2N3867

TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PNP SILICON LOW POWER TRANSISTOR Qualified per MIL-PRF-19500/350 DEVICES LEVELS 2N3867 2N3868 2N3867S 2N3868S JAN JANTX JANTXV JANS ABSOLUTE MAXIMUM RATINGS (TC = +25°C unless otherwise noted) Parameters / Test Conditions Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Total Power Dissipation @ TA = +25°C (1) Operating & Storage Junction Temperature Range THERMAL CHARACTERISTICS Parameters / Test Conditions Thermal Resistance, Junction-to-Ambient Symbol RθJA Max. 175 Unit °C/mW Symbol 2N3867 VCBO VCEO VEBO IC PT TJ, Tstg 40 40 4.0 3.0 1.0 -65 to +200 2N3868 60 60 Unit Vdc Vdc Vdc mAdc W/°C °C TO-5 * 2N3867, 2N3868 Note: * Electrical characteristics for “S” suffix devices are identical to the “non S” corresponding devices. 1/ Derate linearly 5.71mW/°C for TA > +25°C 2/ Derate linearly 57.1mW/°C for TC > +25°C ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted) Parameters / Test Conditions OFF CHARACTERTICS Collector-Emitter Breakdown Current 2N3867, S IC = 10μAdc 2N3868, S Collector-Base Cutoff Current VCB = 40Vdc 2N3867, S VCB = 60Vdc 2N3868, S Emitter-Base Cutoff Current VEB = 4.0Vdc Collector-Emitter Cutoff Current VCE = 40Vdc 2N3867, S VCE = 60Vdc 2N3868, S 2N3867, S VCE = 40Vdc, TA = +150°C 2N3868, S VCE = 60Vdc, TA = +150°C T4-LDS-0170 Rev. 1 (101121) Symbol Min. Max. Unit V(BR)CEO ICBO IEBO 40 60 100 100 1.0 1.0 50 50 Vdc µAdc µAdc TO-39 * (TP-205AD) 2N3867S, 2N3868S ICEX µAdc Page 1 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted) (CONT.) Parameters / Test Conditions ON CHARACTERTICS (2) Symbol Min. Max. Unit Forward-Current Transfer Ratio IC = 500mAdc, VCE = 1.0Vdc IC = 1.5Adc, VCE = 2.0Vdc IC = 2.5Adc, VCE = 3.0Vdc IC = 3.0Adc, VCE = 5.0Vdc IC = 500mAdc, VCE = 1.0Vdc, TA = -55°C Collector-Emitter Saturation Voltage IC = 500mAdc, IB = 50mAdc IC = 1.5Adc, IB = 150mAdc IC = 2.5Adc, IB = 250mAdc Base-Emitter Saturation Voltage IC = 500mA, IB = 50mAdc IC = 1.5A, IB = 150mAdc IC = 2.5A, IB = 250mAdc DYNAMIC CHARACTERISTICS Parameters / Test Conditions 2N3867, S 2N3868, S 2N3867, S 2N3868, S 2N3867, S 2N3868, S 2N3867, S 2N3868, S 2N3867, S 2N3868, S hFE 50 35 40 30 25 20 20 20 25 17 0.5 0.75 1.5 200 150 VCE(sat) Vdc 2N3867, S 2N3868, S VBE(sat) 0.9 0.85 1.0 1.4 1.4 2.0 Vdc Symbol |hfe| Min. 3 Max. 12 Unit kΩ Magnitude of Common Emitter Small-Signal Short Circuit Forward Current Transfer Ratio IC = 100mAdc, VCE = 5.0Vdc, f = 20MHz Output Capacitance VCB = 10Vdc, IE = 0, 100 kHz ≤ f ≤ 1.0MHz Iutput Capacitance VEB = 3.0Vdc, IC = 0, 100 kHz ≤ f ≤ 1.0MHz (2) Pulse Test: Pulse Width = 300μs, Duty Cycle ≤ 2.0% Cobo 120 pF Cibo 800 pF T4-LDS-0170 Rev. 1 (101121) Page 2 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 SWITCHING CHARACTERISTICS Parameters / Test Conditions Delay Time Rise Time Storage Time Fall Time VCC = -30dc, VEB = 0 IC = 1.5Adc, IB1 = 150mAdc VCC = -30dc, VEB = 0 IC = 1.5Adc, IB1 = IB2 = 150mAdc t Symbol t t t Min. Max. 35 65 500 100 100 600 Unit nS nS nS nS d r s f t Turn-On Time VCC = 30, IC = 1.5Adc, IB = 150mA Turn-Off Time VCC = 30, IC = 1.5Adc, IB = 150mA SAFE OPERATING AREA DC Test TC = 25°C, 1 cycle, t = 1.0s Test 1 VCE = 3.33Vdc, IC = 3.0Adc Test 2 VCE = 40Vdc, IC = 160mAdc VCE = 60Vdc, IC = 80mAdc 2N3867, 2N3868, S on t off T4-LDS-0170 Rev. 1 (101121) Page 3 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PACKAGE DIMENSIONS Dimensions Inches Millimeters Min Max Min Max .305 .335 7.75 8.51 .240 .260 6.10 6.60 .335 .370 8.51 9.40 .200 TP 5.08 TP .016 .019 0.41 0.48 See note 8, 14 .016 .019 0.41 0.48 .050 1.27 .250 6.35 .100 2.54 .030 0.76 .029 .045 0.74 1.14 .028 .034 0.71 0.86 .010 0.25 45° TP 45° TP 1, 2, 10, 12, 13, 14 Symbol TO-5, 39 Note 5, 6 4, 5 7 8,9 8,9 8,9 8,9 7 5 3,4 3 10 7 CD CH HD LC LD LL LU L1 L2 P Q TL TW R α NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Beyond r (radius) maximum, TW shall be held for a minimum length of .011 (0.28 mm). 4. Dimension TL measured from maximum HD. 5. Body contour optional within zone defined by HD, CD, and Q. 6. CD shall not vary more than .010 inch (0.25 mm) in zone P. This zone is controlled for automatic handling. 7. Leads at gauge plane .054 +.001 -.000 inch (1.37 +0.03 -0.00 mm) below seating plane shall be within .007 inch (0.18 mm) radius of true position (TP) at maximum material condition (MMC) relative to tab at MMC. The device may be measured by direct methods or by gauging procedure. 8. Dimension LU applies between L1 and L2. Dimension LD applies between L2 and LL minimum. Diameter is uncontrolled in and beyond LL minimum. 9. All three leads. 10. The collector shall be internally connected to the case. 11. Dimension r (radius) applies to both inside corners of tab. 12. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology. 13. Lead 1 = emitter, lead 2 = base, lead 3 = collector. 14. For non-S-suffix devices (TO-5), dimension LL = 1.5 inches (38.10 mm) min. and 1.75 inches (44.45 mm) max. For Ssuffix types (TO-39), dimension LL = .5 inch (12.70 mm) min. and .750 inch (19.05 mm) max. FIGURE 1. Physical dimensions (similar to TO-5, TO-39) T4-LDS-0170 Rev. 1 (101121) Page 4 of 4