A3P400-PQG208

FPGA and SoC Product Catalog Lowest Power, Proven Security, and Exceptional Reliability Flash FPGAs Flash SoC FPGAs I N T E G R AT I O N Military FPGAs Automotive FPGAs Design Tools Development Kits Solutions Intellectual Property Broad Range FPGA Supplier (1-500K LE) Features Logic Elements Transceiver Rate I/O Speeds DSP (18x18 Multipliers) Max RAM Processor Option On-board Flash Family Type 2 SmartFusion ProASIC3, IGLOO SmartFusion2 IGLOO2 PolarFire 100 - 30K 5K - 150K 100K - 480K -- 1-5 Gbps 250 Mbps-12.7 Gbps 400 Mbps LVDS 667 Mbps DDR3 750 Mbps LVDS 1600 Mbps DDR4 1.6 Gbps LVDS -- 240 1480 144 Kb 5 Mb 33 Mb Hard 100 MHz ARM Cortex-M3 Hard 166 MHz ARM Cortex-M3 Soft RISC-V Soft RISC-V Soft ARM Cortex-M1 Hard Crypto Processor Up to 512 KB code store Up To 512 KB code store 56 KB secure NVM CPLD Replacements Smallest Packages Low Density FPGAs with more resources and lowest power Mid-Range Density FPGAs Lowest Power, Cost Optimized Microsemi FPGAs and SoC FPGAs Whether you’re designing at the board or system level, Microsemi’s SoC FPGAs and low-power FPGAs are your best choice. The unique, flash-based technology of Microsemi FPGAs and their history of reliability sets them apart from traditional FPGAs. Design with Microsemi’s FPGAs and SoC FPGAs for today’s rapidly-growing consumer and portable medical device markets, or tomorrow’s environmentally friendly data centers, industrial controls, and military and commercial aircraft. Only Microsemi can meet the power, size, cost, and reliability targets that reduce time-to-market and enable long-term profitability. Product Highlights PolarFire FPGA • Award winning cost optimized, lowest power mid-range density FPGA • 100K to 500K LEs • Transceivers up to 12.7 Gbps 4 SmartFusion®2 SoC FPGA • 166 MHz ARM® Cortex®-M3 processor • 5K to 150K logic elements • PCIe Gen2 hard IP and complete microcontroller subsystem 7 IGLOO®2 FPGA • The most feature-rich low-density FPGA • 5K to 150K logic elements • High-performance memory subsystem 8 IGLOO FPGA • • • • 100 to 35K logic elements Ideal for CPLD replacement Smallest package options High I/O-to-logic ratio 9 ProASIC®3 FPGA • 100 to 35K logic elements • Ideal for CPLD replacement • Smallest package options 12 SmartFusion SoC FPGA • 100 MHz ARM Cortex-M3 processor • Up to 6K logic elements, analog processing 15 Military Products • Military FPGA with up to 150K logic elements • Best-in-class security • Industry’s most reliable FPGAs 16 Automotive-Grade Products • AEC-Q 100 T1 and T2 devices • 1K to 90K logic elements 17 Design Tools • Design software for Microsemi FPGAs and SoC FPGAs 18 Development Kits • PolarFire based evaluation boards • IGLOO2 & SmartFusion2 based kits 20 Imaging and Video Solutions • FMC based evaluation boards & IP 24 Motor Control Solutions • Complete solution including evaluation board, IP and software 25 Intellectual Property Cores • Microsemi intellectual property designed and optimized for use with Microsemi FPGAs 26 For the latest device information, valid ordering codes, and details regarding previous generations of flash FPGAs, visit www.microsemi.com/fpga-soc or consult the corresponding product datasheets. 3 PolarFire FPGAs PolarFire Cost-optimized FPGAs Deliver the Lowest Power at Mid-range Densities As a true broad-range FPGA supplier, Microsemi offers FPGA product families spanning 1K to 500K logic elements (LEs). Microsemi extends its non-volatile FPGA leadership with the PolarFire family of cost-optimized FPGAs. PolarFire FPGAs deliver up to 50% lower power than equivalent SRAM FPGAs. The devices are ideal for a wide range of applications within wireline access networks and cellular infrastructure, defense and commercial aviation markets, as well as industrial automation and IoT markets. The devices offer unprecedented capabilities while maintaining all the advantages traditionally associated with nonvolatile FPGAs such as the lowest static power, security, and single event upset (SEU) immunity. Cost-optimized Architecture Power Optimization • Transceiver performance optimized for 12.7 Gbps, which yields smaller size • The lowest static power—28nm non-volatile process yields very low static power • Architecture and process optimizations for specific bandwidths (10 Gbps–40 Gbps) at specific densities • Optimized for 12.7 Gbps, which yields the lowest power • 1.6 Gbps I/Os—best-in-class hardened I/O gearing logic with CDR (supports SGMII/GbE links on these GPIOs) • High-performance, best-in-class hardened security IP in mid-range devices • Low power modes—Flash*Freeze yields best-in-class standby power • Integrated hard IP—DDR PHY, PCIe endpoint/root port, crypto processor • Total power (static and dynamic)—up to 50% lower power Solving Key Market Issues Communications • Significantly improved network capacity and coverage with limited spectrum and CAPEX • Delivers 4K video • Lower OPEX • IoT growth with minimal energy consumption • Lower physical and carbon footprint 4 Defense Industrial • Anti-tamper for Foreign Military Sales (FMS) • Increased networking of factory automation • Increasing automation in vehicles and weaponry • M2M—growth of additional sensors and nodes • Enhancing operator situational awareness • Rise of cloud services requiring decentralized, secure computing • Battlefield portability and increased mission life • Portability becoming more prevalent • Increased cybersecurity • Functional safety • Supply chain security • Cyber security threats PolarFire Architecture PolarFire FPGAs Deliver Up to 500K Logic Elements, 12.7G Transceivers at 50% Lower Power • High-speed serial connectivity with built-in multi-gigabit/multi-protocol transceivers from 250 Mbps to 12.7 Gbps • Up to 481K logic elements consisting of a 4-input look-up table (LUT) with a fractureable D-type flip-flop • Up to 33 Mbits of RAM Reliability Features • SEU immune FPGA configuration cells • Up to 1480 18x18 multiply accumulate blocks with hardened pre-adders • Integrated dual PCIe for up to x4 Gen 2 endpoint (EP) and root port (RP) designs • High-speed I/O (HSIO) supporting up to 1600 Mbps DDR4, 1333 Mbps DDR3L, and 1333 Mbps LPDDR3/DDR3 memories with integrated I/O gearing • General purpose I/O (GPIO) supporting 3.3 V built-in CDR to support SGMII for serial gigabit Ethernet, 1067 Mbps DDR3, and 1600 Mbps LVDS I/O speed with integrated I/O gearing logic Security Features • Built-in SECDED and memory interleaving on LSRAMs • Cryptography Research Incorporated (CRI)-patented differential power analysis (DPA) bitstream protection • Integrated Athena TeraFire EXP5200B Crypto Co-processor, Suite B-capable • System controller suspend mode for safety-critical designs • Integrated physically unclonable function (PUF) • Digest integrity check for FPGA, μPROM, and sNVM • 56 Kbytes of secure eNVM (sNVM) • True random number generator • Built-in tamper detectors and countermeasures • CRI DPA countermeasure pass through license 5 PolarFire FPGAs Cyber Security is the #1 Concern for Connected Devices on the Network Edge It is not enough for today’s demanding applications to meet the functional requirements of their design—they must do so in a secured way. Security starts during silicon manufacturing and continues through system deployment and operations. Microsemi’s PolarFire FPGAs represent the industry’s most advanced secure programmable FPGAs. Microsemi Security Leadership Security Advantage Low Density Microsemi Prevent overbuilding and cloning Full design IP protection Root of trust Secure data communications Anti-tamper Competition Microsemi Competition N/A N/A N/A N/A N/A Best Security in the Industry N/A Weak N/A Weak N/A Best Low-density Security “The number of IoT sensors is expected to approach 30 billion in 5 years – and each unit is a potential entry point for cybercriminals” – The Economist Intelligence Unit, 4/11/2016 Mid-Range “Some call cybercrime the greatest transfer of wealth in human history” – The Center of Strategic and International Studies, July 2013, The Economic Impact of Cybercrime Feature and Packaging Overview of the PolarFire FPGA Family PolarFire FPGAs Features FPGA fabric MPF100T MPF300T MPF500T Logic elements (4 LUT + DFF) 109 192 300 481 Math blocks (18 x 18 MACC) 336 588 924 1480 LSRAM blocks (20 kbits) 352 616 952 1520 µSRAM blocks (64 x 12) 1008 1764 2772 4440 Total RAM (Mbits) 7.6 13.3 20.6 33 µPROM (Kbits, 9-bit bus) 297 297 459 513 User DLLs/PLLs 8 8 8 8 250 Mbps to 12.7 Gbps transceiver lanes 8 16 16 24 Highspeed I/O PCIe Gen2 endpoints/root ports Total I/Os Total user I/Os Packaging Type/size/pitch FCSG325 (11 mm x 11 mm, 11 mm x 14.5 mm*, 0.5 mm) 2 2 2 2 284 368 512 584 Total user I/Os (HSIO/GPIO)/transceivers 170(84/86)/4 FCSG536 (16 mm x 16 mm, 0.5 mm) FCVG484 (19 mm x 19 mm, 0.8 mm) 284(120/164)/4 FCG484 (23 mm x 23 mm, 1.0 mm) 244(96/148)/8 FCG784 (29 mm x 29 mm, 1.0 mm) FCG1152 (35 mm x 35 mm, 1.0 mm) Devices in the same package and family type are pin-compatible. *Wider package dimension applies to the MPF200 device only. 6 MPF200T 170(84/86)/4* 300(120/180)/4 300(120/180)/4 284(120/164)/4 284(120/164)/4 244(96/148)/8 244(96/148)/8 368(132/236)/16 388(156/232)/16 388(156/232)/16 512(276/236)/16 584(324/260)/24 S m a r t  Fu s i o n 2 SoC FPGAs More Resources in Low-Density Devices with ARM Cortex-M3 Processor SmartFusion2 SoC FPGAs deliver more resources in low-density devices with low power requirements, proven security, and exceptional reliability. These devices are ideal for general purpose functions such as Gigabit Ethernet or dual-PCI Express control planes, bridging functions, input/output (I/O) expansion and conversion, video/image processing, system management, and secure connectivity. Microsemi SoC FPGAs are used by customers in Communications, Industrial, Medical, Defense, and Aviation markets. • Embedded ARM Cortex-M3 microcontroller subsystem (MSS) • PCIe Gen2 endpoints starting at   10K logic elements • Embedded DDR3 memory controllers • Instant-on • Small packages • Zero FIT FPGA configuration cells • 1 mW in Flash*Freeze mode • SECDED memory protection • NRBG, AES-256, SHA-256, ECC cryptographic engine • User physically unclonable function (PUF) • CRI DPA pass-through license SmartFusion2 Devices SmartFusion2 Devices Features M2S005 M2S010 M2S025 M2S050 M2S060 M2S090 M2S150 Maximum logic elements (4LUT + DFF) 6,060 12,084 27,696 56,340 56,520 86,184 146,124 Mathblocks (18 × 18) 11 22 34 72 72 84 240 Fabric interface controllers (FICs) Logic/DSP 1 PLLs and CCCs 2 1 2 Security AES256, SHA256, RNG, ECC, PUF Yes eNVM (KB) 128 256 512 eSRAM (KB) 64 eSRAM (KB) non-SECDED 80 CAN, 10/100/1000 Ethernet, HS USB 1 each Multi-mode UART, SPI, I2C, timer Fabric memory 8 AES256, SHA256, RNG Cortex-M3 + instruction cache MSS 2 6 2 each LSRAM 18K blocks 10 21 31 69 109 uSRAM 1K blocks 11 22 34 72 112 240 Total RAM (kbits) 191 400 592 1,314 2,074 4,488 DDR controllers (count × width) 1 × 18 SERDES lanes High-speed User I/O 0 2 × 36 1 × 18 2 x 36 8 4 16 4 PCIe endpoints 0 MSIO (3.3 V) 115 236 1 2 123 157 139 4 271 309 292 MSIOD (2.5 V) 28 40 62 40 106 DDRIO (2.5 V) 66 70 176 76 176 Total user I/Os 209 233 267 377 387 425 574 I/Os per Package Package Options Package type FCS(G)325 VF(G)256 FCS(G)536 0.5 0.8 0.5 11 × 11 14 × 14 16 × 16 Pitch (mm) Length × width (mm) Device I/O Lanes I/O Lanes I/O FCV(G)484 TQ(G)144 FG(G)484 FG(G)676 FG(G)896 0.5 1.0 1.0 1.0 1.0 20 × 20 23 × 23 27 × 27 31 × 31 35 × 35 0.8 Lanes 161 M2S005 (S) VF(G)400 17 × 17 I/O Lanes 19 × 19 I/O Lanes 171 I/O Lanes I/O 84 209 84 Lanes I/O Lanes 138 2 195 4 233 4 138 2 207 4 267 4 2 207 4 267 4 200 2 207 4 267 4 387 4 180 4 267 4 425 4 M2S010 (S/T/TS) M2S025 (T/TS) 180 2 M2S050 (T/TS) 200 M2S060 (T/TS) M2S090 (T/TS) M2S150 (T/TS) Notes: 1. M2S090 FCSG325 package dimension are 11 × 13.5. 293 4 248 4 2. Highlighted devices can migrate vertically in the same package. I/O Lanes 377 8 FC(G)1152 I/O Lanes 574 16 3. (G) indicates that the package is RoHS 6/6 compliant/Pb-free. www.microsemi.com/products/fpga-soc/soc-fpga/smartfusion2 7 I G L O O 2 FPGAs More Resources in Low-Density Devices with High-Performance Memory Subsystem IGLOO2 FPGAs deliver more resources in low-density devices with low power requirements, proven security, and exceptional reliability. These devices are ideal for general purpose functions such as Gigabit Ethernet or dual-PCI Express control planes, bridging functions, input/output (I/O) expansion and conversion, video/image processing, system management, and secure connectivity. Microsemi FPGAs are used by customers in Communications, Industrial, Medical, Defense, and Aviation markets. • High-performance memory subsystem • Embedded DDR3 memory controllers • Instant-on • PCIe Gen2 endpoints starting at 10K logic elements • SECDED memory protection • Zero FIT FPGA configuration cells • 1 mW in Flash*Freeze mode • CRI DPA pass-through license • NRBG, AES-256, SHA-256, ECC cryptographic engine • User physically unclonable function (PUF) • Small packages IGLOO2 Devices IGLOO2 Devices Features M2GL005 M2GL010 M2GL025 M2GL050 M2GL060 M2GL090 M2GL150 Maximum logic elements (4LUT + DFF) 6,060 12,084 27,696 56,340 56,520 86,184 146,124 Mathblocks (18 × 18) 11 22 34 72 72 84 240 PLLs and CCCs Logic/DSP 2 6 SPI/HPDMA/PDMA Fabric interface controllers (FICs) 1 Data security Memory 2 1 AES256, SHA256, RNG 2 AES256, SHA256, RNG, ECC, PUF eNVM (KB) 128 256 LSRAM 18K blocks 10 21 31 69 109 512 236 uSRAM 1K blocks 11 21 34 72 112 240 1826 2586 5000 eSRAM (KB) 64 Total RAM (kbits) 703 912 DDR controllers (count × width) 1104 1 × 18 2 × 36 1 × 18 2 × 36 8 4 16 SERDES lanes 0 4 PCIe endpoints 0 1 MSIO (3.3 V) 115 MSIOD (2.5 V) 28 40 62 40 106 DDRIO (2.5 V) 66 70 176 76 176 Total user I/Os 209 Commercial (C), Industrial (I), Military (M) C, I High-speed User I/O Grades 8 1 each 2 123 157 233 139 267 4 271 377 309 387 292 425 574 C, I, M Notes: 1. Total logic may vary based on utilization of DSP and memories in your design. Please see the IGLOO2 and SmartFusion2 Fabric User Guide for details. 