1PMT5925B

POWERMITE® 8700 E. Thomas Road Scottsdale, AZ 85251 Tel: (480) 941-6300 Fax: (480) 947-1503 3.0 WATT Zener Diodes 1PMT5913B thru 1PMT5956B DESCRIPTION In Microsemi's Powermite surface mount package, these zener diodes provide power-handling capabilities (3.0 WATTS ) found in larger packages. In addition to its size advantages, Powermite package features include a full metallic bottom that eliminates the possibility of solder flux entrapment during assembly, and a unique locking tab acts as an integral heat sink. Its innovative design makes this device ideal for use with automatic insertion equipment. ® ® DO-216 FEATURES • • • • • Surface Mount Packaging Integral Heat Sink Locking Tabs Compatible with automatic insertion equipment Full metallic bottom eliminates flux entrapment Zener voltage 3.3 to 200 Volts Low reverse leakage Tight tolerance available ESD Rating of >16kV per human body model CIRCUIT DIAGRAM MECHANICAL CHARACTERISTICS • • • • • Cathode designated by TAB 1 Mounting position any way Molded package Weight: 0.016 gram (approximate) Thermal resistance 30°C/W junction to TAB1 • • • • • • MAXIMUM RATINGS Junction and storage temperatures: -55° C to +150 °C DC power dissipation: 3.0 watt with TAB 1 6 0°C Forward voltage: @ 200 mA 1.2 volts Packaging • • • • PACKAGING EIA Standard 481 Tape & Reel Tape & Reel EIA Standard 481 7 inch 3,000 pieces 13 inch 12,000 pieces Mechanical Specifications Mounting Pad Dimensions All dimensions +/- .005 inches Inches MSC0995.PDF ISO 9001 CERTIFIED REV F 11/01/99 1PMT5913B thru 1PMT5956B Electrical Characteristics @ T L = 30 ° C ° MICROSEMI NUMBER DEVICE MARKING ZENER VOLTAGE (1) TEST CURRENT DYNAMIC IMPEDANCE (2) KNEE CURRENT KNEE IMPEDANCE REVERSE CURRENT REVERSE VOLTAGE VZ VOLTS IZT mA 113.6 104.2 96.1 87.2 79.8 73.5 66.9 60.5 55.1 50 45.7 41.2 37.5 34.1 31.2 28.8 25 23.4 20.8 18.7 17 15.6 13.9 12.5 11.4 10.4 9.6 8.7 8.0 7.3 6.7 6.0 5.5 5.0 4.6 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.1 1.9 ZZT OHMS 10 9.0 7.5 6.0 5.0 4.0 2.0 2.0 2.5 3.0 3.5 4.0 4.5 5.5 6.5 7.0 9.0 10 12 14 17.5 19 23 28 33 38 45 53 67 70 86 100 120 140 160 200 250 300 380 450 600 700 900 1200 IZK mA 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 ZZK OHMS 500 500 500 500 500 350 250 200 200 400 400 500 500 550 550 550 600 600 650 650 650 700 700 750 800 850 900 950 1000 1100 1300 1500 1700 2000 2500 3000 3100 4000 4500 5000 6000 6500 7000 8000 IR (MAX) µ Adc 100 75 25 5 5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 VR VOLTS 1.0 1.0 1.0 1.0 1.5 2.0 3.0 4.0 5.2 6.0 6.5 7.0 8.0 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.2 56 62.2 69.2 76 83.6 91.2 98.8 114 121.6 136.8 152 MAX ZENER CURRENT (3) IZM mA 749.1 686.4 633.6 547.2 526.4 481.8 432.3 397.7 363.0 330.0 300.3 270.6 247.5 224.4 206.2 189.8 165.0 153.5 68.5 123.8 112.2 102.3 90.8 82.5 74.3 67.7 62.7 56.1 51.2 47.9 42.9 38.6 36.3 33.0 29.7 26.4 24.8 21.5 19.8 18.1 16.5 14.9 13.2 11.6 1PMT5913B 1PMT5914B 1PMT5915B 1PMT5916B 1PMT5917B 1PMT5918B 1PMT5919B 1PMT5920B 1PMT5921B 1PMT5922B 1PMT5923B 1PMT5924B 1PMT5925B 1PMT5926B 1PMT5927B 1PMT5928B 1PMT5929B 1PMT5930B 1PMT5931B 1PMT5932B 1PMT5933B 1PMT5934B 1PMT5935B 1PMT5936B 1PMT5937B 1PMT5938B 1PMT5939B 1PMT5940B 1PMT5941B 1PMT5942B 1PMT5943B 1PMT5944B 1PMT5945B 1PMT5946B 1PMT5947B 1PMT5948B 1PMT5949B 1PMT5950B 1PMT5951B 1PMT5952B 1PMT5953B 1PMT5954B 1PMT5955B 1PMT5956B 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 NOTE 1: Product shown has a standard tolerance of ± 5% on the nominal zener voltage. Also available in 2% and 1% tolerance with suffix C and D respectively. VZ is measured at IZT with Tc (TAB 1) 30°C . Voltage measurement to be performed 20 seconds after application of dc current. NOTE 2: Zener impedance is derived by superimposing on IZT a 60Hz rms ac current equal to 10% of IZT. NOTE 3: Based upon 3 W maximum power dissipation. Allowance has been made for the higher voltage associated with operation at higher currents and temperature. For determination of voltage change with current deviations from IZT see Micro Note 202. MSC0995.PDF ISO 9001 CERTIFIED REV F 11/01/99