1PMT4622/TR13

1PMT4614e3 – 1PMT4627e3, 1PMT4099e3 – 1PMT4135e3 Powermite Low Noise 1 Watt Zener Diodes Compliant DESCRIPTION This Microsemi Powermite surface mount low noise Zener package series provides a higher power handling capability that are also RoHS compliant. In addition to its size advantages, Powermite package features include a full-metallic bottom that eliminates the possibility of solder flux entrapment during assembly, and a unique locking tab acts as an efficient heat path from die to mounting plane for external heat sinking with very low thermal resistance junction to case (bottom). Its innovative design makes this device ideal for use with automatic insertion equipment. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES • • • • • • • Surface mount equivalent to JEDEC registered 1N4099 through 1N4135 and 1N4614 through 1N4627 series except with additional power capability. Extensive selection from 1.8 to 100 volts. Regulates voltage over a broad operating current and temperature range. Low R ӨJC for cooler operation and better voltage regulation. Low noise density (1-3 kHz) at test current. Low reverse leakage current. RoHS compliant by design. Also available in: DO-35 package (axial-leaded) 1N4099 – 1N4135 and 1N4614 – 1N4627 DO-213AA package APPLICATIONS / BENEFITS • • • • • DO-216 Package (surface mount) 1N4099UR – 1N4135UR and 1N4614UR – 1N4627UR Tight tolerances available in plus or minus 2%. Moisture classification Level 1 per IPC/JEDEC J-STD-020B with no dry pack required. Non-sensitive to ESD per MIL-STD-750 method 1020. Compatible with automatic insertion equipment. Full metallic bottom eliminates flux entrapment. MAXIMUM RATINGS Parameters/Test Conditions Junction and Storage Temperature (1) Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-Case (2) Steady-State Power Dissipation Forward Voltage @ 200 mA Solder Temperature @ 10 s Notes: 1. 2. Symbol Value TJ and TSTG R ӨJA R ӨJC PD VF TSP -55 to +150 240 30 1.0 1.1 260 Unit o C C/W o C/W W V o C o On FR4 PC board (1 oz copper) with recommended footprint (see last page). At T C < 120 oC where T C is case bottom temperature at mounting plane, or 0.5 watts at T A = 30 ºC (ambient temperature) when mounted on FR4 PC board as described for R ӨJA (also see power deratings in figure 2). MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com RF01097, Rev. A (2/21/13) ©2013 Microsemi Corporation Page 1 of 5 1PMT4614e3 – 1PMT4627e3, 1PMT4099e3 – 1PMT4135e3 MECHANICAL and PACKAGING • • • • • • • CASE: Void-free transfer molded thermosetting epoxy compound meeting UL94V-0. FINISH: Annealed matte-tin plating over copper and readily solderable per MIL-STD-750 method 2026. (Consult factory for tinlead plating. NOTE: Tin-lead plated product is not RoHS compliant.) POLARITY: Cathode designated by Tab 1 (bottom). TAPE AND REEL option: Standard per EIA-481-B (consult factory for quantities). MARKING: Three numerical digits of P/N and a dot (see electrical characteristics). WEIGHT: Approximately 0.016 grams. See package dimensions on last page. PART NOMENCLATURE 1 PMT 4099 C e3 1 Watt RoHS Compliance Powermite Class Zener Voltage Tolerance Blank = 5% C = 2% JEDEC type number (See Electrical Characteristics table) SYMBOLS & DEFINITIONS Definition Symbol IR I Z, I ZT, I ZK I ZM ND VR VZ Z ZT or Z ZK Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Regulator Current: The dc regulator current (I Z), at a specified test point (I ZT), near breakdown knee (I ZK ). Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating. Noise Density: The noise generated over a specified frequency bandwidth usually specified in terms of mV/ √Hz. Reverse Voltage: The reverse voltage dc value, no alternating component. Zener Voltage: The Zener voltage the device will exhibit at a specified current (I Z) in its breakdown region. Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a specified rms current modulation (typically 10% of I ZT or I ZK ) and superimposed on I ZT or I ZK respectively. RF01097, Rev. A (2/21/13) ©2013 Microsemi Corporation Page 2 of 5 1PMT4614e3 – 1PMT4627e3, 1PMT4099e3 – 1PMT4135e3 ELECTRICAL CHARACTERISTICS @ 25 °C unless otherwise stated PART NUMBER (Note 4) 1PMT4614 1PMT4615 1PMT4616 1PMT4617 1PMT4618 1PMT4619 1PMT4620 1PMT4621 1PMT4622 1PMT4623 1PMT4624 1PMT4625 1PMT4626 1PMT4627 1PMT4099 1PMT4100 1PMT4101 1PMT4102 1PMT4103 1PMT4104 1PMT4105 1PMT4106 1PMT4107 1PMT4108 1PMT4109 1PMT4110 1PMT4111 1PMT4112 1PMT4113 1PMT4114 1PMT4115 1PMT4116 1PMT4117 1PMT4118 1PMT4119 1PMT4120 1PMT4121 1PMT4122 1PMT4123 1PMT4124 1PMT4125 1PMT4126 1PMT4127 1PMT4128 1PMT4129 1PMT4130 1PMT4131 1PMT4132 1PMT4133 1PMT4134 1PMT4135 NOMINAL ZENER VOLTAGE DEVICE (Note 1) MARKING V Z @ I ZT 614• 615• 616• 617• 618• 619• 620• 621• 622• 623• 624• 625• 626• 627• 099• 100• 101• 102• 103• 104• 105• 106• 107• 108• 109• 110• 111• 112• 113• 114• 115• 116• 117• 118• 119• 120• 121• 122• 123• 124• 125• 126• 127• 128• 129• 130• 131• 132• 133• 134• 135• I ZT MAXIMUM ZENER IMPEDANCE (Note 2) Z ZT Volts µA Ohms µA Volts µV/√HZ mA MAXIMUM TEMPERATURE COEFFICIENT OF ZENER VOLTAGE α VZ %/°C 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 8.7 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 25 27 28 30 33 36 39 43 47 51 56 60 62 68 75 82 87 91 100 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 1200 1250 1300 1400 1500 1600 1650 1700 1650 1650 1600 1500 1400 1200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 150 150 150 150 150 150 200 200 200 200 200 250 250 300 300 400 500 700 700 800 1000 1200 1500 10 5.0 4.0 2.0 1.0 0.8 7.5 7.5 5.0 4.0 10 10 10 10 10 10 1 1 1 1 .05 .05 .05 .05 .05 .05 .05 .05 .05 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 .01 1.0 1.0 1.0 1.0 1.0 1.0 1.5 2.0 2.0 2.0 3.0 3.0 4.0 5.0 5.17 5.70 6.24 6.61 6.92 7.60 8.44 9.12 9.87 10.65 11.40 12.15 12.92 13.37 14.44 15.20 16.72 18.25 19.00 20.45 21.28 22.80 25.08 27.38 29.65 32.65 35.75 38.76 42.60 45.60 47.10 51.68 57.00 62.32 66.12 69.16 76.00 1 1 1 1 1 1 1 1 1 1 1 2 4 5 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 262.4 240.6 218.7 207.8 196.8 190.3 185.9 181.5 174.9 168.4 164.0 153.1 142.2 133.4 122.5 111.5 100.6 96.2 91.9 83.1 76.5 69.9 63.4 59.0 54.8 52.5 48.1 45.9 43.7 41.6 37.2 34.9 32.8 30.6 30.6 28.4 26.2 24.0 21.4 19.5 17.7 16.4 14.7 13.9 13.3 12.2 11.2 10.1 9.6 9.2 8.3 -0.075 -0.075 -0.075 -0.075 -0.075 -0.075 -0.075 -0.065 -0.060 -0.050 -0.040 +0.020 -0.045 +0.030 -0.020 +0.040 -0.010 +0.050 0.040 0.045 0.048 0.049 0.050 0.055 0.060 0.065 0.065 0.070 0.070 0.070 0.075 0.075 0.075 0.075 0.080 0.080 0.080 0.085 0.085 0.085 0.085 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.095 0.095 0.095 0.095 0.095 0.095 ZENER TEST CURRENT MAXIMUM REVERSE CURRENT MAXIMUM NOISE DENSITY IR @ V R N D @ I ZT MAXIMUM ZENER CURRENT (Note 3) I ZM NOTE 1: Product shown has a standard tolerance of ± 5% on the nominal Zener voltage. V Z is measured at I ZT with Tc (TAB 1) at 30 °C. NOTE 2: Zener impedance is derived by superimposing on I ZT a 60 Hz rms ac current equal to 10% of I ZT (25 µA ac). NOTE 3: Based on 1 W maximum power dissipation before any derating. Allowance has been made for higher voltage with operation at higher currents and temperature. For determination of voltage change with current deviations from I ZT see MicroNote 202. RF01097, Rev. A (2/21/13) ©2013 Microsemi Corporation Page 3 of 5 1PMT4614e3 – 1PMT4627e3, 1PMT4099e3 – 1PMT4135e3 PD Rated Power Dissipation (mW) GRAPHS Temperature (oC) FIGURE 2 - Power Derating Curve Where TC is case (bottom) temperature and TA is Ambient Temperature on FR4 PC board. FIGURE 1 – Noise Density Measurement Circuit Typical Capacitance in Picofarads (pF) Noise density, (N D ) is specified in microvolt-rms per square-root-hertz. Actual measurement is performed using a 1 kHz to 3 kHz frequency bandpass filter at a o constant Zener test current (I ZT ) at 25 C ambient temperature. N D is calculated from the formula. Zener Voltage V Z FIGURE 3 – Capacitance vs. Zener Voltage (Typical) RF01097, Rev. A (2/21/13) ©2013 Microsemi Corporation Page 4 of 5 1PMT4614e3 – 1PMT4627e3, 1PMT4099e3 – 1PMT4135e3 PACKAGE DIMENSIONS Ltr A B C D E F G H J K Dimensions Inch Millimeters Min Max Min Max 0.029 0.039 0.73 0.99 0.016 0.026 0.40 0.66 0.070 0.080 1.77 2.03 0.087 0.097 2.21 2.46 0.020 0.030 0.50 0.76 0.051 0.061 1.29 1.54 0.021 0.031 0.53 0.78 0.004 0.008 0.10 0.20 0.070 0.080 1.77 2.03 0.035 0.045 0.89 1.14 PAD LAYOUT Ltr A B C D E RF01097, Rev. A (2/21/13) ©2013 Microsemi Corporation Dimensions Inch Millimeters 0.100 2.54 0.105 2.67 0.050 1.27 0.030 0.76 0.025 0.64 Page 5 of 5