2. Feature availability is package dependent. I/Os per Package Package Options Package type FCS(G)325 Device 0.5 0.8 0.5 14x14 16x16 I/O Lanes I/O Lanes I/O VF(G)400 FCV(G)484 TQ(G)144 0.5 1.0 1.0 1.0 1.0 19x19 20x20 23x23 27x27 31x31 35x35 0.8 Lanes 161 M2GL005 (S) 17x17 I/O Lanes I/O Lanes 171 I/O Lanes FG(G)484 I/O 84 209 84 Lanes FG(G)676 I/O Lanes 138 2 195 4 233 4 138 2 207 4 267 4 2 207 4 267 4 200 2 207 4 267 4 387 4 180 4 267 4 425 4 M2GL010 (S/T/TS) M2GL025 (T/TS) 180 2 M2GL050 (T/TS) 200 M2GL060 (T/TS) M2GL090 (T/TS) M2GL150 (T/TS) Notes: 1. M2GL090 FCS325 package dimension are 11 x 13.5. 8 FCS(G)536 11x11 Pitch (mm) Length × width (mm) VF(G)256 293 4 248 I/O Lanes 377 8 4 2. Highlighted devices can migrate vertically in the same package. www.microsemi.com/products/fpga-soc/fpga/igloo2-fpga FG(G)896 3. (G) indicates that the package is RoHS 6/6 compliant/Pb-free FC(G)1152 I/O Lanes 574 16 IGLOO Family: IGLOO/e FPGAs The Ideal Low-Power, Programmable Solution for CPLD Replacement The IGLOO family of reprogrammable and full-featured flash FPGAs is designed to meet the low-power and area requirements of today’s portable electronics. Based on nonvolatile flash technology, the 1.2 V to 1.5 V operating voltage family offers the industry’s lowest power consumption—as low as 5 µW. The IGLOO family supports up to 35K logic elements with up to 504 kbits of true dualport SRAM, up to six embedded PLLs, and up to 620 user I/Os. Low-power applications that require 32-bit processing can use the ARM Cortex-M1 processor without license fees or royalties in M1 IGLOO devices. Developed specifically for implementation in FPGAs, Cortex-M1 devices offer an optimal balance between performance and size to minimize power consumption. • Low-power FPGAs • 1.2 V core and I/O voltage • Flash*Freeze technology for low power consumption • Instant-on • AES-protected in-system programming (ISP) • User nonvolatile FlashROM IGLOO/e Devices IGLOO devices AGL030 AGL060 AGL125 Features ARM-Enabled IGLOO1 devices Logic Fabric memory AGL250 AGL400 M1AGL250 AGL600 AGL1000 AGLE600 M1AGL600 M1AGL1000 AGLE3000 M1AGLE3000 Logic elements (approximate) 330 700 1,500 3,000 5,000 7,000 11,000 7,000 35,000 System gates 30,000 60,000 125,000 250,000 400,000 600,000 1,000,000 600,000 3,000,000 VersaNet globals3 6 18 18 18 18 18 18 18 18 Flash*Freeze mode (typical, μW) 5 10 16 24 32 36 53 49 137 AES-protected ISP1 Yes Yes Yes Yes Yes Yes Yes Yes Integrated PLLs with CCC2 1 1 1 1 1 1 6 6 RAM (1,024 bits) 18 36 36 54 108 144 108 504 4 8 8 12 24 32 24 112 FlashROM kbits (1,024 bits) RAM blocks (4,608 bits) 1 1 1 1 1 1 1 1 1 I/O banks 2 2 2 4 4 4 4 8 8 Maximum user I/Os 81 96 133 143 194 235 300 270 620 User I/O Notes: 1. AES is not available for Cortex-M1 IGLOO devices. 2. AGL060 in CS121 does not support the PLL. 3. Six chip (main) and twelve quadrant global networks are available for AGL060 devices and above. I/Os per Package I/O Package QNG48 UCG81 CSG81 CS(G)121 VQ(G)100 CS(G)196 FG(G)144 FG(G)2563 CS(G)281 FG(G)4843 Pitch (mm) 0.4 0.4 0.5 0.5 0.5 0.5 1.0 1.0 0.5 1.0 Length × Width (mm) 6×6 4×4 5×5 6×6 16 × 16 8×8 13 × 13 17 × 17 10 × 10 23 × 23 AGL030 Single-end I/O 34 66 66 AGL060 Single-end I/O 97 IGLOO/e Devices 77 71 AGL125 Single-end I/O 71 133 AGL250/ M1AGL250 Single-end I/O2 68 1431 Differential I/O 13 351 AGL400 96 Single-end I/O2 143 178 Differential I/O 35 38 AGL600/ M1AGL600 Single-end I/O 97 177 215 Differential I/O 25 43 53 AGL1000/ M1AGL1000 Single-end I/O 97 177 215 300 25 44 53 74 AGLE600 AGLE3000/ M1AGLE3000 2 2 Differential I/O Single-end I/O 165 2 Differential I/O 79 Single-end I/O2 341 Differential I/O 168 Notes: 1. The M1AGL250 device does not support CS196 package. 2. Each used differential pair reduces the number of single-end I/Os available by two. 3. FG256 and FG484 are footprint-compatible packages. www.microsemi.com/products/fpga-soc/fpga/igloo-e 9 IGLOO Family: IGLOO nano FPGAs The Industry’s Lowest-Power, Smallest-Size Solution IGLOO nano products offer groundbreaking possibilities in power, size, lead-times, operating temperature ranges, and cost. Available in logic densities from 100–3K logic elements, 1.2 V to 1.5 V IGLOO nano devices have been designed for high-volume applications where power and size are the key decision criteria. IGLOO nano devices are perfect ASIC or ASSP replacements, yet retain the historical FPGA advantages of flexibility and quick time-to-market in low-power and small footprint profiles. • Ultra low power in Flash*Freeze mode, as low as 2 µW • Small footprint packages from 14 mm × 14 mm to 3 mm × 3 mm • Enhanced commercial temperature • Enhanced I/O features • ISP and security • 1.2 V to 1.5 V single voltage operation • Embedded SRAM and non-volatile memory (NVM) • Instant-on IGLOO nano Devices IGLOO nano Devices Logic Features AGLN010 AGLN020 AGLN125 AGLN250 Logic elements (approximate) 100 200 700 1,500 3,000 System gates 10,000 20,000 60,000 125,000 250,000 VersaNet globals 4 4 18 18 18 Flash*Freeze mode (typical, μW) 2 4 AES-protected ISP 10 16 24 Yes Yes Yes Integrated PLL in CCCs1 1 1 1 RAM kbits (1,024 bits) 18 36 36 4,608-bit blocks 4 8 8 Fabric memory User I/O AGLN060 FlashROM kbits (1,024 bits) 1 1 1 1 1 I/O banks 2 3 2 2 4 Maximum user I/Os (packaged device) 34 52 71 71 68 Notes: 1. AGLN060, AGLN125 and AGLN250 in the CS(G)81 package do not support PLLs. I/Os per Package I/O Packages Pitch (mm) Length × width (mm) AGLN010 UCG36 QNG48 QNG68 CSG81 VQ(G)1002 0.4 0.4 0.4 0.5 0.5 3×3 6×6 8×8 5×5 16 × 16 23 34 49 52 AGLN020 AGLN060 60 71 AGLN125 60 71 AGLN250 60 68 Notes: 1. IGLOO nano devices do not support differential I/Os. 10 2. (G) indicates that the package is RoHS 6/6 compliant/Pb-free. www.microsemi.com/products/fpga-soc/fpga/igloo-nano IGLOO Family: IGLOO PLUS FPGAs The Low-Power FPGA with Enhanced I/O Capabilities IGLOO PLUS products deliver low power consumption and enhanced I/Os in a feature-rich programmable device, offering more I/ Os per logic element than IGLOO devices, and supporting independent Schmitt trigger inputs, hot-swapping, and Flash*Freeze bus hold. Ranging from 330–1.5K logic elements, 1.2V to 1.5V IGLOO PLUS devices have been optimized to meet the needs of I/Ointensive, power-conscious applications that require exceptional features. • I/O-optimized FPGA • Low power in Flash*Freeze mode, as low as 5 µW • Small footprint and low-cost packages • 1.2 V to 1.5 V single voltage operation • AES-protected ISP • Reprogrammable flash technology • Embedded SRAM NVM • Instant-on IGLOO PLUS Devices IGLOO PLUS Devices Features Logic AGLP030 AGLP060 Logic elements (approximate) 330 7,000 1,500 System gates 30,000 60,000 125,000 VersaNet globals 6 18 18 Flash*Freeze mode (typical, μW) 5 10 16 Yes Yes AES-protected ISP Integrated PLL in CCCs 1 1 RAM (1,024 bits) 18 36 1 4 8 FlashROM kbits (1,024 bits) 4,608-bit blocks 1 1 1 I/O banks 4 4 4 Maximum user I/Os (packaged device) 120 