66156

SINGLE CHANNEL OPTOCOUPLER 66156 PHOTODIODE OUTPUT COAXIAL OR BULKHEAD MOUNT PACKAGES Mii OPTOELECTRONIC PRODUCTS DIVISION Features: • • • • • High Reliability Bulkhead or Press fit version Rugged package Stabile over wide temperature +1.0kIV electrical isolation Applications: • • • • • Analog isolation Secure telecom Line receiver Medical Monitor motor control voltage DESCRIPTION The 66156 contains a Gallium Aluminum Arsenide (GaAIAs) infrared LED optically coupled to a silicon photodiode. This 66156-20X is a hermetically sealed package which is threaded in order to provide convenient bulkhead mounting and is available in standard and screened versions or tested to customer specifications. The 66156-10X is a hermetically sealed coaxial package which can be soldered or press-fit mounted and is also available in the same versions. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage........................................................................................................................................................ 1.0kV Reverse LED Input Voltage ...................................................................................................................................................... 3V Peak Forward Input Current ≤ 1mS (LED, continuous) ....................................................................................................100mA Continuous Transistor Power Dissipation at (or below) 25ºC Free-Air Temperature (see Note 2) ................................300mW Average Forward Input Current ..........................................................................................................................................50mA Reverse Current (LED) .......................................................................................................................................................100µA Reverse Voltage (Detector, 1 min. max) ................................................................................................................................ 40V Total Output Power Dissipation ........................................................................................................................................100mW Storage Temperature..........................................................................................................................................-65°C to +150°C Operating Free-Air Temperature Range ..............................................................................................................-40°C to +85°C Lead Solder Temperature (10 seconds max.) ................................................................................................................... 260°C Notes: 1. Derate linearly to 125°C free-air temperature at the rate of 0.68 mA/°C above 65°C. 2. Derate linearly to 125°C free-air temperature at the rate of 3 mW/°C. Package Dimensions Schematic Diagram CASE GND RED DOT PHOTODIODE A K CATHODE ANODE ANODE WHITE DOT CATHODE K A MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 42 66156 ELECTRICAL CHARACTERISTICS TA = 25°C Unless otherwise specified SINGLE CHANNEL OPTOCOUPLERS PARAMETER Input Diode Static Forward Voltage Reverse Breakdown Voltage Input Diode Capacitance SYMBOL VF BVR CIN MIN 3 TYP MAX 2.2 UNITS V V TEST CONDITIONS IF = 50mA IR = 100µA V = 0V, f = 1MHz 25 pF OUTPUT TRANSISTOR TA = 25°C Unless otherwise specified PARAMETER Dark Current Reverse Breakdown Voltage SYMBOL ID BVR MIN 30 TYP MAX UNITS 100µA V TEST CONDITIONS VR = 5V, RL = 1MΩ IR = 100µA COUPLED CHARACTERISTICS TA = 25°C Unless otherwise specified PARAMETER Output Voltage Rise Time Fall Time SYMBOL VO tr tf MIN 1.5 TYP MAX 200 200 UNITS VP-P nS nS TEST CONDITIONS IF = 75Ma, RL = 3.3kΩ IF = 75Ma, RL = 3.3kΩ IF = 75Ma, RL = 3.3kΩ RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current, Low Level Input Current, High Level Supply Voltage Operating Temperature SYMBOL IFL IFH VCE TA MIN 0 50 5 -40 MAX 100 100 10 +85 UNITS µA mA V ºC SELECTION GUIDE PART NUMBER 66156-103 66156-104 66156-203 66156-204 PART DESCRIPTION Single Channel, (0 to 70ºC) operating range. Press-fit, coaxial package Single Channel, (-40 to 85ºC) operating range. Press-fit, coaxial package Single Channel, (0 to 70ºC) operating range. Bulkhead mount package Single Channel, (-40 to 85ºC) operating range. Bulkhead mount package MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 43