1
2
TO -24
7
1 - Cathode 2 2 - Anode 1
D3PAK
1 2
1
2
APT15DS60BG 600V APT15DS60SG 600V
*G
13A 13A
Denotes RoHS Compliant, Pb Free Terminal Finish.
2-300V HIGH FREQUENCY SOFT RECOVERY RECTIFIER DIODES IN SERIES
PRODUCT APPLICATIONS
• Anti-Parallel Diode • • • • •
-Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) Induction Heating High Speed Rectifiers
PRODUCT FEATURES
• Ultrafast Recovery Times • Soft Recovery Characteristics • Popular TO-247 Package or • Low Forward Voltage
Surface Mount D3PAK Package
PRODUCT BENEFITS
• Low Losses • Low Noise Switching • Cooler Operation • Higher Reliability Systems • Increased System Power
Density
• High Blocking Voltage • Low Leakage Current
MAXIMUM RATINGS
Symbol VR VRRM VRWM IF(AV) IF(RMS) IFSM TJ,TSTG TL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage
All Ratings: TC = 25°C unless otherwise specified.
APT15DS60B_SG UNIT
600
Volts
Maximum Average Forward Current (TC = 77°C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Operating and StorageTemperature Range Lead Temperature for 10 Sec.
13 17 110 -55 to 150 300
°C Amps
STATIC ELECTRICAL CHARACTERISTICS
Symbol IF = 15A VF Forward Voltage IF = 30A IF = 15A, TJ = 125°C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V
APT Website - http://www.advancedpower.com
MIN
TYP
MAX
UNIT
3.2 4.2 2.4
4.0
Volts
VR = 600V, TJ = 125°C
500 24
µA pF
053-3006 Rev C
2-2007
VR = 600V
150
DYNAMIC CHARACTERISTICS
Symbol trr trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Test Conditions MIN TYP
APT15DS60B_SG
MAX UNIT ns nC
Reverse Recovery Time I = 1A, di /dt = -100A/µs, V = 30V, T = 25°C F F R J Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 15A, diF/dt = -200A/µs VR = 400V, TC = 125°C IF = 15A, diF/dt = -200A/µs VR = 400V, TC = 25°C
13 14 12 1.5 31 85 4.7 20 160 18 -
-
Amps ns nC Amps ns nC Amps
IF = 15A, diF/dt = -1000A/µs VR = 400V, TC = 125°C
-
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol RθJC RθJA WT Characteristic / Test Conditions Junction-to-Case Thermal Resistance Junction-to-Ambient Thermal Resistance Package Weight MIN TYP MAX UNIT °C/W oz g
1.5 40 0.22 5.9 10 1.1
Torque
Maximum Mounting Torque
lb•in N•m
APT Reserves the right to change, without notice, the specifications and information contained herein. 1.60
Z JC, THERMAL IMPEDANCE (°C/W) θ
1.40 1.20 1.00 0.80 0.60
0.9
0.7
0.5
Note:
PDM t1 t2
0.3 0.40 0.20 0 10-5 0.1 0.05 10-4 10-3 10-2 10-1 SINGLE PULSE
Peak TJ = PDM x ZθJC + TC
Duty Factor D = t1/t2
1.0 10 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION
TJ ( C)
2-2007
0.355 Dissipated Power (Watts) 0.00229 0.0311 0.444 0.854
TC ( C)
0.291 ZEXT are the external thermal impedances: Case to sink, sink to ambient, etc. Set to zero when modeling only the case to junction.
053-3006 Rev C
FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL
ZEXT
TYPICAL PERFORMANCE CURVES
60 50
IF, FORWARD CURRENT (A) trr, REVERSE RECOVERY TIME (ns)
40 30A 35 30 25 20 15 10 5 0
TJ = 125° C VR = 400V
APT15DS60B_SG
15A 7.5A
40 30 20 10 TJ = -55°C 0 0 1 2 3 4 5 6 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage TJ = 150°C TJ = 125°C TJ = 25°C
0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/ µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 20
IRRM, REVERSE RECOVERY CURRENT (A)
TJ = 125° C VR = 400V
200
Qrr, REVERSE RECOVERY CHARGE (nC)
TJ = 125° C VR = 400V
30A 15A
150
16
30A
12 15A
100 7.5A 50
8 7.5A
4
200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/ µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.4 1.2 1.0 0.8 0.6 Qrr 0.4 0.2 0.0 IRRM
IF(AV) (A)
0
0
0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/ µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 20
0
Kf, DYNAMIC PARAMETERS (Normalized to 800A/µs)
trr trr
Qrr 16
12
8
4
Duty cycle = 0.5 TJ = 150°C
25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 120
CJ, JUNCTION CAPACITANCE (pF)
0
50 75 100 125 150 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature
0
25
100 80 60 40 20 0
2-2007
10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage
.4
1
053-3006 Rev C
APT15DS60B_SG
Vr +18V 0V D.U.T. 30µH
trr/Qrr Waveform
diF /dt Adjust
APT6017BLL
PEARSON 2878 CURRENT TRANSFORMER
Figure 9. Diode Test Circuit
1 2 3 4
IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero
1
4
5 3 2
trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr.
0.25 IRRM
5
Figure 10, Diode Reverse Recovery Waveform and Definitions
e1 SAC: Tin, Silver, Copper
3 100% Sn e1 SAC: Tin, Silver, Copper
TO-247 Package Outline
4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC 20.80 (.819) 21.46 (.845) 3.50 (.138) 3.81 (.150) 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244)
D PAK Package Outline
4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 15.85 (.624) 16.05(.632) 1.00 (.039) 1.15(.045) 13.30 (.524) 13.60(.535)
3
18.70 (.736) 19.10 (.752) 0.40 (.016) 0.65 (.026)
12.40 (.488) 12.70 (.500)
4.50 (.177) Max.
2-2007
0.40 (.016) 0.79 (.031)
19.81 (.780) 20.32 (.800)
1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055)
0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114)
1.15 (.045) 1.45 (.057)
1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 5.45 (.215) BSC (2 Plcs.)
2.40 (.094) 2.70 (.106) (Base of Lead)
053-3006 Rev C
Heat Sink (Isolated) and Leads are Plated
Anode
2.21 (.087) 2.59 (.102)
Cathode
10.90 (.430) BSC
Dimensions in Millimeters and (Inches)
Anode (Isolated) Cathode Dimensions in Millimeters (Inches)
APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.