157 212 Fabric memory User I/O AGLP125  Notes: 1. AGLP060 in CS(G)201 does not support the PLL. I/Os per Package I/O Package CS(G)201 CS(G)281 CS(G)289 Pitch (mm) 0.5 0.5 0.8 0.4 Length × width (mm) 8×8 10 × 10 14 × 14 22 × 22 AGLP030 Single-end I/O 120 120 AGLP060 Single-end I/O 157 157 AGLP125 Single-end I/O IGLOO PLUS Devices Notes: 1. IGLOO Plus devices do not support differential I/Os. 212 VQ(G)128 VQ(G)176 101 137 212 2. (G) indicates that the package is RoHS 6/6 compliant/Pb-free. www.microsemi.com/products/fpga-soc/fpga/igloo-plus 11 ProASIC3 Family: ProASIC3/E FPGAs Low-Density CPLD Replacement FPGA The ProASIC3 series of flash FPGAs offers a breakthrough in power, performance, density, and features for today’s most demanding high-volume applications. ProASIC3 devices support the ARM Cortex-M1 processor, offering the benefits of programmability and time-to-market at low cost. ProASIC3 devices are based on nonvolatile flash technology and support 330–35K logic elements and up to 620 high-performance I/Os. For automotive applications, selected ProASIC3 devices are qualified to AEC-Q100 and are available with AEC T1 screening and PPAP documentation. • 1.5 V single voltage operation • Instant-on • Advanced I/O standards • 350 MHz system performance • Configuration memory error immune • Secure ISP ProASIC3/E Devices ProASIC3/E Devices A3P030 A3P0602 A3P1252 ARM Cortex-M1 Devices Logic Fabric memory A3P400 A3P600 A3P10002 A3PE600 M1A3P250 M1A3P400 M1A3P600 M1A3P1000 A3PE1500 A3PE3000 M1A3PE1500 M1A3PE3000 Logic elements (approximate) 330 700 1,500 3,000 5,000 7,000 11,000 7,000 16,000 35,000 System gates 30,000 60,000 125,000 250,000 400,000 600,000 1,000,000 600,000 1,500,000 3,000,000 VersaNet globals3 6 18 18 18 18 18 18 18 18 18 AES-protected ISP1 Yes Yes Yes Yes Yes Yes Yes Yes Yes Integrated PLL in CCCs 1 1 1 1 1 1 6 6 6 RAM (1,024 bits) 18 36 36 54 108 144 108 270 504 4,608-bit blocks 4 8 8 12 24 32 24 60 112 1 1 1 1 1 1 1 1 1 FlashROM kbits (1,024 bits) User I/O A3P2502 Features 1 I/O banks 2 2 2 4 4 4 4 8 8 8 Maximum user I/Os 81 96 133 157 194 235 300 270 444 620 Notes: 1. AES is not available for ARM Cortex-M1 ProASIC3 devices. 2. Available as automotive “T” grade 3. Six chip (main) and three quadrant global networks are available for A3P060 and above. I/Os per Package ProASIC3 I/O Type QNG48 QNG68 VQ(G)100 TQ(G)144 PQ(G)208 FG(G)144 FG(G)256 FG(G)324 FG(G)484 FG(G)676 FG(G)896 Pitch (mm) 0.4 0.4 0.5 0.5 0.5 1.0 1.0 1.0 1.0 1.0 1.0 20 × 20 30.6 × 30.6 13 × 13 17 × 17 19 × 19 23 × 23 27 × 27 31 × 31 Length × width (mm) 6×6 8×8 16 × 16 A3P030 Single-end I/O 34 49 77 A3P060 Single-end I/O 71 91 A3P125 Single-end I/O 71 100 A3P250/ M1A3P250 Single-end I/O 68 97 Differential I/O 13 24 38 A3P400/ M1A3P400 Single-end I/O 151 97 178 Differential I/O 34 25 38 A3P600/ M1A3P600 Single-end I/O 154 97 177 Differential I/O 35 25 43 60 A3P1000/ M1A3P1000 Single-end I/O 154 97 177 300 Differential I/O 35 25 A3PE600 Single-end I/O Differential I/O 97 157 235 44 74 165 270 79 135 A3PE1500/ M1A3PE1500 Single-end I/O 147 280 444 Differential I/O 65 139 222 A3PE3000/ M1A3PE3000 Single-end I/O 147 221 341 620 Differential I/O 65 110 168 310 Notes: 1. (G) indicates that the package is RoHS 6/6 compliant/Pb-free. 12 96 133 www.microsemi.com/products/fpga-soc/fpga/proasic3-e ProASIC3 Family: ProASIC3 nano FPGAs Low-Density CPLD Replacement FPGA with Small Package Footprint Microsemi’s innovative ProASIC3 nano devices bring a new level of value and flexibility to high-volume markets. When measured against the typical project metrics of performance, cost, flexibility, and time-to-market, ProASIC3 nano devices provide an attractive alternative to ASICs and ASSPs in fast-moving or highly competitive markets. Customer-driven total-system cost reduction was a key design criteria for the ProASIC3 nano program. Single-chip implementation and a broad selection of small footprint packages contribute to lower total system costs. • 1.5 V core for low power • Configuration memory error immune • Enhanced I/O features • 350 MHz system performance • Enhanced commercial temperature • ISP and security ProASIC3 nano Devices ProASIC3 nano Devices Logic Fabric memory User I/O Features A3PN010 A3PN020 A3PN060 A3PN125 A3PN250 Logic elements (approximate) 100 200 700 1,500 3,000 System gates 10,000 20,000 60,000 125,000 250,000 VersaNet globals 4 4 18 18 18 AES-protected ISP Yes Yes Yes Integrated PLL in CCCs 1 1 1 RAM (1,024 bits) 18 36 36 4,608-bit blocks 4 8 8 FlashROM kbits (1,024 bits) 1 1 1 1 1 I/O banks 2 3 2 2 4 Maximum user I/Os (packaged device) 34 49 71 71 68 I/Os per Package I/O Packages Pitch (mm) Length × width (mm) A3PN010 QNG48 QNG68 VQ(G)1001 0.4 0.4 0.5 6×6 8×8 16 × 16 34 49 A3PN020 A3PN060 71 A3PN125 71 A3PN250 68 Notes: 1. (G) indicates that the package is RoHS 6/6 compliant/Pb-free. 2. ProASIC3 nano devices do not support differential I/Os. www.microsemi.com/products/fpga-soc/fpga/proasic3-nano 13 ProASIC3 Family: ProASIC3L FPGAs Low-Density, Low-Power CPLD Replacement FPGA ProASIC3L FPGAs feature lower dynamic and static power requirements than the previous generation of ProASIC3 FPGAs, and lower power requirements by orders of magnitude than SRAM competitors, combining dramatically reduced power consumption with up to 350 MHz operation. The ProASIC3L family also supports the free implementation of an FPGA-optimized 32-bit ARM Cortex-M1 processor, enabling system designers to select the Microsemi flash FPGA solution that best meets their speed and power requirements, regardless of application or volume. Optimized software tools using power-driven layout (PDL) provide instant power reduction capabilities. • Low power 1.2 V to 1.5 V core operation • Up to 350 MHz system performance • Configuration memory error immune • ISP and security • 700 Mbps DDR, LVDS capable I/Os • Flash*Freeze technology for low power ProASIC3L Low-Power Devices ProASIC3L Devices Features A3P1000L A3PE3000L M1A3P600L M1A3P1000L M1A3PE3000L 7,000 11,000 35,000 System gates 600,000 1,000,000 3,000,000 Logic VersaNet globals 18 18 18 AES-protected ISP2 Yes Yes Yes Integrated PLL in CCCs3 1 1 6 RAM (1,024 bits) 108 144 504 4,608-bit blocks 24 32 112 FlashROM kbits (1,024 bits) 1 1 1 I/O banks 4 4 8 Maximum user I/Os (packaged device) 235 300 620 Fabric memory User I/O A3P600L Logic elements (approximate) ARM Cortex-M1 Devices 1 Notes: 1. Refer to the Cortex-M1 product brief for more information. 2. AES is not available for Cortex-M1 ProASIC3L devices. 