1N3155A

• 1N3154-1 THRU 1N3157-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS PER MIL-PRF-19500/158 • 8.4 V0LT NOMINAL ZENER VOLTAGE • TEMPERATURE COMPENSATED ZENER REFERENCE DIODES • METALLURGICALLY BONDED 1N3154 thru 1N3157A and 1N3154-1 thru 1N3157A-1 MAXIMUM RATINGS Operating Temperature: -65°C to +175°C Storage Temperature: -65°C to +175°C DC Power Dissipation: 500mW @ +50°C Power Derating: 4 mW / °C above +50°C REVERSE LEAKAGE CURRENT lR = 10µ A @ 25°C & VR = 5.5Vdc ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise speci½ed. JEDEC TYPE NUMBER ZENER VOLTAGE vz @ I ZT ZENER TEST CURRENT I ZT MAXIMUM VOLTAGE TEMPERATURE ZENER TEMPERATURE RANGE IMPEDANCE STABILITY ZZT ³V ZT MAXIMUM (Note 1) (Note 2) mV 130 172 65 86 26 34 13 17 °C -55 to +100 -55 to +150 -55 to +100 -55 to +150 -55 to +100 -55 to +150 -55 to +100 -55 to +150 EFFECTIVE TEMPERATURE COEFFICIENT FIGURE 1 % / °C .01 .01 .005 .005 .002 .002 .001 .001 VOLTS 1N3154 1N3154A 1N3155 1N3155A 1N3156 1N3156A 1N3157 1N3157A 8.00—8.80 8.00—8.80 8.00—8.80 8.00—8.80 8.00—8.80 8.00—8.80 8.00—8.80 8.00—8.80 mA 10 10 10 10 10 10 10 10 OHMS 15 15 15 15 15 15 15 15 DESIGN DATA CASE: Hermetically sealed glass case. DO – 35 outline. LEAD MATERIAL: Copper clad steel. LEAD FINISH: Tin / Lead POLARITY: Diode to be operated with the banded (cathode) end positive. NOTE 1 Zener impedance is derived by superimposing on lZT A 60Hz rms a.c. current equal to 10% of lZT. The maximum allowable change observed over the entire temperature range i.e., the diode voltage will not exceed the speci½ed mV at any discrete temperature between the established limits, per JEDEC standard No.5. MOUNTING POSITION: ANY. NOTE 2 6 L AKE STREET, LAWRENCE, MASSACHUSETTS 01841 PHONE (978) 620-2600 FAX (978) 689-0803 WEBSITE: http://www.microsemi.com 27 1N3154 Pd, Rated Power Dissipation (mW) thru 1N3157A INCLUDING -1 VERSIONS 600 500 400 300 200 100 0 0 25 50 75 100 125 150 175 100 50 ZENER IMPEDANCE ZZT (OHMS) TL, Lead temperature (C°) 3/8” from body FIGURE 2 POWER DERATING CURVE 10 5 1 8 9 10 11 12 13 OPERATING CURRENT lZT (mA) FIGURE 3 ZENER IMPEDANCE VS. OPERATING CURRENT CHANGE IN TEMPERATURE COEFFICIENT ( %/°C) +.0015 +.0010 +.0005 0 -.0005 -.0010 -.0015 6 8 10 OPERATING CURRENT lZT (mA) 12 14 FIGURE 4 TYPICAL CHANGE OF TEMPERATURE COEFFICIENT WITH CHANGE IN OPERATING CURRENT 28