66163-101

66163 REVISION C SINGLE CHANNEL OPTOCOUPLERS DIRECT REPLACEMENT FOR 3C91C Mii OPTOELECTRONIC PRODUCTS DIVISION 12/29/00 Features: • • • • • High Reliability Base lead eliminated for improved noise immunity Rugged package Stability over wide temperature +500V electrical isolation Applications: • • • • • Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66163 contains a gallium arsenide infrared LED optically coupled to a silicon planar phototransistor. The optocoupler is built on a TO-46 header. The collector of the phototransistor is electrically connected to the case. This optocoupler is capable of transmitting signals between two galvanic sources. The potential difference between transmitter and receiver should not go over the maximum isolation voltage. The internal base connection has been eliminated for improved noise immunity. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage...........................................................................................................................................................500V Emitter-Collector Voltage............................................................................................................................................................5V Collector-Emitter Voltage (Value applies to emitter-base open-circuited & the input-diode equal to zero) ............................60V Reverse Input Voltage ...............................................................................................................................................................7V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) .....................................50mA Peak Forward Input Current (Value applies for tw < 1µs, PRR < 300 pps) .......................................................................500mA Continuous Collector Current ................................................................................................................................................50mA Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) .................................230mW Storage Temperature.......................................................................................................................................... -65°C to +150°C Operating Free-Air Temperature Range ............................................................................................................. -55°C to +125°C Lead Solder Temperature (10 seconds max.) .................................................................................................................... 260°C Notes: 1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C. 2. Derate linearly to 125°C free-air temperature at the rate of 2.3 mW/°C. Package Dimensions Schematic Diagram 4 LEADS 0.019Ø (0.48) 0.016Ø (0.41) 0.230Ø (5.84) 0.209Ø (5.31) EMITTER COLLECTOR 2 3 Ø0.100[2.54] ANODE 0.195Ø (4.95) 0.178Ø (4.52) 4 1 0.048 [1.22] 0.028 [0.71] 45° CATHODE 0.030 (0.76) MAX 0.210 [5.34] 0.170 [4.32] 0.50 [12.70] MIN 0.046 [1.17] 0.036 [0.91] DIMENSIONS ARE IN INCHES (MILLIMETERS) NOTE: ANODE ELECTRICALLY CONNECTED TO CASE MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 44 66163 REVISION C 12/29/00 SINGLE CHANNEL OPTOCOUPLER (Direct Replacement for 3C91C) ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER Input Diode Static Reverse Current Input Diode Static Forward Voltage Input Diode Static Forward Voltage Reverse Breakdown Voltage Input Diode Capacitance SYMBOL IR VF VF BVR CIN MIN TYP MAX 1 UNITS µA V V V pF TEST CONDITIONS VR = 3V IF = 2mA IF = 50mA IR = 100µA V = 0V, f = 1MHz 1.15 1.3 7 12 25 1.2 1.5 OUTPUT TRANSISTOR TA = 25°C unless otherwise specified. PARAMETER Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Emitter Dark Current SYMBOL V(BR)CEO V(BR)ECO ICEO1 ICEO2 MIN 50 7 TYP MAX UNITS V V TEST CONDITIONS IC = 1mA, IB = 0, IF = 0 IC = 0mA, IE = 10µA, IF = 0 VCE = 50V, IF = 0mA VCE = 5V, IF = 0mA 60 10 nA nA COUPLED CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER On State Collector Current On State Collector Current On State Collector Current On State Collector Current Collector-Emitter Saturation Voltage Isolation Resistance Input to Output Capacitance Delay Time Storage Time Rise Time Fall Time -55°C -X07 -107 SYMBOL IC(ON) IC(ON) IC(ON) IC(ON) VCE(SAT) RISO CIO td ts tr tf MIN 4 3 2 20 TYP MAX 20 UNITS mA mA mA mA TEST CONDITIONS VCE = 5V, IF = 10mA VCE = 0.4V, IF = 10mA VCE = 5V, IF = 10mA VCE = 5V, IF = 10mA IF = 50mA, IC = 10mA VIN-OUT = 500V f = 1MHz VCE = 5V, IF = 2mA, RL = 100Ω VCE = 5V, IF = 2mA, RL = 100Ω VCE = 5V, IF = 2mA, RL = 100Ω VCE = 5V, IF = 2mA, RL = 100Ω 0.4 10 9 V Ω 2 2 0.2 3 4 2.5 4 0.5 5 5 pF µs µs µs µs RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current, Low Level Input Current, High Level Supply Voltage Operating Temperature PART NUMBER 66163-001 66163-011 66163-101 66163-017 66163-107 SYMBOL IFL IFH VCE TA MIN 0 2 5 -55 MAX 1 10 50 125 UNITS µA mA V °C SELECTION GUIDE PART DESCRIPTION Single Channel optocoupler, commercial (0° to 70°C) Single Channel optocoupler full military operating temperature range Single Channel optocoupler tested over full military temperature range with 100% device screening Single Channel optocoupler full military operating temperature range w/200% CTR Single Channel optocoupler tested over full military temperature range with 100% device screening w/200% CTR MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918 www.micropac.com E-MAIL: optosales@micropac.com 3 - 45