3. For the A3PE3000L, the PQ208 package has six CCCs and two PLLs. I/Os per Package ProASIC3L Devices I/O Type PQ(G)208 FG(G)144 FG(G)256 FG(G)324 FG(G)484 FG(G)896 Pitch (mm) 0.5 1.0 1.0 1.0 1.0 1.0 Length × width (mm) 30.6 × 30.6 13 × 13 17 × 17 19 × 19 23 × 23 31 × 31 A3P600L/ M1A3P600L Single-end I/O 97 Differential I/O 25 A3P1000L/ M1A3P1000L Single-end I/O 97 177 25 44 A3PE3000L/ M1A3PE3000L Single-end I/O 147 221 341 620 Differential I/O 65 110 168 310 Differential I/O Notes: 1. (G) indicates that the package is RoHS 6/6 compliant/Pb-free. 14 www.microsemi.com/products/fpga-soc/fpga/proasic3l 235 60 SmartFusion SoC FPGAs SmartFusion SoCs integrate an FPGA fabric, an ARM Cortex-M3 processor, and a programmable analog compute engine (ACE), offering full customization, IP protection, and ease-of-use. Based on Microsemi’s proprietary flash process, SmartFusion SoCs are ideal for hardware and embedded designers who need a true system-on-chip that gives more flexibility than traditional fixed-function microcontrollers without the excessive cost of soft processor cores on traditional FPGAs. • Available in commercial, industrial, and military grades • Hard 100 MHz 32-bit ARM Cortex-M3 CPU • 10/100 Ethernet MAC • 8-channel DMA controller • Two peripherals of each type: SPI, I2C, UART, and 32-bit timers • Integrated analog-to-digital converters (ADCs) and digitalto-analog converters (DACs) with 1 % accuracy • Up to 512 KB flash and 64 KB SRAM • Multi-layer AHB communications matrix with up to 16 Gbps throughput • External memory controller (EMC) • Up to ten 15 ns high-speed comparators • Analog compute engine (ACE) offloads CPU from analog processing • On-chip voltage, current, and temperature monitors • Up to 35 analog I/Os and 169 digital GPIOs SmartFusion Devices SmartFusion Devices Logic Microcontroller subsystem (MSS) Programmable analog Features A2F200 A2F500 Logic elements (approximate) System gates RAM blocks (4,608 bits) Flash (KB) SRAM (KB) Cortex-M3 with memory protection unit (MPU) 10/100 Ethernet MAC External memory controller (EMC) DMA I2C SPI 16550 UART 32-bit timer PLL 32 kHz low power oscillator 100 MHz on-chip RC oscillator Main oscillator (32 KHz to 20 MHz) ADCs (8-/10-/12-bit SAR) DACs (12-bit sigma-delta) Signal conditioning blocks (SCBs) Comparators3 Current monitors3 Temperature monitors3 Bipolar high voltage monitors3 2,000 200,000 8 256 64 6,000 500,000 24 512 64 Yes Yes Yes 26-bit address, 16-bit data 8 Ch 2 2 2 2 1 1 1 1 2 2 4 8 4 4 8 Yes 26-bit address, 16-bit data1 8 Ch 2 2 2 2 22 1 1 1 34 34 54 104 54 54 104 Notes: 1. Not available on A2F500 for the PQ208 package and A2F060 for the TQ144 package. 2. Two PLLs are available in CS288 and FG484, one PLL in FG256 and PQ208. 3. These functions share I/O pins and may not all be available at the same time. See the “Analog Front-End Overview” section in the SmartFusion Programmable Analog User’s Guide for details. 4. Available on FG484 only. PQ208, FG256 and CS288 packages offer the same programmable analog capabilities as A2F200. Package I/Os: MSS + FPGA I/Os Device A2F2002 A2F5002 Pitch (mm) PQ(G)208 0.5 CS(G)288 0.5 FG(G)256 1.0 FG(G)484 1.0 PQ(G)208 0.5 CS(G)288 0.5 FG(G)256 1.0 FG(G)484 1.0 Length × width (mm) 30.6 × 30.6 11 × 11 17 × 17 23 × 23 30.6 × 30.6 11 × 11 17 × 17 23 × 23 8 16 24 1 22 66 113 8 16 24 2 31 78 135 8 16 24 2 25 66 117 8 16 24 2 41 94 161 8 16 24 1 22 663 113 8 16 24 2 31 78 135 8 16 24 2 25 66 117 12 20 32 3 41 128 204 Direct analog inputs Shared analog inputs1 Total analog input Total analog output MSS I/Os5 FPGA I/Os Total I/Os Notes: 1. There are no LVTTL-capable direct inputs available on A2F060 devices. 2. These pins are shared between direct analog inputs to the ADCs and voltage/current/temperature monitors. 3. EMC is not available on the A2F500, PQ208, and A2F060 TQ144 package. 4. 10/100 Ethernet MAC is not available for A2F060. 5. 16 MSS I/Os are multiplexed and can be used as FPGA I/Os, if not required for MSS. These I/Os support Schmitt triggers, and support only LVTTL and LVCMOS (1.5 V/1.8 V/2.5 V/3.3 V) standards. 6. (G) indicates that the package is RoHS 6/6 compliant/Pb-free. www.microsemi.com/products/fpga-soc/soc-fpga/smartfusion 15 Military Products FPGAs for Military Applications For over 25 years, Microsemi has been the leader for high reliability defense applications. Microsemi FPGAs are qualified to Mil Std 883 Class B and QML class Q. Based on flash architecture, Microsemi offers the industry’s most reliable and low-power FPGAs and SoC FPGAs. Military grade FPGAs are available in IGLOO2, ProASICPlus, and ProASIC3/EL device families, and SoC FPGAs are available in SmartFusion2, SmartFusion, and Fusion device families. In addition to the advantages of the mainstream FPGAs, SoC FPGAs have an embedded ARM Cortex-M3 microcontroller on-chip. SmartFusion and Fusion devices integrate configurable analog peripherals to yield a true system-on-chip solution. • Tested for high reliability at temperature range of –55º C to 125º C • Product longevity • PCI Express Gen1 endpoints • SECDED memory protection • Instant-on • Built-in tamper detection and zeroization capability • Small packages • ISO-9001 and AS-9100-certified quality management system • NRBG, AES-256, SHA-256, and ECC cryptographic engine • Zero FIT FPGA configuration cells • User physically unclonable function (PUF) • CRI DPA pass-through license • Lowest-power operation • Embedded ARM Cortex-M3 microcontroller subsystem Military SmartFusion2 and IGLOO2 I/Os per Package Package Options Package Type FG(G)484 Pitch (mm) Length × width (mm) FC(G)1152 1.0 1.0 23 × 23 35 × 35 Device I/O Lanes M2S010/M2GL010 (T/TS) 233 4 M2S025/M2GL025 (T/TS) 267 4 M2S050/M2GL050 (T/TS) 267 4 M2S060/M2GL060 (T/TS) 267 4 M2S090/M2GL090 (T/TS) 267 4 M2S150/M2GL150 (T/TS) I/O Lanes 574 16 Notes: 1. Can migrate vertically in the same package. 2. Gold wire bonds are available for the FG484 package by appending X399 to the part number when ordering (for example, M2S090 (T/TS)-1FG484MX399). 3. All the packages are available with lead and lead free. (G) indicates that the package is RoHS 6/6 compliant/Pb-free. Military SmartFusion, ProASIC3, and Fusion I/Os per Package Devices A3P250 A3PE600L A3P1000/M1A3P1000 A3PE3000L/M1A3PE3000L AFS600 AFS1500 A2F060 A2F500 I/O Type VQ(G)100 PQ(G)208 FG(G)144 FG(G)256 FG(G)484 Pitch (mm) 0.5 0.5 1.0 1.0 1.0 1.0 Length × width (mm) 16 × 16 30.6 × 30.6 13 × 13 17 × 17 23 × 23 31 × 31 Single-end I/O 68 Differential I/O 13 Single-end I/O 270 Differential I/O 135 Single-end I/O 154 97 177 Differential I/O 35 25 44 300 74 Single-end I/O 341 620 Differential I/O 168 310 Single-end I/O 119 172 Differential I/O 58 86 Single-end I/O 119 223 Differential I/O 58 109 Analog I/O 16 FPGA I/O 66 MSS I/O 26 Analog I/O 26 35 FPGA I/O 66 128 MSS I/O 25 41 Notes: 1. (G) indicates that the package is RoHS 6/6 compliant/Pb-free. 16 FG(G)896 www.microsemi.com/products/fpga-soc/military-temperature Automotive-Grade Products Microsemi offers dedicated automotive-grade devices with various densities, features, footprints, and temperature grades. All devices and packages are AEC-Q100-qualified and tested at extended temperatures. PPAP documentation is available for ProASIC3 devices on request. Family Logic Elements Temperature Range Maximum User I/Os Maximum SERDES IGLOO21 6K to 86K Grade 1 (–40 °C to 135 °C) Grade 2 (–40 °C to 125 °C) Up to 425 41 SmartFusion2 6K to 86K Grade 2 (–40 °C to 125 °C) Up to 425 4 700K to 11K Grade 1 (–40 °C to 135 °C) Grade 2 (–40 °C to 115 °C) Up to 300 Not available ProASIC3 Notes: 1. SERDES is only supported in the IGLOO2 devices with Grade 2 temperature range, not on Grade 1 temperature range. ProASIC3 Package Options Features A3P060 A3P125 A3P250 A3P1000 0.5 1 1 1 16 × 16 13 × 13 17 × 17 23 × 23 Device I/O I/O I/O I/O A3P060 71 96 A3P125 71 97 A3P250 68/13 97/24 97/25 177/44 300/74 VFG2561 VFG4001 FGG4841 FGG6761 0.8 0.8 1 1 14 × 14 17 × 17 23 × 23 27 × 27 Pitch (mm) Length × width (mm) A3P1000 SmartFusion 2 and IGLOO2 Package Options Type Pitch (mm) Length × width (mm) Device I/O Lanes I/O Lanes M2S005S 161 M2S010TS 138 2 195 4 233 4 M2S025TS 138 2 207 4 267 4 207 4 267 267 171 M2S060TS M2S090TS Note : 1. All Automotive packages are RoHS compliant and available in lead-free options only. I/O Lanes I/O Lanes 4 387 4 4 425 4 209 2. Shadeing indicates that device packages have vertical migration capability. 