66133-102

66133 REVISION A 3N261 3N262 3N263 9/15/00 SINGLE CHANNEL OPTOCOUPLERS (REPLACEMENT FOR TIL 120) Mii OPTOELECTRONIC PRODUCTS DIVISION Features: • • • • • Electrically similar to 4N47, 4N48, 4N49 Base lead eliminated for improved noise immunity Rugged package +1kV electrical isolation Stability over wide temperature range Applications: • • • • • Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66133 single channel optocoupler consists of a Gallium Arsenide infrared LED and a high gain N-P-N silicon phototransistor packaged in a hermetically sealed metal case. The 3N261, 3N262 and 3N263’s can be tested to customer specifications, as well as to MIL-PRF-19500 using Micropac’s extensive in-house test facilities. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage............................................................................................................................................................. 1kV Emitter-Collector Voltage............................................................................................................................................................7V Collector-Emitter Voltage (VCEO, IF = 0) .....................................................................................................................................40V Reverse Input Voltage ...............................................................................................................................................................2V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ......................................40mA Peak Forward Input Current (Value applies for tw < 1µs, PRR < 300 pps) ...............................................................................1A Continuous Collector Current ................................................................................................................................................20mA Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) .................................275mW Storage Temperature........................................................................................................................................... -65°C to +150°C Operating Free-Air Temperature Range. ............................................................................................................ -55°C to +100°C Lead Solder Temperature (10 seconds max.) ..................................................................................................................... 240°C Notes: 1. Derate linearly to 100°C free-air temperature at the rate of 1.14 mA/°C above 65°C. 2. Derate linearly to 100°C free-air temperature at the rate of 7.8 mW/°C above 65°C. Package Dimensions Schematic Diagram 0.019 [0.48] 0.016 [0.41] .230 [5.84] .209 [5.31] .195 [4.95] .178 [4.52] 0.040 [1.02]MAX 2 1 Ø 4 LEADS GOLD PLATED KOVAR 4 3 4 1.00Ø [2.54] SEE NOTE 1 3 0.210 [5.33] 170 [4.32] 0.500 [12.70] MIN BOTTOM VIEW 2 1 NOTE 1: THIS DIMENSION IS CONTROLLED AT THE HOUSING SURFACE. DIMENSIONS ARE IN INCHES [MILLIMETERS] THE COLLECTOR IS IN ELECTRICAL CONTACT WITH THE CASE MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3-3 66133 REVISION A TA = 25°C 3N261 3N262 3N263 9/15/00 SINGLE CHANNEL OPTOCOUPLERS, SIMILAR TO 4N47/4N48/4N49 ELECTRICAL CHARACTERISTICS PARAMETER Input Diode Static Reverse Current 3N261 3N262 3N263 3N261 3N262 3N263 SYMBOL IR MIN TYP MAX 100 100 100 UNITS µA TEST CONDITIONS VR = 2V Input Diode Static Forward Voltage VF 0.8 0.8 0.8 1.5 1.5 1.5 V IF = 10mA OUTPUT TRANSISTOR TA = 25°C PARAMETER Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector Dark Current SYMBOL V(BR)CEO V(BR)ECO ID MIN 40 7 TYP MAX UNITS V V TEST CONDITIONS IC = 1mA, IF = 0 IE = 100µA, IF = 0 VCE = 20V, IF = 0mA 100 nA COUPLED CHARACTERISTICS TA = 25°C PARAMETER On State Collector Current On State Collector Current On State Collector Current Collector-Emitter Saturation Voltage 3N261 3N262 3N263 3N261 3N262 3N263 3N261 3N262 3N263 3N261 3N262 3N263 SYMBOL IC(ON) IC(ON) IC(ON) VCE(SAT) VCE(SAT) VCE(SAT) tr tr tr tf tf tf MIN 0.5 1 2 TYP MAX UNITS mA mA mA TEST CONDITIONS VCE = 5V, IF = 1mA VCE = 5V, IF = 1mA VCE = 5V, IF = 1mA IF = 2mA, IC = 0.5mA IF = 2mA, IC = 1mA IF = 2mA, IC = 2mA VCC = 10V, IF = 5mA, RL= 100Ω 0.3 0.3 0.3 10 10 15 10 10 15 20 20 25 20 20 25 V V V µs µs µs µs µs µs Rise Time Fall Time VCC = 10V, IF = 5mA, RL = 100Ω RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current, Low Level Input Current, High Level Supply Voltage SYMBOL IFL IFH VCE MIN 0 10 5 MAX 1 20 10 UNITS µA mA V SELECTION GUIDE PART NUMBER 66133-001 66133-002 66133-003 66133-101 66133-102 66133-103 PART DESCRIPTION 3N261, Single Channel Optocoupler, Commercial 3N262, Single Channel Optocoupler, Commercial 3N263, Single Channel Optocoupler, Commercial 3N261, Single Channel Optocoupler with JTX screening 3N262, Single Channel Optocoupler with JTX screening 3N263, Single Channel Optocoupler with JTX screening MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3-4