15KPA75AE3/TR13

15KPA17Ae3 – 15KPA280CAe3 Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of lightning strikes, providing circuit protection to several class levels in the IEC61000-4-5 specification. Clamping time is virtually instantaneous. It also provides protection from transients caused by inductive load dumps, induced RFI, and ESD, providing protection to IEC61000-4-2 and -4-4. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • • • • Available in both unidirectional and bidirectional configurations. 5% working voltage tolerance. Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B. RoHS compliant (2002/95/EC), MSL level 1 (J-STD-020). P600 Package APPLICATIONS / BENEFITS • • • Protection from transients caused by lightning strikes, switching transients, RFI, and ESD. Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4. Protection from the secondary effects of lightning per IEC61000-4-5. MAXIMUM RATINGS @ 25 ºC unless otherwise noted Parameters/Test Conditions Junction and Storage Temperature Thermal Resistance, Junction to Lead @ 3/8 inch (10 mm) lead length from body Thermal Resistance, Junction to Ambient (1) Non Repetitive Peak Forward Surge Current Rated Average Power Dissipation @ T L = 75 ºC, (2) (0.375 inch (9.5 mm) from body) Peak Pulse Power Dissipation with a 10/1000 μs waveform (see Figure 1) (3) Peak Pulse Current with a 10/1000 μs waveform Solder Temperature @ 10 s Symbol Value T J and T STG R ӨJL -55 to +175 Unit 8.0 o C/W R ӨJA I FSM P M(AV) 77.5 400 8.0 o C/W A W P PP 15000 W I PP See Electrical Table 260 A o o C C Notes: 1. For Unidirectional devices only. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. Also see Figure 6. 2. Mounted as shown in Figure 5. 3. Non-repetitive current pulse, per Figure 3 and derated above T A = 25ºC per Figure 2. RF01131, Rev. A (6/24/13) ©2013 Microsemi Corporation MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com Page 1 of 7 15KPA17Ae3 – 15KPA280CAe3 MECHANICAL and PACKAGING • • • • • • • CASE: Epoxy body meets UL94V-0. TERMINALS: Matte-tin plating, fully RoHS compliant. Solderable per MIL-STD-750, method 2026. MARKING: Manufacturer ID, date code and part number. POLARITY: For unidirectional types the color band denotes the cathode, which is positive with respect to the anode under normal TVS operation. TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities. WEIGHT: Approximately 0.07 ounce (2.0 grams). See Package Dimensions on last page. PART NOMENCLATURE 15 K P A 17 C A Peak Pulse Power e3 RoHS Compliance Kilowatt Rating 5%Voltage Tolerance Encapsulated Plastic Package Polarity C = Bi-directional Blank = Unidirectional Axial-leaded Device Stand-off Voltage Rating (see Electrical Characteristics table) SYMBOLS & DEFINITIONS Definition Symbol α V(BR) VW M PPP V (BR) ID IPP VC Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in temperature that caused it expressed in %/°C or mV/°C. Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that may be continuously applied over the standard operating temperature. Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The impulse power is the maximum-rated value of the product of I PP and V C . Breakdown Voltage: The voltage across the device at a specified current I (BR) in the breakdown region. Standby Current: The current through the device at rated stand-off voltage. Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives. Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an impulse current (I PP ) for a specified waveform. RF01131, Rev. A (6/24/13) ©2013 Microsemi Corporation Page 2 of 7 15KPA17Ae3 – 15KPA280CAe3 ELECTRICAL CHARACTERISTICS @ 25 ºC DEVICE BREAKDOWN VOLTAGE(2), V(BR) V(BR) @ I (BR) (Volts) TEST CURRENT I (BR) (mA) STANDOFF VOLTAGE VWM (Volts) MAXIMUM STANDBY CURRENT(4) ID @ VWM (µA) MAXIMUM PEAK PULSE CURRENT(3) IPP (A) MAXIMUM CLAMPING VOLTAGE VC @ IPP (Volts) MAXIMUM TEMPERATURE COEFFICIENT αV(BR) (%/ °C) 15KPA17Ae3 / 15KPA17CAe3 Min 18.99 Max 20.79 50 17 5000 515.4 29.3 0.1 15KPA18Ae3 / 15KPA18CAe3 20.11 22.01 50 18 5000 488.7 30.9 0.1 15KPA20Ae3 / 15KPA20CAe3 22.34 24.46 20 20 1500 440.2 34.3 0.1 15KPA22Ae3 / 15KPA22CAe3 24.57 26.91 10 22 500 407.0 37.1 0.1 15KPA24Ae3 / 15KPA24CAe3 26.81 29.35 5 24 150 371.0 40.7 0.1 15KPA26Ae3 / 15KPA26CAe3 29.04 31.80 5 26 50 343.2 44.0 0.1 15KPA28Ae3 / 15KPA28CAe3 31.28 34.24 5 28 25 317.9 47.5 0.1 15KPA30Ae3 / 15KPA30CAe3 33.51 36.70 5 30 15 297.8 50.7 0.1 15KPA33Ae3 / 15KPA33CAe3 36.90 40.40 5 33 2 276.1 54.7 0.1 15KPA36Ae3 / 15KPA36CAe3 40.20 44.00 5 36 2 252.5 59.8 0.1 15KPA40Ae3 / 15KPA40CAe3 44.70 48.90 5 40 2 229.5 65.8 0.1 15KPA43Ae3 / 15KPA43CAe3 48.00 52.60 5 43 2 216.3 69.8 0.1 15KPA45Ae3 / 15KPA45CAe3 50.30 55.00 5 45 2 207.4 72.8 0.1 15KPA48Ae3 / 15KPA48CAe3 53.60 58.70 5 48 2 194.3 77.7 0.1 15KPA51Ae3 / 15KPA51CAe3 57.00 62.40 5 51 2 182.1 82.9 0.1 15KPA54Ae3 / 15KPA54CAe3 60.30 66.00 5 54 2 172.2 87.7 0.1 15KPA58Ae3 / 15KPA58CAe3 64.80 70.90 5 58 2 161.0 93.8 0.1 15KPA60Ae3 / 15KPA60CAe3 67.00 73.40 5 60 2 155.0 97.4 0.1 15KPA64Ae3 / 15KPA64CAe3 71.50 78.30 5 64 2 144.9 104.2 0.1 15KPA70Ae3 / 15KPA70CAe3 78.20 85.60 5 70 2 132.9 113.6 0.1 15KPA75Ae3 / 15KPA75CAe3 83.80 91.70 5 75 2 123.8 122.0 0.1 15KPA78Ae3 / 15KPA78CAe3 87.10 95.40 5 78 2 119.7 126.1 0.1 15KPA85Ae3 / 15KPA85CAe3 94.90 104.00 5 85 2 109.7 137.6 0.1 15KPA90Ae3 / 15KPA90CAe3 100.50 110.10 5 90 2 103.7 145.6 0.1 15KPA100Ae3 / 15KPA100CAe3 111.70 122.30 5 100 2 93.6 161.3 0.1 15KPA110Ae3 / 15KPA110CAe3 122.90 134.50 5 110 2 84.5 178.6 0.1 15KPA120Ae3 / 15KPA120CAe3 134.00 146.80 5 120 2 78.5 192.3 0.1 15KPA130Ae3 / 15KPA130CAe3 145.20 159.00 5 130 2 72.5 208.3 0.1 15KPA150Ae3 / 15KPA150CAe3 167.60 183.50 5 150 2 62.4 241.9 0.1 15KPA160Ae3 / 15KPA160CAe3 178.70 195.70 5 160 2 58.4 258.6 0.1 15KPA170Ae3 / 15KPA170CAe3 189.90 207.90 5 170 2 55.4 272.7 0.1 15KPA180Ae3 / 15KPA180CAe3 201.10 220.10 5 180 2 52.3 288.5 0.1 15KPA200Ae3 / 15KPA200CAe3 223.40 244.60 5 200 2 47.3 319.1 0.1 15KPA220Ae3 / 15KPA220CAe3 245.70 269.10 5 220 2 35.2 356.0 0.1 15KPA240Ae3 / 15KPA240CAe3 268.10 293.50 5 240 2 39.3 384.6 0.1 15KPA260Ae3 / 15KPA260CAe3 290.40 318.00 5 260 2 36.2 416.7 0.1 15KPA280Ae3 / 15KPA280CAe3 312.80 342.40 5 280 2 33.2 454.5 0.1 NOTES: (1) All ratings at 25 ºC unless specified otherwise. (2) V (BR) measured after I (BR) applied for 300 µs, I (BR) = square wave pulse or equivalent. (3) Surge current waveform per Figure 3 and derated per Figure 2. (4) For bidrectional types with V WM of 30 volts and less, the I D limit is doubled. RF01131, Rev. A (6/24/13) ©2013 Microsemi Corporation Page 3 of 7 15KPA17Ae3 – 15KPA280CAe3 PPP – Peak Pulse Power (kW) GRAPHS t d – Pulse Width (sec.) Peak Pulse Power (PPP) or Current (lPP) Derating in Percentage% FIGURE 1 Peak Pulse Power Rating Curve T A Ambient Temperature (°C) FIGURE 2 Pulse Derating Curve RF01131, Rev. A (6/24/13) ©2013 Microsemi Corporation Page 4 of 7 15KPA17Ae3 – 15KPA280CAe3 Pulse Current in Percent of IPP GRAPHS (continued) t – Time – ms Test waveform parameters: tr=10 µs, tp=1000 µs CT, Total Capacitance (pF) FIGURE 3 Pulse Waveform for 10/1000 Exponential Surge V (BR) – Reverse Breakdown Voltage (V) FIGURE 4 Typical Junction Capacitance RF01131, Rev. A (6/24/13) ©2013 Microsemi Corporation Page 5 of 7 15KPA17Ae3 – 15KPA280CAe3 PD Steady State Power Dissipation (W) GRAPHS (continued) T L – Lead Temperature (°C) IFSM Peak Forward Surge Current (A) FIGURE 5 Steady State Power Derating Curve Number of Cycles at 60 Hz FIGURE 6 Maximum Non-repetitive Forward Surge Current (Unidirectional Devices Only) RF01131, Rev. A (6/24/13) ©2013 Microsemi Corporation Page 6 of 7 15KPA17Ae3 – 15KPA280CAe3 PACKAGE DIMENSIONS Dim LL BL BD LD RF01131, Rev. A (6/24/13) ©2013 Microsemi Corporation Dimensions Inch Millimeters Min Max Min Max 0.750 19.05 0.340 0.360 8.645 9.135 0.340 0.360 8.645 9.135 0.047 0.053 1.194 1.346 Page 7 of 7