2N7236_10

TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 P-CHANNEL MOSFET Qualified per MIL-PRF-19500/595 DEVICES LEVELS 2N7236 2N7236U JAN JANTX JANTXV ABSOLUTE MAXIMUM RATINGS (TC = +25°C unless otherwise noted) Parameters / Test Conditions Drain – Source Voltage Gate – Source Voltage Continuous Drain Current TC = +25°C Continuous Drain Current TC = +100°C Max. Power Dissipation TC = +25°C Drain to Source On State Resistance Operating & Storage Temperature Note: (1) Derated Linearly by 1.0 W/°C for TC > +25°C (2) VGS = 10Vdc, ID = -11A ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted) Parameters / Test Conditions OFF CHARACTERTICS Drain-Source Breakdown Voltage VGS = 0V, ID = 1mAdc Gate-Source Voltage (Threshold) VDS ≥ VGS, ID = -0.25mA VDS ≥ VGS, ID = -0.25mA, Tj = +125°C VDS ≥ VGS, ID = -0.25mA, Tj = -55°C Gate Current VGS = ±20V, VDS = 0V VGS = ±20V, VDS = 0V, Tj = +125°C Drain Current VGS = 0V, VDS = -80V VGS = 0V, VDS = -100V, Tj = +125°C VGS = 0V, VDS = -80V, Tj = +125°C Static Drain-Source On-State Resistance VGS = 10V, ID = -11A pulsed VGS = -10V, ID = -18A pulsed Tj = +125°C VGS = -10V, ID = -11A pulsed Diode Forward Voltage VGS = 0V, ID = -18A pulsed T4-LDS-0061 Rev. 2 (101873) V(BR)DSS VGS(th)1 VGS(th)2 VGS(th)3 IGSS1 IGSS2 IDSS1 IDSS2 IDSS3 rDS(on)1 rDS(on)2 rDS(on)3 VSD -100 -2.0 -1.0 -4.0 -5.0 ±100 ±200 -25 -1.0 -0.25 0.20 0.22 0.34 -5.0 nAdc Vdc U-PKG (SMD-1) (TO-267AB) Symbol Min. Max. Unit Symbol VDS VGS ID1 ID2 Ptl Rds(on) Top, Tstg Value -100 ± 20 -18 -11 125 0.20 (1) (2) Unit Vdc Vdc Adc Adc W Ω °C TO-254AA -55 to +150 Vdc µAdc mAdc mAdc Ω Ω Ω Vdc Page 1 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 DYNAMIC CHARACTERISTICS Parameters / Test Conditions Gate Charge: On-State Gate Charge Gate to Source Charge Gate to Drain Charge SWITCHING CHARACTERISTICS Parameters / Test Conditions Switching time tests: Turn-on delay time Rinse time Turn-off delay time Fall time Diode Reverse Recovery Time Symbol ID = -11A, VGS = -10Vdc, Gate drive impedance = 9.1Ω, VDD = -50Vdc di/dt ≤ 100A/µs, VDD ≤ 30V, ID = -18A td(on) tr td(off) tf trr Min. Max. 35 85 85 65 280 Unit Symbol VGS = -10V, ID = -18A VDS = -50V Qg(on) Qgs Qgd Min. Max. 60 13 35.2 Unit nC ns ns T4-LDS-0061 Rev. 2 (101873) Page 2 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PACKAGE DIMENSIONS Ltr BL CH LD LL LO LS MHD MHO TL TT TW Term 1 Term 2 Term 3 Dimensions Inches Millimeters Min Max Min Max .535 .545 13.59 13.84 .249 .035 .510 .260 .045 .570 6.32 0.89 12.95 6.60 1.14 14.48 Notes 3 .150 BSC .150 BSC .139 .665 .790 .040 .535 .149 .685 .800 .050 .545 3.81 BSC 3.81 BSC 3.53 16.89 20.07 1.02 13.59 Drain Source Gate 3.78 17.40 20.32 1.27 13.84 4 4 NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. Protrusion thickness of ceramic eyelets included in dimension LL. 4. All terminals are isolated from case. 5. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology. FIGURE 1. Physical dimensions for TO-254AA (2N7236). T4-LDS-0061 Rev. 2 (101873) Page 3 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http://www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Dimensions Letter BL BW CH LH LL1 LL2 LS1 LS2 LW1 LW2 Q1 Q2 Term 1 Term 2 Term 3 Min .620 .445 Inches Max .630 .455 .142 .010 .020 .410 .420 .152 .162 .210 BSC .105 BSC .370 .380 .135 .145 .030 .035 Millimeters Min Max 15.75 16.00 11.30 11.56 3.60 0.26 0.50 10.41 10.67 3.86 4.11 5.33 BSC 2.67 BSC 9.40 9.65 3.43 3.68 0.76 0.89 Drain Gate Source NOTES: 1. Dimensions are in inches. 2. Millimeters are given for information only. 3. The lid shall be electrically isolated from the drain, gate and source. 4. In accordance with ASME Y14.5M, diameters are equivalent to φx symbology. FIGURE 2. Dimensions and configuration of surface mount package outline (TO-267AB), 2N7236U. T4-LDS-0061 Rev. 2 (101873) Page 4 of 4