17 Design Tools for Microsemi FPGAs and SoC FPGAs Libero® SoC Microsemi’s Libero SoC design suite offers high productivity with its comprehensive, easy-to-learn, easy-to-adopt development tools that are used for designing with Microsemi’s power-efficient flash-based devices. The Libero SoC design suite manages the entire design flow from design entry, synthesis, and simulation, through place-androute, timing, and power analysis, with enhanced integration of the embedded design flow. The suite integrates industry-standard Synopsys Synplify Pro synthesis and Mentor Graphics ModelSim simulation with best-in-class constraints management, debug capabilities, timing analysis, power analysis, secure production programming, and push button-design flow. The Libero SoC design suite features an intuitive design flow with GUI wizards to guide the design process. Its easy-to-adopt, single-click synthesis-to-programming flow integrates industry-standard third-party tools, and a rich IP library of DirectCores and CompanionCores, and it supports complete reference designs and development kits. FPGA Design Flow Embedded Design Flow Libero SoC Firmware Catalog Smart Design IP Catalog Graphical Configurators & Applications Soft Console IDE Design Sample Projects Complier Simulation Debugger Synthesis Layout Timing Analysis Power Analysis Hardware Debug Programmer Demo/Eval Board SmartDebug SmartDebug tool is a new approach to debug the Microsemi FPGAs and SERDES without using an integrated logic analyzer(ILA). SmartDebug utilizes the dedicated and specialized probe points built into the FPGA fabric, which significantly accelerates and simplifies the debug process. It also provides the ability to select different probe points without additional overhead and saves significant recompile time. SmartDebug supports IGLOO2, SmartFusion2, and RTG4 FPGA families only. The enhanced debug features implemented in these FPGAs give access to any logic element and enable designers to check the state of inputs and outputs in real time, without any need to re-design. • Uses minimal FPGA resources • Live probe supports dynamic • Has observability and for debug signals controllability features • Active probes support static and pseudo static signals • Requires no recompilation or re-programming • Allows on-the-fly changing of probe points DUT D SET Q CLR Q SET Q CLR Q D SET Q CLR Q SET Q CLR Q LIVE PROBE A RAM D D D SET Q CLR Q LIVE PROBE B LIVE PROBE A LIVE PROBE B JTAG LIVE PROBE for Feedback 18 SmartDebug Licensing Information Libero Device Support Software Libero SoC PolarFire Eval (Free) Silver (Free) Gold Platinum/ Standalone MPF100T × × × × × MPF100, MPF200 (T & TS devices), MPF300 packages on eval boards only × × × × All PolarFire devices × ×   × × × × × × × Product Family Device PolarFire SmartFusion2, IGLOO2 SmartFusion, IGLOO, ProASIC3, Fusion PLUS ProASIC and ProASIC Axcelerator SX-A, eX, MX License Type Libero IDE Libero SoC M2S005, M2S010, M2S025 (T devices included) M2GL005, M2GL010, M2GL025 (T devices included) × × All SmartFusion2 and IGLOO2 devices including S devices × × All Devices × × × × All Devices × × × AX125, AX250, AX500, AX1000 × × × AX2000 ×   × All Devices × × × License Types   Evaluation Silver Gold Platinum 30 days 1Yr 1Yr 1Yr Libero IP bundle Libero IP bundle Libero IP bundle obfuscated and obfuscated and obfuscated and selected RTL IPs selected RTL IPs selected RTL IPs ModelSim ME ModelSim ME ModelSim ME Pro ModelSim ME Pro ProMixed lan- Single language Mixed language Mixed language guage simulation simulation simulation simulation Synplify Pro Synplify Pro Synplify Pro Programming Not Supported Supported Identify Not Supported Supported Validity DirectCores Simulation Synthesis Standalone Archive Permanent (No Upgrades) RTL for Libero IP RTL for Libero IP bundle cores bundle cores Standalone (1 yr) 1Yr Libero IP bundle obfuscated and selected RTL IPs Not applicable Not applicable Synplify Pro Not applicable Not applicable Supported Supported Supported Supported Supported Supported Not Supported Not Supported 19 Development Kits PolarFire Evaluation Kit • 4GB 32-bit DDR4, 2GB 16-bit DDR3, and 1Gb SPI Flash Memory • 2x RJ45 ports with PHY for Ethernet 1588 applications • Support for SFP+ interface and IOG loopback • High-speed SerDes interface • 4x FMC connector (HPC) • In-silicon temperature monitoring • On-board 50 MHz system clock Part Number MPF300-EVAL-KIT-ES Supported Device MPF300TS-1FCG1152EES Price $1495 PolarFire Splash Kit • RJ45 port with PHY for SGMII applications • FMC connector (LPC) • Prototype breadboard area • PCI express (x4) edge connector • On-board 50 MHz system clock Part Number MPF300-SPLASH-KIT-ES 20 Supported Device MPF300TS-1FCG484EES Price $699 Development Kits Arrow PolarFire Everest Kit • Triple 1GbE interface • 1 × 10GbE SFP+ cage • PCI express (x4) Gen2 • Dual DDR3L (x32 and x16) • High-speed FMC (HPC) expansion • HDMI output • Expansion connectors: PMOD • Other low-speed interfaces: UART, SPI, and I2C Part Number AVMPF300TS-01 Supported Device MPF300TS-1FCG1152EES Price $499 Future PolarFire Avalanche Board • 1GbE interface with PHY (VSC8531) • WiFi module • Expansion connectors: Arduino Shield, MikroBus, PMOD • DDR3 SDRAM (256Mx16) • SFP cage • 64 Mbit SPI Flash • Other low-speed interfaces: UART and JTAG Part Number AVMPF300TS-01 Supported Device MPF300TS-FCG484EES Price $179.95 21 Development Kits SmartFusion2 Starter Kit HS USB OTG Interface Reset Button User Button M2S SOM (System-On-Module) 64 MB LPDDR • Cost-efficient development platform for SmartFusion2 SoC FPGA SmartFusion2 • Supports industry-standard interfaces, including Ethernet, USB, SPI, I2C, and UART JP1 JP3 USBPower & USB UART I/F Breadboard Area - 50K LE or 10K LE SmartFusion2 device - JTAG interface for programming and debug • Preloaded with uClinux image to support Linux-based development environments LEDs • Board features - 10/100 Ethernet - USB 2.0 On-The-Go - 64 MB LPDDR, 16 MB SPI flash memory • Comes with FlashPro4 programmer, USB