APT15D120KG

1200V 15A APT15D120K APT15D120KG* *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE (K) PRODUCT APPLICATIONS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • PFC PRODUCT FEATURES • Ultrafast Recovery Times • Soft Recovery Characteristics • Popular TO-220 Package • Low Forward Voltage • Low Leakage Current PRODUCT BENEFITS • Low Losses • Low Noise Switching • Cooler Operation • Higher Reliability Systems • Increased System Power Density 1 2 1 2 1 - Cathode 2 - Anode Back of Case - Cathode MAXIMUM RATINGS Symbol VR VRRM VRWM IF(AV) IF(RMS) IFSM TJ,TSTG TL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage All Ratings: TC = 25°C unless otherwise specified. APT15D120K(G) UNIT 1200 Volts Maximum Average Forward Current (TC = 123°C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Operating and StorageTemperature Range Lead Temperature for 10 Sec. 15 27 110 -55 to 175 300 °C Amps STATIC ELECTRICAL CHARACTERISTICS Symbol Characteristic / Test Conditions IF = 15A VF Forward Voltage IF = 30A IF = 15A, TJ = 125°C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V VR = VR Rated VR = VR Rated, TJ = 125°C MIN TYP MAX UNIT 2.0 2.3 1.8 2.5 Volts 250 500 17 μA pF 053-0019 Rev C 2-2010 Microsemi Website - http://www.microsemi.com DYNAMIC CHARACTERISTICS Symbol trr trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Reverse Recovery Time Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 15A, diF/dt = -1000A/μs VR = 800V, TC = 125°C IF = 15A, diF/dt = -200A/μs VR = 800V, TC = 125°C IF = 15A, diF/dt = -200A/μs VR = 800V, TC = 25°C Test Conditions IF = 1A, diF/dt = -100A/μs, VR = 30V, TJ = 25°C MIN TYP APT15D120K(G) MAX UNIT ns nC 32 260 480 4 370 1300 9 140 2000 28 - - Amps ns nC Amps ns nC Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC RθJA WT Characteristic / Test Conditions Junction-to-Case Thermal Resistance Junction-to-Ambient Thermal Resistance Package Weight MIN TYP MAX UNIT °C/W oz g 1.18 80 0.07 1.9 10 1.1 lb•in N•m Torque Maximum Mounting Torque Microsemi Reserves the right to change, without notice, the specifications and information contained herein. 1.20 Z JC, THERMAL IMPEDANCE (°C/W) θ 0.9 1.00 0.80 0.60 0.40 0.20 0 0.7 0.5 Note: PDM 0.3 SINGLE PULSE t1 t2 0.1 0.05 10 -5 Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC t 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION 10-4 053-0019 Rev C 2-2010 TYPICAL PERFORMANCE CURVES 50 trr, REVERSE RECOVERY TIME (ns) 500 30A 400 15A APT15D120K(G) T = 125°C J V = 800V R IF, FORWARD CURRENT (A) 40 30 TJ = 150°C TJ = 25°C 10 TJ = 125°C TJ = -55°C 0.5 1 1.5 2 2.5 3 3.5 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 3500 0 0 300 20 200 7.5A 100 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/μs) Figure 3. Reverse Recovery Time vs. Current Rate of Change IRRM, REVERSE RECOVERY CURRENT (A) 35 30 25 20 15 10 7.5A 5 0 T = 125°C J V = 800V R 0 Qrr, REVERSE RECOVERY CHARGE (nC) T = 125°C J V = 800V R 3000 2500 2000 1500 1000 500 0 30A 30A 15A 15A 7.5A 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/μs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.2 Kf, DYNAMIC PARAMETERS (Normalized to 1000A/μs) 1.0 IRRM 0.8 trr trr Qrr 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/μs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 35 30 25 IF(AV) (A) 20 15 10 5 0 Duty cycle = 0.5 T = 175°C J 0.6 0.4 0.2 0.0 Qrr 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 140 CJ, JUNCTION CAPACITANCE (pF) 120 100 80 60 40 20 0 0 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 25 50 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 1 053-0019 Rev C 2-2010 APT15D120K(G) Vr +18V 0V D.U.T. 30μH trr/Qrr Waveform diF /dt Adjust APT10035LLL PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 2 3 4 IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero 1 4 5 3 2 0.25 IRRM trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr. 5 Figure 10, Diode Reverse Recovery Waveform and Definitions TO-220 (K) Package Outline e3 100% Sn 0.404 [10.26] 0.393 [9.98] Cathode 0.114 [2.90] 0.102 [2.59] ø0.153 [3.89] ø0.149 [3.78] 0.508 [12.90] 0.492 [12.50] 0.362 [9.19] 0.354 [8.99] 0.058 [1.47] 0.047 [1.19] 0.186 [4.72] 0.174 [4.42] 0.154 [3.91] 0.134 [3.40] 0.531 [13.49] 0.515 [13.08] 0.057 [1.45] 0.047 [1.19] 0.110 [2.79] 0.099 [2.51] Cathode Anode 053-0019 Rev C 2-2010 0.100 [2.54] TYP 0.204 [5.18] 0.196 [4.98] 0.034 [0.86] 0.030 [0.76] 0.018 [0.46] 0.014 [0.36] Microsemi’s products are covered by one or more of U.S. patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 6,939,743, 7,352,045 5,283,201 5,801,417 5,648,283 7,196,634 6,664,594 7,157,886 6,939,743 7,342,262 and foreign patents. US and Foreign patents pending. All Rights Reserved.