66164-001

66164 REVISION A SINGLE CHANNEL LINEAR OPTOCOUPLER Electrically Similar to 3C92C Mii OPTOELECTRONIC PRODUCTS DIVISION 8/30/00 Features: • • • • • High Reliability Base lead eliminated for improved noise immunity Rugged package Stability over wide temperature +500V electrical isolation Applications: • • • • • Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66164 contains a gallium arsenide infrared LED optically coupled to a silicon planar phototransistor. The optocoupler is built on a TO-46 header. The collector of the phototransistor is electrically connected to the case. This optocoupler is capable of transmitting signals between two galvanic sources. The potential difference between transmitter and receiver should not go over the maximum isolation voltage. The internal base connection has been eliminated for improved noise immunity. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage....................................................................................................................................................... 500V Emitter-Collector Voltage........................................................................................................................................................ 5V Collector-Emitter Voltage (value applies to emitter-base open-circuited & the input-diode equal to zero) ........................ 60V Reverse Input Voltage ........................................................................................................................................................... 7V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 1) ................................. 50mA Peak Forward Input Current (value applies for tw < 1µs, PRR < 300 pps) .....................................................................500mA Continuous Collector Current ............................................................................................................................................ 50mA Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 2) .............................. 300mW Storage Temperature........................................................................................................................................-65°C to +150°C Operating Free-Air Temperature Range ..........................................................................................................-55°C to +100°C Lead Solder Temperature (10 seconds max.) ................................................................................................................ 240°C Notes: 1. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C. 2. Derate linearly to 125°C free-air temperature at the rate of 3 mW/°C. Package Dimensions Schematic Diagram 4 LEADS 0.019Ø (0.48) 0.016Ø (0.41) 0.230Ø (5.84) 0.209Ø (5.31) COLLECTOR EMITTER 2 3 Ø0.100[2.54] ANODE 0.195Ø (4.95) 0.178Ø (4.52) 4 1 0.048 [1.22] 0.028 [0.71] 45° CATHODE 0.030 (0.76) MAX 0.210 [5.34] 0.170 [4.32] 0.50 [12.70] MIN 0.046 [1.17] 0.036 [0.91] DIMENSIONS ARE IN INCHES (MILLIMETERS) NOTE: ANODE ELECTRICALLY CONNECTED TO CASE 66164 SINGLE CHANNEL OPTOCOUPLER (Electrically similar to 3C92C) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut Str., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 3 - 46 ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER Input Diode Static Reverse Current Input Diode Static Forward Voltage Input Diode Static Forward Voltage Reverse Breakdown Voltage Input Diode Capacitance SYMBOL IR VF VF BVR CIN MIN TYP MAX 1 UNITS µA V V V pF TEST CONDITIONS VR = 3V IF = 2mA IF = 50mA IR = 100µA V = 0V, f = 1MHz 1.15 1.3 7 12 25 1.2 1.5 OUTPUT TRANSISTOR TA = 25°C unless otherwise specified. PARAMETER Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Emitter Dark Current SYMBOL V(BR)CEO V(BR)ECO ICEO1 ICEO2 MIN 50 7 TYP MAX UNITS V V TEST CONDITIONS IC = 1mA, IB = 0, IF = 0 IC =10µA, IE = 10µA, IF = 0 VCE = 50V, IF = 0mA VCE = 5V, IF = 0mA 50 10 nA nA COUPLED CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER On State Collector Current On State Collector Current On State Collector Current Collector-Emitter Saturation Voltage Isolation Resistance Input to Output Capacitance Delay Time Storage Time Rise Time Fall Time -55°C SYMBOL IC(ON) IC(ON) IC(ON) VCE(SAT) RISO CIO td ts tr tf MIN 4 4 4 TYP MAX UNITS mA TEST CONDITIONS VCE = 5V, IF = 10mA VCE = 0.4V, IF = 10mA VCE = 5V, IF = 10mA IF = 50mA, IC = 10mA VIN-OUT = 500V f = 1MHz VCE = 5V, IF = 2mA, RL = 100Ω VCE = 5V, IF = 2mA, RL = 100Ω VCE = 5V, IF = 2mA, RL = 100Ω VCE = 5V, IF = 2mA, RL = 100Ω 10 mA mA 0.4 10 9 V Ω 2 2 0.2 3 4 2.5 4 0.5 5 5 pF µs µs µs µs RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current, Low Level Input Current, High Level Supply Voltage Operating Temperature SYMBOL IFL IFH VCE TA MIN 0 2 5 -55 MAX 1 10 50 125 UNITS µA mA V °C SELECTION GUIDE PART NUMBER 66164-011 66164-101 66164-001 PART DESCRIPTION Single Channel optocoupler, military operating range (-55° to +125°C) Single Channel optocoupler, full mil-temp (-55° to +125°C) with 100% device screening (JTX) Single Channel optocoupler, commercial (0° to 70°C) MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut Str., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 3 - 47