66079-005H

66079 OPTICALLY COUPLED DIGITAL FILTER Mii OPTOELECTRONIC PRODUCTS DIVISION Features: • • • • • DSCC Approved 916761HXX 10 MBd typical Meets Tempest EMI/RFI emanation criteria TTL compatible input and output RFI Rejection 80dB to 1GHz Faraday shield to provide high common mode rejection Applications: • • • • • Military and space Secure communication systems Isolated receiver input Microprocessor system interface Digital isolation for A/D, D/A converters • DESCRIPTION The 66079 Optically Coupled Digital Filter consists of an LED optically coupled to a high speed, high gain inverting detector gate. Maximum isolation can be achieved while providing a TTL output capable of switching with propagation delays of 55nS typical. The 66079 is a hermetically sealed package which is threaded in order to provide convenient bulkhead mounting and is available in standard and screened versions or tested to customer specifications. The 66079-001 is a hermetically sealed package which can be soldered or press-fit mounted and is also available in standard and MIL-PRF-38534 screened versions or tested to customer specifications. ABSOLUTE MAXIMUM RATINGS Storage Temperature............................................................................................................................................. -65°C to +150°C Operating Free-Air Temperature Range ............................................................................................................... -55°C to +125°C Lead Solder Temperature........................................................................................... 260°C for 10s (1.6mm below seating plane) Peak Forward Input Current ..........................................................................................................................40mA (1ms duration) Forward Input Current Continuous ........................................................................................................................................ 20mA Supply voltage - VCC .................................................................................................................................. 7V(1 minute maximum) Output Current - IO ................................................................................................................................................................. 25mA Output Power Dissipation ...................................................................................................................................................... 40mW Output Voltage - VO .....................................................................................................................................................................7V Total Power Dissipation ...................................................................................................................................................... 175mW Package Dimensions N.C. 0.229 [5.817] 0.221 [5.613] 0.562 [14.283] 0.532 [13.521] CATHODE 0.167 [4.242] 0.137 [3.480] GROUND NC 66079-001 ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] 0.212 [5.385] 0.209 [5.309] ANODE 0.100 ± .005 [2.540] Ø Schematic Diagram V OUT Ø 0.019 [0.483] 0.016 [0.406] .100 ± .005 Vcc 0.560 [14.215] 0.500 [12.691] A VCC OUT 1.230 [31.231] 0.312 ±.005 [7.935] V OUT Ø 0.019 [0.483] 0.016 [0.406] Vcc 0.560 [14.215] 0.500 [12.691] 0.015 [0.381] MAX 0.100Ø ±.005 CATHODE 0.312 ±.005 [7.935] RED POINT N.C. 0.100Ø ±.005 THREADS ARE .250± .010 40 ± 0.1 TURNS PER INCH ANODE K GND CASE NOTE: A.01 TO 0.1 F BYPASS CAPACITOR MUST BE CONNECTED BETWEEN Vcc AND GROUND. RED POINT GROUND N.C. 0.463 [11.760] 0.453 [11.506] 66079-000 ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 E-MAIL: optosales@micropac.com www.micropac.com 3 - 38 66079 ELECTRICAL CHARACTERISTICS PARAMETER High Level Output Current Low Level Output Voltage High Level Supply Current Low Level Supply Current Input Forward Voltage Input Reverse Breakdown Voltage Input-Output Insulation Leakage Current Propagation Delay Time To High Output Level Propagation Delay Time To Low Output Level tPHL ° OPTICALLY COUPLED DIGITAL FILTER Ta = -55°C to +125°C unless otherwise specified. MIN TYP 5 0.5 10 20 1.5 5 1.0 SYMBOL IOH VOL ICCH ICCL VF BVR II—O MAX 250 0.6 20 30 1.75 UNITS µA V mA mA V V µA TEST CONDITIONS VCC = 5.5V, VO = 5.5V, IF = 250µA VCC = 5.5V, IF = 10mA IOL (Sinking) = 10mA VCC = 5.5V, IF = 0 (Both Channels) VCC = 5.5V, IF = 20mA (Both Channels) IF = 20mA IR = 10µA VI—0 = 1500Vdc, Relative Humidity = 45% Ta = 25°C, t = 5s NOTE tPLH 65 55 100 100 ns ns RL = 510Ω, CL = 15pF. If = 13mA, ta = 25°C RL = 510Ω, CL = 15pF If = 13mA, ta = 25°C TYPICAL CHARACTERISTICS Ta = 25 C, VCC = 5V EACH CHANNEL PARAMETER SYMBOL MIN TYP MAX Input Capacitance Input to Case Capacitance Input Diode Temperature Coefficient Capacitance (Input-Output) Output Rise-Fall Time (10-90%) Common Mode Transient Immunity at High Output Level Common Mode Transient Immunity at Low Output Level CML 1000 10000 CIN CIC ∆vF UNITS pF mV/°C pF ns V/µs TEST CONDITIONS VF = 0, f = MHz VF = 0, f = MHz IF = 20mA f = 1MHz RL = 510Ω, CL = 50pF IF = 13mA VCM = 10V (peak), VO (min) = 2V, RL = 510Ω, IF = OmA NOTE 60 2 -1.9 1 35 1000 10000 3 5 CI-O tf, tf CMH 1 V/µs VCM = 10V (peak), VO (max) = 0.8V, 2 RL = 510Ω, IF = 1OmA NOTES: 1. CMh is the max. tolerable common mode transient to assure that the output will remain in a high logic state (i.e. VO >2.0V). 2. CMl is the max. tolerable common mode transient to assure that the output will remain in a low logic state (i.e. VO< 0.8V). RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current, Low Level Each Channel Input Current, High Level Each Channel Supply Voltage Fan Out (TTL Load) Each Channel Operating Temperature PART NUMBER 66079-000 66079-000C 66079-001 66079-001C 66079-002 66079-003 66079-004 66079-004H 66079-005 66079-005H SYMBOL IFL IFH VC N TA -55 MIN 0 12.5 4.5 MAX 250 20 5.5 6 125 ° UNITS µA mA V C SELECTION GUIDE PART DESCRIPTION With housing, with 100% screening DSCC Drawing # 5962-916761HXX , with housing Without housing, with 100% screening DSCC Drawing #5962-916760HXX (without housing) With housing, commercial mil-temp (-55°C to +125°C) Without housing, commercial mil-temp (-55°C to +125°C) Without housing, commercial extended temp (-40°C to +80°C) With housing, commercial extended temp (-40°C to +80°C) Without housing, commercial temp (0°C to +70°C) With housing, commercial temp (0°C to +70°C) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 E-MAIL: optosales@micropac.com www.micropac.com 3 - 39