66015-102

66015 3N243 3N244 3N245 SINGLE CHANNEL OPTOCOUPLERS (REPLACEMENT FOR TIL 120, TIL 121) Mii OPTOELECTRONIC PRODUCTS DIVISION Features: • • • • • High Reliability Base lead eliminated for improved noise immunity Rugged package Stability over wide temperature 1kV electrical isolation Applications: • • • • • Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66015 contains a gallium arsenide infrared LED optically coupled to a silicon planar phototransistor. The optocoupler is built in a TO-46 Package. The collector of the phototransistor is electrically connected to the case. This optocoupler is capable of transmitting signals between two galvanic sources. The potential difference between transmitter and receiver should not go over the maximum isolation voltage. The internal base connection has been eliminated for improved noise immunity. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage.......................................................................................................................................................1000V Emitter-Collector Voltage.......................................................................................................................................................... 5V Collector-Emitter Voltage (VCEO, IF = 0) ................................................................................................................................... 30V Reverse Input Voltage ............................................................................................................................................................. 2V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ....................................50mA Peak Forward Input Current (Value applies for tw < 1µs, PRR < 300 pps) ............................................................................. 1A Continuous Collector Current ..............................................................................................................................................50mA Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) ...............................300mW Storage Temperature.......................................................................................................................................... -65°C to +150°C Operating Free-Air Temperature Range. ...........................................................................................................-55°C to +125°C Lead Solder Temperature (10 seconds max.) ................................................................................................................... 240°C Notes: 1. Derate linearly to 100°C free-air temperature at the rate of 1.42 mA/°C above 65°C. 2. Derate linearly to 100°C free-air temperature at the rate of 8.57 mW/°C. Package Dimensions Schematic Diagram 0.019 [0.48] 0.016 [0.41] 0.040 [1.02]MAX Ø 4 LEADS GOLD PLATED KOVAR 2 1 3 4 1.00Ø [2.54] SEE NOTE 1 4 3 .230 [5.84] .209 [5.31] .195 [4.95] .178 [4.52] 0.210 [5.33] 170 [4.32] 0.500 [12.70] MIN BOTTOM VIEW 2 1 NOTE 1: THIS DIMENSION IS CONTROLLED AT THE HOUSING SURFACE.. DIMENSIONS ARE IN INCHES [MILLIMETERS] THE COLLECTOR IS IN ELECTRICAL CONTACT WITH THE CASE MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 E-MAIL: optosales@micropac.com www.micropac.com 3-5 66015 3N243 3N244 3N245 SINGLE CHANNEL OPTOCOUPLER ELECTRICAL CHARACTERISTICS INPUT LED TA = 25°C PARAMETER Input Diode Static Forward Voltage 3N243 3N244 3N245 VF VF VF MIN TYP 1.15 1.15 1.15 MAX 1.3 1.3 1.3 UNITS V V V TEST CONDITIONS IF = 10mA OUTPUT TRANSISTOR TA = 25°C PARAMETER Collector-Emitter Breakdown Voltage 3N243 3N244 3N245 3N243 3N244 3N245 SYMBOL V(BR)CEO ID MIN 30 30 30 TYP MAX UNITS V V V TEST CONDITIONS IC = 1mA, IF = 0 Collector-Emitter Dark Current 100 100 100 nA nA nA VCE = 10V, IF = 0mA COUPLED CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER On State Collector Current 3N243 3N244 3N245 3N243 3N244 3N245 3N243 3N244 3N245 3N243 3N244 3N245 3N243 3N244 3N245 SYMBOL IC(ON) MIN 1.5 3.0 6.0 TYP MAX UNITS mA TEST CONDITIONS VCE = 10V, IF = 10mA Collector-Emitter Saturation Voltage VCE(SAT) 0.3 0.3 0.3 1000 1000 1000 10 10 15 10 10 15 V V V V V V µs IF = 20mA, IC = 1.5mA IF = 20mA, IC = 3mA IF = 20mA, IC = 6mA DC Isolation Voltage Vdc Rise Time tr VCC = 10V, IF = 10mA, RL = 100Ω µs Fall Time tf VCC = 10V, IF = 10mA, RL = 100Ω RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current, Low Level Input Current, High Level Supply Voltage SYMBOL IFL IFH VCE MIN 0 10 5 MAX 1 20 10 UNITS µA mA V SELECTION GUIDE PART NUMBER 66015-001 66015-002 66015-003 66015-101 66015-102 66015-103 PART DESCRIPTION Single Channel 3N243 Optocoupler, commercial (0° to70°C) Single Channel 3N244 Optocoupler, commercial (0° to 70°C) Single Channel 3N245 Optocoupler, commercial (0° to 70°C) Single Channel 3N243 Optocoupler, Mil-temp with JTX screening Single Channel 3N244 Optocoupler, Mil-temp with JTX screening Single Channel 3N245 Optocoupler, Mil-temp with JTX screening MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 E-MAIL: optosales@micropac.com www.micropac.com 3-6