cables, and USB WiFi module - Four LEDs and two push-button switches Ethernet I/F Part Number JTAG I/F JP2 Ethernet PHY 16 MB SPI Flash Supported Device Price SF2-STARTER-KIT M2S050-FGG484 $299 SF2-484-STARTER-KIT M2S010-FGG484 $299 SF2060-STARTER-KIT M2S060-FGG484 $299 SmartFusion2 Advanced Development Kit - A pair of SMA connectors, two FMC connectors, PCIe x4 edge connector • Full featured kit to develop applications using SmartFusion2 SoC FPGAs SERDES3 SERDES3 TX/RX Reference SMA Pairs Clock FMC Connecter HPC FT4232 Header Bread 12V Board DIP I2C On-Off Power Supply Space Switch Header Switch Input Reset Switch Debug Switch USB-UART Terminal JTAG Programming Header 10/100/1000 Ethernet RJ45 Connector Port0 FMC Connector LPC 10/100/1000 Ethernet RJ45 Connector Port1 ETM Trace Debug Header USB Micro-AB OTG Connector • Enables power measurement - 2xRJ45 interface for 10/100/1000 Ethernet USB micro-AB connector • Two FMC connectors with HPC/LPC pinout for expansion - FTDI programmer interface to program the external SPI flash • Various communication interfaces, switches, and LEDs for prototyping - JTAG/SPI programming interface, RVI header for application programming, and debug • Kit comes with free 1-year Gold Libero SoC license - Quad 2:1 MUX/DEMUX highbandwidth bus switch • Board features - Dual in-line package (DIP) switches for user application - 150K LE SmartFusion2 device Marvel PHY DDR3 Memory x4 PCIe Edge Connector - Push-button switches and LEDs for demo purposes - DDR3 SDRAM, SPI flash SPI Debug Debug RVI/IAR Power SmartFusion2 Flash LEDS Switch Header Management - Current measurement test points Part Number M2S150-ADV-DEV-KIT Supported Device M2S150TS-1FCG1152 Price $999 SmartFusion2 Security Evaluation Kit 50 Mhz Oscillator LPDDR GPIO Header SW5 LEDs JTAG Programming Header Reset Switch ETM Trace Debug Header On/Off Switch 12 V Power Supply Input RVI/IAR Debug Header 10/100/1000 Ethernet RJ45 Connector TX/RX SERDES SMA Pairs USB-UART Terminal MicroUSB OTG SERDES Reference Clock I2C Header SmartFusion2 SW1 x1 PCle Edge Connector 22 On Board 125 Mhz LP Crystals SW4 • Evaluate the data security features of SmartFusion2 SoC FPGAs • Board features - 90 K LE SmartFusion2 device • Develop and test PCI Express Gen2 x1 lane designs - 64 Mbit SPI flash memory • Test the signal quality of the FPGA transceiver using full-duplex SERDES SMA pairs - PCI Express Gen2 x1 interface - Four SMA connector for testing of  full-duplex SERDES channel • Measure the low power consumption of the SmartFusion2 SoC FPGA • Quickly create a working PCIe link with the included PCIe control plane demo • Kit includes free 1-year Gold Libero SoC license - 512 MB LPDDR - RJ45 interface for 10/100/1000 Ethernet - JTAG/SPI programming interface - Headers for I2C, SPI, GPIOs - Push-button switches and LEDs for demo purposes - Current Measurement Test Points SW2 SPI SW3 Current Measurement Flash Current Measurement Part Number Supported Device Price M2S090TS-EVAL-KIT M2S090TS-FGG484 $399 Development Kits Digikey SmartFusion2 Maker Board Devices: M2S010-MKR-KIT • The SmartFusion2 M2S010 SoC FPGA • Ambient Light Sensor • USB Integrated FlashPro5 programming hardware • 16Mbit SPI Flash • USB port for UART communications • The 10/100/1000BASE-T VSC8541 PHY • 50 MHz clock source • Wurth Electronics RJ45 7499111221A Part Number Supported Device Price M2S010-TQG144 $33.75 available from Digi-Key M2S010-MKR-KIT IGLOO2 Evaluation Kit 50 Mhz Oscillator LPDDR GPIO Header SW5 LEDs JTAG Programming Header Reset Switch • Gives designers access to IGLOO2 FPGAs that offer leadership in I/O density, security, reliability, and lowpower for mainstream applications ETM Trace Debug Header On/Off Switch RVI/IAR Debug Header 12 V Power Supply Input 10/100/1000 Ethernet RJ45 Connector Tx/Rx SERDES SMA Pairs USB-UART Terminal • Board features - IGLOO2 FPGA in the FGG484 package (M2GL010T-1FGG484) • Supports industry-standard interfaces including Gigabit Ethernet, USB 2.0 OTG, SPI, I2C, and UART • Comes preloaded with a PCIe control plane demo - JTAG/SPI programming interface - Gigabit Ethernet PHY and RJ45 connector - USB 2.0 OTG interface connector - 1 GB LPDDR, 64 MB SPI flash - Headers for I2C, UART, SPI, GPIOs • Can be powered by a 12 V power supply or the PCIe connector, and includes a FlashPro4 programmer - ×1 Gen2 PCIe edge connector - Tx/Rx/Clk SMP pairs I2C Header MicroUSB OTG SERDES Reference Clock LP Crystals SW1 x1 PCIe Edge Connector On Board 125 Mhz SW4 IGLOO2 SW3 Current Measurement SW2 SPI Flash Part Number M2GL-EVAL-KIT Supported Device Price M2GL010T-1FGG484 $399 Future IGLOO2 RISC-V Creative Development Board Future’s IGLOO2 RISC-V Creative Development Board includes • MikroBUS™-compatible expansion headers • Microsemi IGLOO2 FPGA • PMOD™-compatible expansion connector • Microsemi  LX7167 DC/DC  • Alliance 32M × 16-bit DDR2 synchronous DRAM (SDRAM) • Microchip 64 Mbit serial flash • Microchip six synchronous sampling 16/24-bit resolution Delta-Sigma A/D converters • User buttons and LED • 25K (LE) FPGA, offering the lowest cost-of-entry for both software and hardware engineers who want to evaluate and implement their own unique designs • Microsemi’s LX series power devices • On-board FTDI USB-JTAG adaptor • Arduino™-compatible expansion headers Part Number FUTUREM2GL-EVB Supported Device Price M2GL025 $99.95 (available from Future Electronics) www.microsemi.com/products/fpga-soc/design-resources/dev-kits-boards 23 Imaging and Video Solution Microsemi provides a complete, easy-to-use development environment for designing low-power and secure video processing applications. The solution includes an IP suite with modular IP, and FPGA mezzanine card (FMC) for the SmartFusion2 advanced development kit, and a software GUI. The IP suite currently supports SmartFusion2 SoC FPGA and IGLOO2 FPGA product families. Support for the PolarFire FPGA product family is currently in development. Key Features • Modular IP suite • Support for MIPI CSI-2 or parallel sensor interfaces • Display interface for 7:1 LVDS or HDMI • The most secure FPGA to protect your design IP • Easy-to-use software GUI for real-time audio and video configuration Solution Overview Hardware MIPI CSI-2 or Parallel Sensor FMC daughter card options (AR330 Image Sensor Board included) • Imaging and video FMC daughter card with camera module options • SmartFusion2 advanced development kit or PolarFire Evaluation Kit (Sold separately and includes a one-year Gold license of Libero SoC software) IP Suite The following imaging and video processing IP cores are included in Libero® SoC, a comprehensive software toolset for designing with Microsemi FPGAs and SoC FPGAs. The IP suite supports SmartFusion2, IGLOO2 and RTG4 product families, with PolarFire support currently in development • Sensor interface—Parallel, MIPI CSI-2 • Bayer conversion • Color-space conversion • Image-edge detection • Video scaler • Alpha blending and overlay • Image sharpening filter • Image de-noising filter (under development) • Display control (LVDS and parallel RGB-HDMI) • Source code in Verilog (requires licensing fee) Imaging and Video IP Cores in Libero SoC Catalog Software GUI Enables video and audio configurations • GUI communicates with IP blocks through SmartFusion2 ARM® Cortex®-M3 processor • Supports the following demos: • Camera sensor to display • Image edge detection Software GUI for Imaging and Video Kit 24 Motor Control Solution Build Safe and Reliable Deterministic Motor Control Applications Microsemi’s Deterministic Motor Control Solution is specially designed to meet the challenging requirements of performance, reliability, and safety in an easy-to-use environment. The solution is compliant with industry coding standards for developing safe and reliable software for embedded applications. Microsemi offers a modular intellectual property (IP) portfolio, tools, reference designs, kits, and software to control motors such as permanent-magnet synchronous motor (PMSM)/brushless DC (BLDC), and stepper motors. Ordering Code SF2-MC-STARTER-KIT Supported Device Price M2S010-FG484 $899 Field Oriented Control-System Diagram Speed Ref + - Speed PI Controller Iq* + Id-PI Controller - Vq Speed Actual Inverse Park Transform + - Inverse Clarko Transform Vabc SVPWM θ Vd Iq*=0 Vαβ Iq-PI Controller Angle and Speed Estimation θ Id Actual Id Actual Park Transform lαβ Clarke Transform labc Current Measurement Reference Design Features • Dual-axis deterministic motor control on a single system-on-chip (SoC) field programmable gate array (FPGA) • Efficient, reliable, and safe drive/motor control with product longevity • Compact solution saves board space and reduces product size • Motor performance is tested for speeds exceeding 100,000 RPM for sensorless field-oriented control (FOC) • Low latency of 1 μs for FOC loop from ADC measurement to PWM enables switching frequencies up to 500 kHz • Design flexibility with modular IP suite • Advanced safety features, such as automatic motor restart and overcurrent protection • SoC integration of system functions lowers total cost of ownership (TCO) http://www.microsemi.com/applications/motor-control#overview 25 Microsemi Intellectual Property Microsemi enhances your design productivity by providing an extensive suite of proven and optimized IP Cores for use with Microsemi FPGAs and SoC FPGA that covers key markets and applications. IPs are organized as either Microsemi-developed DirectCoresTM or third-party-developed CompanionCores.TM IP cores are searchable at: http://soc.microsemi.com/products/ip/search/default.aspx Microsemi DirectCore Microsemi CompanionCore Microsemi develops and supports DirectCore IP cores for applications with the widest possible interest. Most DirectCores are available for free within our Libero tool suite. Common communications interfaces, peripherals, and processing elements are all available as DirectCores. The following table shows Microsemi’s DirectCore offerings. Microsemi CompanionCore Partners use their detailed system knowledge of common applications to craft optimized solutions targeted for Microsemi FPGAs and SoC FPGA. CompanionCores are available for purchase from our partners and are easily integrated into your design using our Libero tool suite. The following table shows examples of CompanionCore Partners offerings. Functionality DirectCore Examples Functionality CompanionCore Examples Connectivity UART,16550, 429, PCI, JESD204B Connectivity CAN, CANFD, PCIE, VME DSP FFT, JPEG, RS, DVBMOD DSP Memory Controller Processor CIC, FFT, FIR, CORDIC, RS FIFO, DDR, QDR, SDR, MemCtrl, MMC Cortex-M3, 8051, 8051s, ARM7TDMI Ethernet MII, RGMII, GMII, SGMII Security DES, 3DES, AES, SHA Error Correction Memory Controller Processor Security SDRAMDDR, Flash, SD 80188, 80186, LEON3, 6809 MD5, ARC4, RNG, ZUC, AES, SHA, 802.1ae (MACSec) Error Correction EDAC, RC RS Microsemi IP Available for Use with Libero Please contact your local Microsemi sales representative for information on price and licensing, as certain Microsemi IPs may require a separate license. CompanionCores supported by Microsemi are available at: http://www.microsemi.com/products/fpga-soc/design-resources/ip-cores#companioncores. Product Name Obfuscated RTL Available for Purchase RTL Source Available for Purchase Not available RTL source Core1553BRM Obfuscated RTL RTL source Core1553BRT, Core1553BRT_APB Obfuscated RTL RTL source Core429, Core429_APB Obfuscated RTL RTL source CorePCIF, CorePCIF_AHB Obfuscated RTL RTL source CoreTSE, CoreTSE_AHB Obfuscated RTL RTL source Not available RTL source CoreFFT CoreCIC Notes: 1. Additional cores and configurations can be found on the website and in core handbooks. 26 PolarFire IP Microsemi enhances your design productivity by providing an extensive suite of proven and optimized IP cores for use with Microsemi FPGAs. Our extensive suite of IP cores covers all key markets and applications. Our cores are organized as either Microsemi-developed DirectCores or third-party-developed CompanionCores. Most DirectCores are available for free within our Libero tool suite and include common communications interfaces, peripherals, and processing elements. PolarFire IP and Demo Designs PolarFire IP (Available Now) • AXI4Interconnect • CoreFIR • CRYPTO • Core3DES • CoreGPIO • DDR3 • CoreABC • CoreI2C • DPSRAM • CoreAHBLite • CoreJESD204BRX • DRI • CoreAHBL2AHBL Bridge • CoreJESD204BTX • PCIe End Point • CoreAHBLTOAXI • CoreMDIO_APB • TAMPER • CoreAHBLSRAM • CorePCS • TPSRAM • CoreAHBtoAPB3 • CorePWM • UPROM • CoreAPB3 • CoreRSDEC • URAM • CoreAXI4DMA Controller • CoreRSENC • 1GbE IO-CDR • CoreAXI4SRAM • CoreRISCV • Core10GMAC 10GBASE-R • CoreAXItoAHBL • CoreRMII • Core429 • CoreCORDIC • CoreSPI • CoreSGMII • CoreDDRMemCtrlr • CoreSysServices_PF • CoreTSE, CoreTSE_AHB • CoreDDS (NCO) • CoreUART • DDR4 • CoreDES • CoreUART_APB • CoreRGMII • CoreFFT • CoreLSM • CoreFIFO • CPRI (PHY only) PolarFire IP (Soon to Be Released) • CorePCIF/CorePCIF_AHB • CoreQDR • CoreCIC • HD-SDI Tx/HD-SDI Rx (3G) • 10GBASE-KR • CoreQSPI • CoreXAUI • LPDDR3 • CSI-2 Tx • CoreRXAUI • 10G NGPON • CoreSquareRoot • Core1553BRM • CSI-2 Rx • Fixed Point to Floating • Core1553BRT/Core1553BRT_APB • QSGMII • PCIe Root Port • 12G SDI 27 Microsemi is continually adding new products to its industry-leading portfolio. For the most recent updates to our product line and for detailed information and specifications, please call, email, or visit our website. Toll-free: 800-713-4113 sales.support@microsemi.com www.microsemi.com Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Fax: +1 (949) 215-4996 Email: sales.support@microsemi.com www.microsemi.com ©2018 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world’s standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California and has approximately 4,800 employees globally. Learn more at www.microsemi.com. Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice. MS2-004-15 55700049-06/1.18