 100% device screening DSCC Dwg 8102801EX Dual Channel Optocoupler Dual Channel Optocoupler, Commercial, tested over full military temperature range (-55°C to +125°C) Dual Channel Optocoupler, Commercial (0° to 70°C) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 23